Use more TCL_AUTO_LENGTH, when appropriate

Add TIP #494-compatible definitions of TCL_IO_FAILURE/TCL_AUTO_LENGTH, and use it in some appropriate places.

.project

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <projectDescription>
-	<name>tcl8</name>
+	<name>tcl9</name>
 	<comment></comment>
 	<projects>
 	</projects>

README

@@ -1,5 +1,5 @@
 README:  Tcl
-    This is the Tcl 8.7a2 source distribution.
+    This is the Tcl 9.0a0 source distribution.
 	http://sourceforge.net/projects/tcl/files/Tcl/
     You can get any source release of Tcl from the URL above.
 
@@ -49,7 +49,7 @@ and selling it either in whole or in part.  See the file
 
 Extensive documentation is available at our website.
 The home page for this release, including new features, is
-	http://www.tcl.tk/software/tcltk/8.7.html
+	http://www.tcl.tk/software/tcltk/9.0.html
 
 Detailed release notes can be found at the file distributions page
 by clicking on the relevant version.
@@ -61,9 +61,9 @@ Information about Tcl itself can be found at
 There have been many Tcl books on the market.  Many are mentioned in the Wiki:
 	http://wiki.tcl.tk/_/ref?N=25206
 
-To view the complete set of reference manual entries for Tcl 8.7 online,
+To view the complete set of reference manual entries for Tcl 9.0 online,
 visit the URL:
-	http://www.tcl.tk/man/tcl8.7/
+	http://www.tcl.tk/man/tcl9.0/
 
 2a. Unix Documentation
 ----------------------

compat/opendir.c

@@ -28,7 +28,7 @@ opendir(
     if ((fd = open(myname, 0, 0)) == -1) {
 	return NULL;
     }
-    dirp = (DIR *) ckalloc(sizeof(DIR));
+    dirp = (DIR *) Tcl_Alloc(sizeof(DIR));
     if (dirp == NULL) {
 	/* unreachable? */
 	close(fd);
@@ -106,5 +106,5 @@ closedir(
     close(dirp->dd_fd);
     dirp->dd_fd = -1;
     dirp->dd_loc = 0;
-    ckfree(dirp);
+    Tcl_Free(dirp);
 }

compat/waitpid.c

@@ -100,7 +100,7 @@ waitpid(
 	} else {
 	    prevPtr->nextPtr = waitPtr->nextPtr;
 	}
-	ckfree(waitPtr);
+	Tcl_Free(waitPtr);
 	return result;
     }
 
@@ -156,7 +156,7 @@ waitpid(
 		goto waitAgain;
 	    }
 	}
-	waitPtr = (WaitInfo *) ckalloc(sizeof(WaitInfo));
+	waitPtr = (WaitInfo *) Tcl_Alloc(sizeof(WaitInfo));
 	waitPtr->pid = result;
 	waitPtr->status = status;
 	waitPtr->nextPtr = deadList;

doc/AddErrInfo.3

@@ -9,7 +9,7 @@
 .so man.macros
 .BS
 .SH NAME
-Tcl_GetReturnOptions, Tcl_SetReturnOptions, Tcl_AddErrorInfo, Tcl_AppendObjToErrorInfo, Tcl_AddObjErrorInfo, Tcl_SetObjErrorCode, Tcl_SetErrorCode, Tcl_SetErrorCodeVA, Tcl_SetErrorLine, Tcl_GetErrorLine, Tcl_PosixError, Tcl_LogCommandInfo \- retrieve or record information about errors and other return options
+Tcl_GetReturnOptions, Tcl_SetReturnOptions, Tcl_AddErrorInfo, Tcl_AppendObjToErrorInfo, Tcl_AddObjErrorInfo, Tcl_SetObjErrorCode, Tcl_SetErrorCode, Tcl_SetErrorLine, Tcl_GetErrorLine, Tcl_PosixError, Tcl_LogCommandInfo \- retrieve or record information about errors and other return options
 .SH SYNOPSIS
 .nf
 \fB#include <tcl.h>\fR
@@ -30,8 +30,6 @@ int
 .sp
 \fBTcl_SetErrorCode\fR(\fIinterp, element, element, ... \fB(char *) NULL\fR)
 .sp
-\fBTcl_SetErrorCodeVA\fR(\fIinterp, argList\fR)
-.sp
 \fBTcl_GetErrorLine\fR(\fIinterp\fR)
 .sp
 \fBTcl_SetErrorLine\fR(\fIinterp, lineNum\fR)
@@ -60,10 +58,10 @@ unless \fIlength\fR is negative.
 .AP Tcl_Obj *objPtr in
 A message to be appended to the \fB\-errorinfo\fR return option
 in the form of a Tcl_Obj value.
-.AP int length in
+.AP size_t length in
 The number of bytes to copy from \fImessage\fR when
 appending to the \fB\-errorinfo\fR return option.
-If negative, all bytes up to the first null byte are used.
+If (size_t)-1, all bytes up to the first null byte are used.
 .AP Tcl_Obj *errorObjPtr in
 The \fB\-errorcode\fR return option will be set to this value.
 .AP char *element in
@@ -245,9 +243,6 @@ The procedure \fBTcl_SetErrorCode\fR is also used to set the
 record instead of a value. Otherwise, it is similar to
 \fBTcl_SetObjErrorCode\fR in behavior.
 .PP
-\fBTcl_SetErrorCodeVA\fR is the same as \fBTcl_SetErrorCode\fR except that
-instead of taking a variable number of arguments it takes an argument list.
-.PP
 The procedure \fBTcl_GetErrorLine\fR is used to read the integer value
 of the \fB\-errorline\fR return option without the overhead of a full
 call to \fBTcl_GetReturnOptions\fR.  Likewise, \fBTcl_SetErrorLine\fR

doc/Alloc.3

@@ -8,7 +8,7 @@
 .so man.macros
 .BS
 .SH NAME
-Tcl_Alloc, Tcl_Free, Tcl_Realloc, Tcl_AttemptAlloc, Tcl_AttemptRealloc, ckalloc, ckfree, ckrealloc, attemptckalloc, attemptckrealloc \- allocate or free heap memory
+Tcl_Alloc, Tcl_Free, Tcl_Realloc, Tcl_AttemptAlloc, Tcl_AttemptRealloc \- allocate or free heap memory
 .SH SYNOPSIS
 .nf
 \fB#include <tcl.h>\fR
@@ -19,29 +19,14 @@ char *
 void
 \fBTcl_Free\fR(\fIptr\fR)
 .sp
-char *
+void *
 \fBTcl_Realloc\fR(\fIptr, size\fR)
 .sp
-char *
+void *
 \fBTcl_AttemptAlloc\fR(\fIsize\fR)
 .sp
-char *
+void *
 \fBTcl_AttemptRealloc\fR(\fIptr, size\fR)
-.sp
-char *
-\fBckalloc\fR(\fIsize\fR)
-.sp
-void
-\fBckfree\fR(\fIptr\fR)
-.sp
-char *
-\fBckrealloc\fR(\fIptr, size\fR)
-.sp
-char *
-\fBattemptckalloc\fR(\fIsize\fR)
-.sp
-char *
-\fBattemptckrealloc\fR(\fIptr, size\fR)
 .SH ARGUMENTS
 .AS char *size
 .AP "unsigned int" size in
@@ -79,14 +64,10 @@ allocation fails, these functions will return NULL.  Note that on some
 platforms, but not all, attempting to allocate a zero-sized block of
 memory will also cause these functions to return NULL.
 .PP
-The procedures \fBckalloc\fR, \fBckfree\fR, \fBckrealloc\fR,
-\fBattemptckalloc\fR, and \fBattemptckrealloc\fR are implemented
-as macros.  Normally, they are synonyms for the corresponding
-procedures documented on this page.  When Tcl and all modules
-calling Tcl are compiled with \fBTCL_MEM_DEBUG\fR defined, however,
-these macros are redefined to be special debugging versions
-of these procedures.  To support Tcl's memory debugging within a
-module, use the macros rather than direct calls to \fBTcl_Alloc\fR, etc.
+When a module or Tcl itself is compiled with \fBTCL_MEM_DEBUG\fR defined,
+the procedures \fBTcl_Alloc\fR, \fBTcl_Free\fR, \fBTcl_Realloc\fR,
+\fBTcl_AttemptAlloc\fR, and \fBTcl_AttempRealloc\fR are implemented
+as macros, redefined to be special debugging versions of these procedures.
 
 .SH KEYWORDS
 alloc, allocation, free, malloc, memory, realloc, TCL_MEM_DEBUG

doc/AllowExc.3

@@ -30,8 +30,7 @@ or \fBTCL_RETURN\fR, then Tcl normally converts this into a \fBTCL_ERROR\fR
 return with an appropriate message.  The particular script
 evaluation procedures of Tcl that act in the manner are
 \fBTcl_EvalObjEx\fR, \fBTcl_EvalObjv\fR, \fBTcl_Eval\fR, \fBTcl_EvalEx\fR,
-\fBTcl_GlobalEval\fR, \fBTcl_GlobalEvalObj\fR, \fBTcl_VarEval\fR and
-\fBTcl_VarEvalVA\fR.
+\fBTcl_GlobalEval\fR, \fBTcl_GlobalEvalObj\fR and \fBTcl_VarEval\fR.
 .PP
 However, if \fBTcl_AllowExceptions\fR is invoked immediately before
 calling one of those a procedures, then arbitrary completion

doc/AssocData.3

@@ -13,7 +13,7 @@ Tcl_GetAssocData, Tcl_SetAssocData, Tcl_DeleteAssocData \- manage associations o
 .nf
 \fB#include <tcl.h>\fR
 .sp
-ClientData
+void *
 \fBTcl_GetAssocData\fR(\fIinterp, key, delProcPtr\fR)
 .sp
 \fBTcl_SetAssocData\fR(\fIinterp, key, delProc, clientData\fR)
@@ -31,7 +31,7 @@ Procedure to call when \fIinterp\fR is deleted.
 .AP Tcl_InterpDeleteProc **delProcPtr in
 Pointer to location in which to store address of current deletion procedure
 for association.  Ignored if NULL.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value associated with the given key in this
 interpreter.  This data is owned by the caller.
 .BE
@@ -64,7 +64,7 @@ the type \fBTcl_InterpDeleteProc\fR:
 .PP
 .CS
 typedef void \fBTcl_InterpDeleteProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Interp *\fIinterp\fR);
 .CE
 .PP

doc/Async.3

@@ -30,7 +30,7 @@ int
 .AS Tcl_AsyncHandler clientData
 .AP Tcl_AsyncProc *proc in
 Procedure to invoke to handle an asynchronous event.
-.AP ClientData clientData in
+.AP void *clientData in
 One-word value to pass to \fIproc\fR.
 .AP Tcl_AsyncHandler async in
 Token for asynchronous event handler.
@@ -84,7 +84,7 @@ type \fBTcl_AsyncProc\fR:
 .PP
 .CS
 typedef int \fBTcl_AsyncProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Interp *\fIinterp\fR,
         int \fIcode\fR);
 .CE

doc/Backslash.3

@@ -1,47 +0,0 @@
-'\"
-'\" Copyright (c) 1989-1993 The Regents of the University of California.
-'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
-'\"
-'\" See the file "license.terms" for information on usage and redistribution
-'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-'\"
-.TH Tcl_Backslash 3 "8.1" Tcl "Tcl Library Procedures"
-.so man.macros
-.BS
-.SH NAME
-Tcl_Backslash \- parse a backslash sequence
-.SH SYNOPSIS
-.nf
-\fB#include <tcl.h>\fR
-.sp
-char
-\fBTcl_Backslash\fR(\fIsrc, countPtr\fR)
-.SH ARGUMENTS
-.AS char *countPtr out
-.AP char *src in
-Pointer to a string starting with a backslash.
-.AP int *countPtr out
-If \fIcountPtr\fR is not NULL, \fI*countPtr\fR gets filled
-in with number of characters in the backslash sequence, including
-the backslash character.
-.BE
-
-.SH DESCRIPTION
-.PP
-The use of \fBTcl_Backslash\fR is deprecated in favor of
-\fBTcl_UtfBackslash\fR.
-.PP
-This is a utility procedure provided for backwards compatibility with
-non-internationalized Tcl extensions.  It parses a backslash sequence and
-returns the low byte of the Unicode character corresponding to the sequence.
-\fBTcl_Backslash\fR modifies \fI*countPtr\fR to contain the number of
-characters in the backslash sequence.
-.PP
-See the Tcl manual entry for information on the valid backslash sequences.
-All of the sequences described in the Tcl manual entry are supported by
-\fBTcl_Backslash\fR.
-.SH "SEE ALSO"
-Tcl(n), Tcl_UtfBackslash(3)
-
-.SH KEYWORDS
-backslash, parse

doc/ByteArrObj.3

@@ -29,8 +29,8 @@ unsigned char *
 .AP "const unsigned char" *bytes in
 The array of bytes used to initialize or set a byte-array value. May be NULL
 even if \fIlength\fR is non-zero.
-.AP int length in
-The length of the array of bytes.  It must be >= 0.
+.AP size_t length in
+The length of the array of bytes.
 .AP Tcl_Obj *objPtr in/out
 For \fBTcl_SetByteArrayObj\fR, this points to the value to be converted to
 byte-array type.  For \fBTcl_GetByteArrayFromObj\fR and

doc/CallDel.3

@@ -23,7 +23,7 @@ Tcl_CallWhenDeleted, Tcl_DontCallWhenDeleted \- Arrange for callback when interp
 Interpreter with which to associated callback.
 .AP Tcl_InterpDeleteProc *proc in
 Procedure to call when \fIinterp\fR is deleted.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to \fIproc\fR.
 .BE
 .SH DESCRIPTION
@@ -38,7 +38,7 @@ type \fBTcl_InterpDeleteProc\fR:
 .PP
 .CS
 typedef void \fBTcl_InterpDeleteProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Interp *\fIinterp\fR);
 .CE
 .PP

doc/Cancel.3

@@ -30,7 +30,7 @@ ORed combination of flag bits that specify additional options.
 For \fBTcl_CancelEval\fR, only \fBTCL_CANCEL_UNWIND\fR is currently
 supported.  For \fBTcl_Canceled\fR, only \fBTCL_LEAVE_ERR_MSG\fR and
 \fBTCL_CANCEL_UNWIND\fR are currently supported.
-.AP ClientData clientData in
+.AP void *clientData in
 Currently reserved for future use.
 It should be set to NULL.
 .BE

doc/ChnlStack.3

@@ -32,7 +32,7 @@ Tcl_Channel
 Interpreter for error reporting.
 .AP "const Tcl_ChannelType" *typePtr in
 The new channel I/O procedures to use for \fIchannel\fR.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to channel I/O procedures.
 .AP int mask in
 Conditions under which \fIchannel\fR will be used: OR-ed combination of

doc/Class.3

@@ -41,12 +41,12 @@ Tcl_Object
 int
 \fBTcl_ObjectDeleted\fR(\fIobject\fR)
 .sp
-ClientData
+void *
 \fBTcl_ObjectGetMetadata\fR(\fIobject, metaTypePtr\fR)
 .sp
 \fBTcl_ObjectSetMetadata\fR(\fIobject, metaTypePtr, metadata\fR)
 .sp
-ClientData
+void *
 \fBTcl_ClassGetMetadata\fR(\fIclass, metaTypePtr\fR)
 .sp
 \fBTcl_ClassSetMetadata\fR(\fIclass, metaTypePtr, metadata\fR)
@@ -56,7 +56,7 @@ Tcl_ObjectMapMethodNameProc
 .sp
 \fBTcl_ObjectSetMethodNameMapper\fR(\fIobject\fR, \fImethodNameMapper\fR)
 .SH ARGUMENTS
-.AS ClientData metadata in/out
+.AS void *metadata in/out
 .AP Tcl_Interp *interp in/out
 Interpreter providing the context for looking up or creating an object, and
 into whose result error messages will be written on failure.
@@ -83,7 +83,7 @@ are not arguments to any constructors.
 .AP Tcl_ObjectMetadataType *metaTypePtr in
 The type of \fImetadata\fR being set with \fBTcl_ClassSetMetadata\fR or
 retrieved with \fBTcl_ClassGetMetadata\fR.
-.AP ClientData metadata in
+.AP void *metadata in
 An item of metadata to attach to the class, or NULL to remove the metadata
 associated with a particular \fImetaTypePtr\fR.
 .AP "Tcl_ObjectMapMethodNameProc" "methodNameMapper" in
@@ -171,7 +171,7 @@ a class or object.
 .PP
 .CS
 typedef void \fBTcl_ObjectMetadataDeleteProc\fR(
-        ClientData \fImetadata\fR);
+        void *\fImetadata\fR);
 .CE
 .PP
 The \fImetadata\fR argument gives the address of the metadata to be
@@ -184,8 +184,8 @@ associated with a class or object.
 .CS
 typedef int \fBTcl_CloneProc\fR(
         Tcl_Interp *\fIinterp\fR,
-        ClientData \fIsrcMetadata\fR,
-        ClientData *\fIdstMetadataPtr\fR);
+        void *\fIsrcMetadata\fR,
+        void **\fIdstMetadataPtr\fR);
 .CE
 .PP
 The \fIinterp\fR argument gives a place to write an error message when the

doc/CrtChannel.3

@@ -17,7 +17,7 @@ Tcl_CreateChannel, Tcl_GetChannelInstanceData, Tcl_GetChannelType, Tcl_GetChanne
 Tcl_Channel
 \fBTcl_CreateChannel\fR(\fItypePtr, channelName, instanceData, mask\fR)
 .sp
-ClientData
+void *
 \fBTcl_GetChannelInstanceData\fR(\fIchannel\fR)
 .sp
 const Tcl_ChannelType *
@@ -128,7 +128,7 @@ by any other channel. Can be NULL, in which case the channel is
 created without a name. If the created channel is assigned to one
 of the standard channels (\fBstdin\fR, \fBstdout\fR or \fBstderr\fR),
 the assigned channel name will be the name of the standard channel.
-.AP ClientData instanceData in
+.AP void *instanceData in
 Arbitrary one-word value to be associated with this channel.  This
 value is passed to procedures in \fItypePtr\fR when they are invoked.
 .AP int mask in
@@ -139,7 +139,7 @@ The channel to operate on.
 .AP int direction in
 \fBTCL_READABLE\fR means the input handle is wanted; \fBTCL_WRITABLE\fR
 means the output handle is wanted.
-.AP ClientData *handlePtr out
+.AP void **handlePtr out
 Points to the location where the desired OS-specific handle should be
 stored.
 .AP int size in
@@ -399,7 +399,7 @@ the generic layer to set blocking and nonblocking mode on the device.
 .PP
 .CS
 typedef int \fBTcl_DriverBlockModeProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         int \fImode\fR);
 .CE
 .PP
@@ -434,7 +434,7 @@ closed. \fICloseProc\fR must match the following prototype:
 .PP
 .CS
 typedef int \fBTcl_DriverCloseProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         Tcl_Interp *\fIinterp\fR);
 .CE
 .PP
@@ -456,7 +456,7 @@ following prototype:
 .PP
 .CS
 typedef int \fBTcl_DriverClose2Proc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         Tcl_Interp *\fIinterp\fR,
         int \fIflags\fR);
 .CE
@@ -487,7 +487,7 @@ internal buffer. \fIInputProc\fR must match the following prototype:
 .PP
 .CS
 typedef int \fBTcl_DriverInputProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         char *\fIbuf\fR,
         int \fIbufSize\fR,
         int *\fIerrorCodePtr\fR);
@@ -531,7 +531,7 @@ generic layer to transfer data from an internal buffer to the output device.
 .PP
 .CS
 typedef int \fBTcl_DriverOutputProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         const char *\fIbuf\fR,
         int \fItoWrite\fR,
         int *\fIerrorCodePtr\fR);
@@ -570,7 +570,7 @@ prototype:
 .PP
 .CS
 typedef int \fBTcl_DriverSeekProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         long \fIoffset\fR,
         int \fIseekMode\fR,
         int *\fIerrorCodePtr\fR);
@@ -600,7 +600,7 @@ following prototype:
 .PP
 .CS
 typedef Tcl_WideInt \fBTcl_DriverWideSeekProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         Tcl_WideInt \fIoffset\fR,
         int \fIseekMode\fR,
         int *\fIerrorCodePtr\fR);
@@ -622,7 +622,7 @@ the generic layer to set a channel type specific option on a channel.
 .PP
 .CS
 typedef int \fBTcl_DriverSetOptionProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         Tcl_Interp *\fIinterp\fR,
         const char *\fIoptionName\fR,
         const char *\fInewValue\fR);
@@ -663,7 +663,7 @@ channel. \fIgetOptionProc\fR must match the following prototype:
 .PP
 .CS
 typedef int \fBTcl_DriverGetOptionProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         Tcl_Interp *\fIinterp\fR,
         const char *\fIoptionName\fR,
         Tcl_DString *\fIoptionValue\fR);
@@ -701,7 +701,7 @@ notice events of interest on this channel.
 .PP
 .CS
 typedef void \fBTcl_DriverWatchProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         int \fImask\fR);
 .CE
 .PP
@@ -732,9 +732,9 @@ the generic layer to retrieve a device-specific handle from the channel.
 .PP
 .CS
 typedef int \fBTcl_DriverGetHandleProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         int \fIdirection\fR,
-        ClientData *\fIhandlePtr\fR);
+        void **\fIhandlePtr\fR);
 .CE
 .PP
 \fIInstanceData\fR is the same as the value passed to
@@ -761,7 +761,7 @@ It should be set to NULL.
 .PP
 .CS
 typedef int \fBTcl_DriverFlushProc\fR(
-        ClientData \fIinstanceData\fR);
+        void *\fIinstanceData\fR);
 .CE
 .PP
 This value can be retrieved with \fBTcl_ChannelFlushProc\fR, which returns
@@ -776,7 +776,7 @@ that occur on the underlying (stacked) channel.
 .PP
 .CS
 typedef int \fBTcl_DriverHandlerProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         int \fIinterestMask\fR);
 .CE
 .PP
@@ -805,7 +805,7 @@ might be maintaining using the calling thread as the associate. See
 .PP
 .CS
 typedef void \fBTcl_DriverThreadActionProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         int \fIaction\fR);
 .CE
 .PP
@@ -822,7 +822,7 @@ length. It can be NULL.
 .PP
 .CS
 typedef int \fBTcl_DriverTruncateProc\fR(
-        ClientData \fIinstanceData\fR,
+        void *\fIinstanceData\fR,
         Tcl_WideInt \fIlength\fR);
 .CE
 .PP

doc/CrtChnlHdlr.3

@@ -32,7 +32,7 @@ a zero value to temporarily disable an existing handler.
 .AP Tcl_FileProc *proc in
 Procedure to invoke whenever the channel indicated by \fIchannel\fR meets
 the conditions specified by \fImask\fR.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to \fIproc\fR.
 .BE
 .SH DESCRIPTION
@@ -48,7 +48,7 @@ what it means for a channel to be readable or writable.
 .PP
 .CS
 typedef void \fBTcl_ChannelProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         int \fImask\fR);
 .CE
 .PP

doc/CrtCloseHdlr.3

@@ -26,7 +26,7 @@ void
 The channel for which to create or delete a close callback.
 .AP Tcl_CloseProc *proc in
 The procedure to call as the callback.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to \fIproc\fR.
 .BE
 .SH DESCRIPTION
@@ -38,7 +38,7 @@ Arbitrary one-word value to pass to \fIproc\fR.
 .PP
 .CS
 typedef void \fBTcl_CloseProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 The \fIclientData\fR is the same as the value provided in the call to

doc/CrtCommand.3

@@ -25,7 +25,7 @@ Name of command.
 .AP Tcl_CmdProc *proc in
 Implementation of new command:  \fIproc\fR will be called whenever
 \fIcmdName\fR is invoked as a command.
-.AP ClientData clientData in
+.AP voie *clientData in
 Arbitrary one-word value to pass to \fIproc\fR and \fIdeleteProc\fR.
 .AP Tcl_CmdDeleteProc *deleteProc in
 Procedure to call before \fIcmdName\fR is deleted from the interpreter;
@@ -75,7 +75,7 @@ and it returns NULL.
 .PP
 .CS
 typedef int \fBTcl_CmdProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Interp *\fIinterp\fR,
         int \fIargc\fR,
         const char *\fIargv\fR[]);
@@ -131,7 +131,7 @@ result that match the type \fBTcl_CmdDeleteProc\fR:
 .PP
 .CS
 typedef void \fBTcl_CmdDeleteProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 The \fIclientData\fR argument will be the same as the \fIclientData\fR

doc/CrtFileHdlr.3

@@ -29,7 +29,7 @@ a handler.
 .AP Tcl_FileProc *proc in
 Procedure to invoke whenever the file or device indicated
 by \fIfile\fR meets the conditions specified by \fImask\fR.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to \fIproc\fR.
 .BE
 .SH DESCRIPTION
@@ -51,7 +51,7 @@ type \fBTcl_FileProc\fR:
 .PP
 .CS
 typedef void \fBTcl_FileProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         int \fImask\fR);
 .CE
 .PP

doc/CrtMathFnc.3

@@ -1,162 +0,0 @@
-'\"
-'\" Copyright (c) 1989-1993 The Regents of the University of California.
-'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
-'\"
-'\" See the file "license.terms" for information on usage and redistribution
-'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-'\"
-.TH Tcl_CreateMathFunc 3 8.4 Tcl "Tcl Library Procedures"
-.so man.macros
-.BS
-.SH NAME
-Tcl_CreateMathFunc, Tcl_GetMathFuncInfo, Tcl_ListMathFuncs \- Define, query and enumerate math functions for expressions
-.SH "NOTICE OF EVENTUAL DEPRECATION"
-.PP
-The \fBTcl_CreateMathFunc\fR and \fBTcl_GetMathFuncInfo\fR functions
-are rendered somewhat obsolete by the ability to create functions for
-expressions by placing commands in the \fBtcl::mathfunc\fR namespace,
-as described in the \fBmathfunc\fR manual page; the API described on
-this page is not expected to be maintained indefinitely.
-.SH SYNOPSIS
-.nf
-\fB#include <tcl.h>\fR
-.sp
-void
-\fBTcl_CreateMathFunc\fR(\fIinterp, name, numArgs, argTypes, proc, clientData\fR)
-.sp
-int
-\fBTcl_GetMathFuncInfo\fR(\fIinterp, name, numArgsPtr, argTypesPtr, procPtr,
-                    clientDataPtr\fR)
-.sp
-Tcl_Obj *
-\fBTcl_ListMathFuncs\fR(\fIinterp, pattern\fR)
-.SH ARGUMENTS
-.AS Tcl_ValueType *clientDataPtr out
-.AP Tcl_Interp *interp in
-Interpreter in which new function will be defined.
-.AP "const char" *name in
-Name for new function.
-.AP int numArgs in
-Number of arguments to new function;  also gives size of \fIargTypes\fR array.
-.AP Tcl_ValueType *argTypes in
-Points to an array giving the permissible types for each argument to
-function.
-.AP Tcl_MathProc *proc in
-Procedure that implements the function.
-.AP ClientData clientData in
-Arbitrary one-word value to pass to \fIproc\fR when it is invoked.
-.AP int *numArgsPtr out
-Points to a variable that will be set to contain the number of
-arguments to the function.
-.AP Tcl_ValueType **argTypesPtr out
-Points to a variable that will be set to contain a pointer to an array
-giving the permissible types for each argument to the function which
-will need to be freed up using \fITcl_Free\fR.
-.AP Tcl_MathProc **procPtr out
-Points to a variable that will be set to contain a pointer to the
-implementation code for the function (or NULL if the function is
-implemented directly in bytecode).
-.AP ClientData *clientDataPtr out
-Points to a variable that will be set to contain the clientData
-argument passed to \fITcl_CreateMathFunc\fR when the function was
-created if the function is not implemented directly in bytecode.
-.AP "const char" *pattern in
-Pattern to match against function names so as to filter them (by
-passing to \fITcl_StringMatch\fR), or NULL to not apply any filter.
-.BE
-.SH DESCRIPTION
-.PP
-Tcl allows a number of mathematical functions to be used in
-expressions, such as \fBsin\fR, \fBcos\fR, and \fBhypot\fR.
-These functions are represented by commands in the namespace,
-\fBtcl::mathfunc\fR.  The \fBTcl_CreateMathFunc\fR function is
-an obsolete way for applications to add additional functions
-to those already provided by Tcl or to replace existing functions.
-It should not be used by new applications, which should create
-math functions using \fBTcl_CreateObjCommand\fR to create a command
-in the \fBtcl::mathfunc\fR namespace.
-.PP
-In the \fBTcl_CreateMathFunc\fR interface,
-\fIName\fR is the name of the function as it will appear in expressions.
-If \fIname\fR does not already exist in the \fB::tcl::mathfunc\fR
-namespace, then a new command is created in that namespace.
-If \fIname\fR does exist, then the existing function is replaced.
-\fINumArgs\fR and \fIargTypes\fR describe the arguments to the function.
-Each entry in the \fIargTypes\fR array must be
-one of \fBTCL_INT\fR, \fBTCL_DOUBLE\fR, \fBTCL_WIDE_INT\fR,
-or \fBTCL_EITHER\fR to indicate whether the corresponding argument must be an
-integer, a double-precision floating value, a wide (64-bit) integer,
-or any, respectively.
-.PP
-Whenever the function is invoked in an expression Tcl will invoke
-\fIproc\fR.  \fIProc\fR should have arguments and result that match
-the type \fBTcl_MathProc\fR:
-.PP
-.CS
-typedef int \fBTcl_MathProc\fR(
-        ClientData \fIclientData\fR,
-        Tcl_Interp *\fIinterp\fR,
-        Tcl_Value *\fIargs\fR,
-        Tcl_Value *\fIresultPtr\fR);
-.CE
-.PP
-When \fIproc\fR is invoked the \fIclientData\fR and \fIinterp\fR
-arguments will be the same as those passed to \fBTcl_CreateMathFunc\fR.
-\fIArgs\fR will point to an array of \fInumArgs\fR Tcl_Value structures,
-which describe the actual arguments to the function:
-.PP
-.CS
-typedef struct Tcl_Value {
-    Tcl_ValueType \fItype\fR;
-    long \fIintValue\fR;
-    double \fIdoubleValue\fR;
-    Tcl_WideInt \fIwideValue\fR;
-} \fBTcl_Value\fR;
-.CE
-.PP
-The \fItype\fR field indicates the type of the argument and is
-one of \fBTCL_INT\fR, \fBTCL_DOUBLE\fR or \fBTCL_WIDE_INT\fR.
-It will match the \fIargTypes\fR value specified for the function unless
-the \fIargTypes\fR value was \fBTCL_EITHER\fR. Tcl converts
-the argument supplied in the expression to the type requested in
-\fIargTypes\fR, if that is necessary.
-Depending on the value of the \fItype\fR field, the \fIintValue\fR,
-\fIdoubleValue\fR or \fIwideValue\fR
-field will contain the actual value of the argument.
-.PP
-\fIProc\fR should compute its result and store it either as an integer
-in \fIresultPtr->intValue\fR or as a floating value in
-\fIresultPtr->doubleValue\fR.
-It should set also \fIresultPtr->type\fR to one of
-\fBTCL_INT\fR, \fBTCL_DOUBLE\fR or \fBTCL_WIDE_INT\fR
-to indicate which value was set.
-Under normal circumstances \fIproc\fR should return \fBTCL_OK\fR.
-If an error occurs while executing the function, \fIproc\fR should
-return \fBTCL_ERROR\fR and leave an error message in the interpreter's result.
-.PP
-\fBTcl_GetMathFuncInfo\fR retrieves the values associated with
-function \fIname\fR that were passed to a preceding
-\fBTcl_CreateMathFunc\fR call.  Normally, the return code is
-\fBTCL_OK\fR but if the named function does not exist, \fBTCL_ERROR\fR
-is returned and an error message is placed in the interpreter's
-result.
-.PP
-If an error did not occur, the array reference placed in the variable
-pointed to by \fIargTypesPtr\fR is newly allocated, and should be
-released by passing it to \fBTcl_Free\fR.  Some functions (the
-standard set implemented in the core, and those defined by placing
-commands in the \fBtcl::mathfunc\fR namespace) do not have
-argument type information; attempting to retrieve values for
-them causes a NULL to be stored in the variable pointed to by
-\fIprocPtr\fR and the variable pointed to by \fIclientDataPtr\fR
-will not be modified.  The variable pointed to by \fInumArgsPointer\fR
-will contain -1, and no argument types will be stored in the variable
-pointed to by \fIargTypesPointer\fR.
-.PP
-\fBTcl_ListMathFuncs\fR returns a Tcl value containing a list of all
-the math functions defined in the interpreter whose name matches
-\fIpattern\fR.  The returned value has a reference count of zero.
-.SH "SEE ALSO"
-expr(n), info(n), Tcl_CreateObjCommand(3), Tcl_Free(3), Tcl_NewListObj(3)
-.SH KEYWORDS
-expression, mathematical function

doc/CrtObjCmd.3

@@ -8,7 +8,7 @@
 .so man.macros
 .BS
 .SH NAME
-Tcl_CreateObjCommand, Tcl_DeleteCommand, Tcl_DeleteCommandFromToken, Tcl_GetCommandInfo, Tcl_GetCommandInfoFromToken, Tcl_SetCommandInfo, Tcl_SetCommandInfoFromToken, Tcl_GetCommandName, Tcl_GetCommandFullName, Tcl_GetCommandFromObj \- implement new commands in C
+Tcl_CreateObjCommand, Tcl_DeleteCommand, Tcl_DeleteCommandFromToken, Tcl_GetCommandInfo, Tcl_GetCommandInfoFromToken, Tcl_SetCommandInfo, Tcl_SetCommandInfoFromToken, Tcl_GetCommandName, Tcl_GetCommandFullName, Tcl_GetCommandFromObj Tcl_RegisterCommandTypeName, Tcl_GetCommandTypeName \- implement new commands in C
 .SH SYNOPSIS
 .nf
 \fB#include <tcl.h>\fR
@@ -42,6 +42,14 @@ void
 .sp
 Tcl_Command
 \fBTcl_GetCommandFromObj\fR(\fIinterp, objPtr\fR)
+.sp
+.VS "info cmdtype feature"
+void
+\fBTcl_RegisterCommandTypeName\fR(\fIproc, typeName\fR)
+.sp
+const char *
+\fBTcl_GetCommandTypeName\fR(\fItoken\fR)
+.VE "info cmdtype feature"
 .SH ARGUMENTS
 .AS Tcl_CmdDeleteProc *deleteProc in/out
 .AP Tcl_Interp *interp in
@@ -51,7 +59,7 @@ Name of command.
 .AP Tcl_ObjCmdProc *proc in
 Implementation of the new command: \fIproc\fR will be called whenever
 \fIcmdName\fR is invoked as a command.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to \fIproc\fR and \fIdeleteProc\fR.
 .AP Tcl_CmdDeleteProc *deleteProc in
 Procedure to call before \fIcmdName\fR is deleted from the interpreter;
@@ -65,6 +73,9 @@ Pointer to structure containing various information about a
 Tcl command.
 .AP Tcl_Obj *objPtr in
 Value containing the name of a Tcl command.
+.AP "const char" *typeName in
+Indicates the name of the type of command implementation associated
+with a particular \fIproc\fR, or NULL to break the association.
 .BE
 .SH DESCRIPTION
 .PP
@@ -91,7 +102,7 @@ and it returns NULL.
 .PP
 .CS
 typedef int \fBTcl_ObjCmdProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Interp *\fIinterp\fR,
         int \fIobjc\fR,
         Tcl_Obj *const \fIobjv\fR[]);
@@ -164,7 +175,7 @@ result that match the type \fBTcl_CmdDeleteProc\fR:
 .PP
 .CS
 typedef void \fBTcl_CmdDeleteProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 The \fIclientData\fR argument will be the same as the \fIclientData\fR
@@ -206,11 +217,11 @@ A \fBTcl_CmdInfo\fR structure has the following fields:
 typedef struct Tcl_CmdInfo {
     int \fIisNativeObjectProc\fR;
     Tcl_ObjCmdProc *\fIobjProc\fR;
-    ClientData \fIobjClientData\fR;
+    void *\fIobjClientData\fR;
     Tcl_CmdProc *\fIproc\fR;
-    ClientData \fIclientData\fR;
+    void *\fIclientData\fR;
     Tcl_CmdDeleteProc *\fIdeleteProc\fR;
-    ClientData \fIdeleteData\fR;
+    void *\fIdeleteData\fR;
     Tcl_Namespace *\fInamespacePtr\fR;
 } \fBTcl_CmdInfo\fR;
 .CE
@@ -236,7 +247,7 @@ otherwise, this is a compatibility procedure
 registered by \fBTcl_CreateObjCommand\fR
 that simply calls the command's
 value-based procedure after converting its string arguments to Tcl values.
-The field \fIdeleteData\fR is the ClientData value
+The field \fIdeleteData\fR is the clientData value
 to pass to \fIdeleteProc\fR;  it is normally the same as
 \fIclientData\fR but may be set independently using the
 \fBTcl_SetCommandInfo\fR procedure.
@@ -250,7 +261,7 @@ from \fBTcl_CreateObjCommand\fR in place of the command name.  If the
 and fills in the structure designated by \fIinfoPtr\fR.
 .PP
 \fBTcl_SetCommandInfo\fR is used to modify the procedures and
-ClientData values associated with a command.
+clientData values associated with a command.
 Its \fIcmdName\fR argument is the name of a command in \fIinterp\fR.
 \fIcmdName\fR may include \fB::\fR namespace qualifiers
 to identify a command in a particular namespace.
@@ -266,9 +277,9 @@ copies the information from \fI*infoPtr\fR to Tcl's internal structure
 for the command and returns 1.
 .PP
 Note that \fBTcl_SetCommandInfo\fR and
-\fBTcl_SetCommandInfoFromToken\fR both allow the ClientData for a
+\fBTcl_SetCommandInfoFromToken\fR both allow the clientData for a
 command's deletion procedure to be given a different value than the
-ClientData for its command procedure.
+clientData for its command procedure.
 .PP
 Note that neither \fBTcl_SetCommandInfo\fR nor
 \fBTcl_SetCommandInfoFromToken\fR will change a command's namespace.
@@ -296,6 +307,22 @@ is appended to the value specified by \fIobjPtr\fR.
 specified by the name in a \fBTcl_Obj\fR.
 The command name is resolved relative to the current namespace.
 Returns NULL if the command is not found.
+.PP
+.VS "info cmdtype feature"
+\fBTcl_RegisterCommandTypeName\fR is used to associate a name (the
+\fItypeName\fR argument) with a particular implementation function so that it
+can then be looked up with \fBTcl_GetCommandTypeName\fR, which in turn is
+called with a command token that information is wanted for and which returns
+the name of the type that was registered for the implementation function used
+for that command. (The lookup functionality is surfaced virtually directly in Tcl via
+\fBinfo cmdtype\fR.) If there is no function registered for a particular
+function, the result will be the string literal
+.QW \fBnative\fR .
+The registration of a name can be undone by registering a mapping to NULL
+instead. The result from \fBTcl_GetCommandTypeName\fR will be exactly that
+string which was registered, and not a copy; use of a compile-time constant
+string is \fIstrongly recommended\fR.
+.VE "info cmdtype feature"
 .SH "SEE ALSO"
 Tcl_CreateCommand(3), Tcl_ResetResult(3), Tcl_SetObjResult(3)
 .SH KEYWORDS

doc/CrtTimerHdlr.3

@@ -24,7 +24,7 @@ Tcl_TimerToken
 How many milliseconds to wait before invoking \fIproc\fR.
 .AP Tcl_TimerProc *proc in
 Procedure to invoke after \fImilliseconds\fR have elapsed.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to \fIproc\fR.
 .AP Tcl_TimerToken token in
 Token for previously created timer handler (the return value
@@ -51,7 +51,7 @@ the type \fBTcl_TimerProc\fR:
 .PP
 .CS
 typedef void \fBTcl_TimerProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 The \fIclientData\fR parameter to \fIproc\fR is a

doc/CrtTrace.3

@@ -41,7 +41,7 @@ details of the calling sequence.
 .AP Tcl_CmdTraceProc *proc in
 Procedure to call for each command that is executed.  See below for
 details on the calling sequence.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to \fIobjProc\fR or \fIproc\fR.
 .AP Tcl_CmdObjTraceDeleteProc *deleteProc in
 Procedure to call when the trace is deleted.  See below for details of
@@ -66,7 +66,7 @@ interpreter.
 .PP
 .CS
 typedef int \fBTcl_CmdObjTraceProc\fR(
-        \fBClientData\fR \fIclientData\fR,
+        \fBvoid *\fR \fIclientData\fR,
         \fBTcl_Interp\fR* \fIinterp\fR,
         int \fIlevel\fR,
         const char *\fIcommand\fR,
@@ -77,7 +77,7 @@ typedef int \fBTcl_CmdObjTraceProc\fR(
 .PP
 The \fIclientData\fR and \fIinterp\fR parameters are copies of the
 corresponding arguments given to \fBTcl_CreateTrace\fR.
-\fIClientData\fR typically points to an application-specific data
+\fIclientData\fR typically points to an application-specific data
 structure that describes what to do when \fIobjProc\fR is invoked.  The
 \fIlevel\fR parameter gives the nesting level of the command (1 for
 top-level commands passed to \fBTcl_Eval\fR by the application, 2 for
@@ -144,7 +144,7 @@ When \fBTcl_DeleteTrace\fR is called, the interpreter invokes the
 .PP
 .CS
 typedef void \fBTcl_CmdObjTraceDeleteProc\fR(
-        \fBClientData\fR \fIclientData\fR);
+        \fBvoid *\fR \fIclientData\fR);
 .CE
 .PP
 The \fIclientData\fR parameter will be the same as the
@@ -160,12 +160,12 @@ match the type \fBTcl_CmdTraceProc\fR:
 .PP
 .CS
 typedef void \fBTcl_CmdTraceProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Interp *\fIinterp\fR,
         int \fIlevel\fR,
         char *\fIcommand\fR,
         Tcl_CmdProc *\fIcmdProc\fR,
-        ClientData \fIcmdClientData\fR,
+        void *\fIcmdClientData\fR,
         int \fIargc\fR,
         const char *\fIargv\fR[]);
 .CE

doc/DString.3

@@ -9,7 +9,7 @@
 .so man.macros
 .BS
 .SH NAME
-Tcl_DStringInit, Tcl_DStringAppend, Tcl_DStringAppendElement, Tcl_DStringStartSublist, Tcl_DStringEndSublist, Tcl_DStringLength, Tcl_DStringValue, Tcl_DStringSetLength, Tcl_DStringTrunc, Tcl_DStringFree, Tcl_DStringResult, Tcl_DStringGetResult \- manipulate dynamic strings
+Tcl_DStringInit, Tcl_DStringAppend, Tcl_DStringAppendElement, Tcl_DStringStartSublist, Tcl_DStringEndSublist, Tcl_DStringLength, Tcl_DStringValue, Tcl_DStringSetLength, Tcl_DStringFree, Tcl_DStringResult, Tcl_DStringGetResult \- manipulate dynamic strings
 .SH SYNOPSIS
 .nf
 \fB#include <tcl.h>\fR
@@ -26,7 +26,7 @@ char *
 .sp
 \fBTcl_DStringEndSublist\fR(\fIdsPtr\fR)
 .sp
-int
+size_t
 \fBTcl_DStringLength\fR(\fIdsPtr\fR)
 .sp
 char *
@@ -34,8 +34,6 @@ char *
 .sp
 \fBTcl_DStringSetLength\fR(\fIdsPtr, newLength\fR)
 .sp
-\fBTcl_DStringTrunc\fR(\fIdsPtr, newLength\fR)
-.sp
 \fBTcl_DStringFree\fR(\fIdsPtr\fR)
 .sp
 \fBTcl_DStringResult\fR(\fIinterp, dsPtr\fR)
@@ -49,10 +47,10 @@ Pointer to structure that is used to manage a dynamic string.
 Pointer to characters to append to dynamic string.
 .AP "const char" *element in
 Pointer to characters to append as list element to dynamic string.
-.AP int length in
-Number of bytes from \fIbytes\fR to add to dynamic string.  If -1,
+.AP size_t length in
+Number of bytes from \fIbytes\fR to add to dynamic string.  If (size_t)-1,
 add all characters up to null terminating character.
-.AP int newLength in
+.AP size_t newLength in
 New length for dynamic string, not including null terminating
 character.
 .AP Tcl_Interp *interp in/out
@@ -128,10 +126,6 @@ caller to fill in the new space.
 even if the string is truncated to zero length, so \fBTcl_DStringFree\fR
 will still need to be called.
 .PP
-\fBTcl_DStringTrunc\fR changes the length of a dynamic string.
-This procedure is now deprecated.  \fBTcl_DStringSetLength\fR  should
-be used instead.
-.PP
 \fBTcl_DStringFree\fR should be called when you are finished using
 the string.  It frees up any memory that was allocated for the string
 and reinitializes the string's value to an empty string.

doc/DoWhenIdle.3

@@ -21,7 +21,7 @@ Tcl_DoWhenIdle, Tcl_CancelIdleCall \- invoke a procedure when there are no pendi
 .AS Tcl_IdleProc clientData
 .AP Tcl_IdleProc *proc in
 Procedure to invoke.
-.AP ClientData clientData in
+.AP coid *clientData in
 Arbitrary one-word value to pass to \fIproc\fR.
 .BE
 .SH DESCRIPTION
@@ -43,7 +43,7 @@ type \fBTcl_IdleProc\fR:
 .PP
 .CS
 typedef void \fBTcl_IdleProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 The \fIclientData\fR parameter to \fIproc\fR is a copy of the \fIclientData\fR

doc/DumpActiveMemory.3

@@ -43,7 +43,7 @@ is not defined, these functions are all no-ops.
 \fBTcl_DumpActiveMemory\fR will output a list of all currently
 allocated memory to the specified file.  The information output for
 each allocated block of memory is:  starting and ending addresses
-(excluding guard zone), size, source file where \fBckalloc\fR was
+(excluding guard zone), size, source file where \fBTcl_Alloc\fR was
 called to allocate the block and line number in that file.  It is
 especially useful to call \fBTcl_DumpActiveMemory\fR after the Tcl
 interpreter has been deleted.
@@ -55,8 +55,8 @@ by \fBTcl_Main\fR.
 \fBTcl_ValidateAllMemory\fR forces a validation of the guard zones of
 all currently allocated blocks of memory.  Normally validation of a
 block occurs when its freed, unless full validation is enabled, in
-which case validation of all blocks occurs when \fBckalloc\fR and
-\fBckfree\fR are called.  This function forces the validation to occur
+which case validation of all blocks occurs when \fBTcl_Alloc\fR and
+\fBTcl_Free\fR are called.  This function forces the validation to occur
 at any point.
 
 .SH "SEE ALSO"

doc/Encoding.3

@@ -8,7 +8,7 @@
 .so man.macros
 .BS
 .SH NAME
-Tcl_GetEncoding, Tcl_FreeEncoding, Tcl_GetEncodingFromObj, Tcl_ExternalToUtfDString, Tcl_ExternalToUtf, Tcl_UtfToExternalDString, Tcl_UtfToExternal, Tcl_WinTCharToUtf, Tcl_WinUtfToTChar, Tcl_GetEncodingName, Tcl_SetSystemEncoding, Tcl_GetEncodingNameFromEnvironment, Tcl_GetEncodingNames, Tcl_CreateEncoding, Tcl_GetEncodingSearchPath, Tcl_SetEncodingSearchPath, Tcl_GetDefaultEncodingDir, Tcl_SetDefaultEncodingDir \- procedures for creating and using encodings
+Tcl_GetEncoding, Tcl_FreeEncoding, Tcl_GetEncodingFromObj, Tcl_ExternalToUtfDString, Tcl_ExternalToUtf, Tcl_UtfToExternalDString, Tcl_UtfToExternal, Tcl_WinTCharToUtf, Tcl_WinUtfToTChar, Tcl_GetEncodingName, Tcl_SetSystemEncoding, Tcl_GetEncodingNameFromEnvironment, Tcl_GetEncodingNames, Tcl_CreateEncoding, Tcl_GetEncodingSearchPath, Tcl_SetEncodingSearchPath \- procedures for creating and using encodings
 .SH SYNOPSIS
 .nf
 \fB#include <tcl.h>\fR
@@ -62,12 +62,6 @@ Tcl_Obj *
 .sp
 int
 \fBTcl_SetEncodingSearchPath\fR(\fIsearchPath\fR)
-.sp
-const char *
-\fBTcl_GetDefaultEncodingDir\fR(\fIvoid\fR)
-.sp
-void
-\fBTcl_SetDefaultEncodingDir\fR(\fIpath\fR)
 .SH ARGUMENTS
 .AS "const Tcl_EncodingType" *dstWrotePtr in/out
 .AP Tcl_Interp *interp in
@@ -89,7 +83,7 @@ specified encoding that are to be converted to UTF-8.  For the
 UTF-8 characters to be converted to the specified encoding.
 .AP "const TCHAR" *tsrc in
 An array of Windows TCHAR characters to convert to UTF-8.
-.AP int srcLen in
+.AP size_t srcLen in
 Length of \fIsrc\fR or \fItsrc\fR in bytes.  If the length is negative, the
 encoding-specific length of the string is used.
 .AP Tcl_DString *dstPtr out
@@ -287,7 +281,7 @@ the encoding name to it.  The \fBTcl_DStringValue\fR is returned.
 \fBTcl_GetEncodingNames\fR sets the \fIinterp\fR result to a list
 consisting of the names of all the encodings that are currently defined
 or can be dynamically loaded, searching the encoding path specified by
-\fBTcl_SetDefaultEncodingDir\fR.  This procedure does not ensure that the
+\fBTcl_SetEncodingSearchPath\fR.  This procedure does not ensure that the
 dynamically-loadable encoding files contain valid data, but merely that they
 exist.
 .PP
@@ -314,7 +308,7 @@ typedef struct Tcl_EncodingType {
     Tcl_EncodingConvertProc *\fItoUtfProc\fR;
     Tcl_EncodingConvertProc *\fIfromUtfProc\fR;
     Tcl_EncodingFreeProc *\fIfreeProc\fR;
-    ClientData \fIclientData\fR;
+    void *\fIclientData\fR;
     int \fInullSize\fR;
 } \fBTcl_EncodingType\fR;
 .CE
@@ -345,7 +339,7 @@ type \fBTcl_EncodingConvertProc\fR:
 .PP
 .CS
 typedef int \fBTcl_EncodingConvertProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         const char *\fIsrc\fR,
         int \fIsrcLen\fR,
         int \fIflags\fR,
@@ -377,7 +371,7 @@ The callback procedure \fIfreeProc\fR, if non-NULL, should match the type
 .PP
 .CS
 typedef void \fBTcl_EncodingFreeProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 This \fIfreeProc\fR function is called when the encoding is deleted.  The
@@ -402,15 +396,6 @@ are not verified as existing readable filesystem directories.  When
 searching for encoding data files takes place, and non-existent or
 non-readable filesystem directories on the \fIsearchPath\fR are silently
 ignored.
-.PP
-\fBTcl_GetDefaultEncodingDir\fR and \fBTcl_SetDefaultEncodingDir\fR
-are obsolete interfaces best replaced with calls to
-\fBTcl_GetEncodingSearchPath\fR and \fBTcl_SetEncodingSearchPath\fR.
-They are called to access and set the first element of the \fIsearchPath\fR
-list.  Since Tcl searches \fIsearchPath\fR for encoding data files in
-list order, these routines establish the
-.QW default
-directory in which to find encoding data files.
 .SH "ENCODING FILES"
 Space would prohibit precompiling into Tcl every possible encoding
 algorithm, so many encodings are stored on disk as dynamically-loadable

doc/Eval.3

@@ -10,7 +10,7 @@
 .so man.macros
 .BS
 .SH NAME
-Tcl_EvalObjEx, Tcl_EvalFile, Tcl_EvalObjv, Tcl_Eval, Tcl_EvalEx, Tcl_GlobalEval, Tcl_GlobalEvalObj, Tcl_VarEval, Tcl_VarEvalVA \- execute Tcl scripts
+Tcl_EvalObjEx, Tcl_EvalFile, Tcl_EvalObjv, Tcl_Eval, Tcl_EvalEx, Tcl_GlobalEval, Tcl_GlobalEvalObj, Tcl_VarEval \- execute Tcl scripts
 .SH SYNOPSIS
 .nf
 \fB#include <tcl.h>\fR
@@ -38,9 +38,6 @@ int
 .sp
 int
 \fBTcl_VarEval\fR(\fIinterp, part, part, ... \fB(char *) NULL\fR)
-.sp
-int
-\fBTcl_VarEvalVA\fR(\fIinterp, argList\fR)
 .SH ARGUMENTS
 .AS Tcl_Interp **termPtr
 .AP Tcl_Interp *interp in
@@ -67,9 +64,6 @@ first null byte are used.
 Points to first byte of script to execute (null-terminated and UTF-8).
 .AP char *part in
 String forming part of a Tcl script.
-.AP va_list argList in
-An argument list which must have been initialized using
-\fBva_start\fR, and cleared using \fBva_end\fR.
 .BE
 
 .SH DESCRIPTION
@@ -128,16 +122,10 @@ might be a UTF-8 special code.  The string is parsed and executed directly
 bytecodes.  In situations where it is known that the script will never be
 executed again, \fBTcl_Eval\fR may be faster than \fBTcl_EvalObjEx\fR.
  \fBTcl_Eval\fR returns a completion code and result just like
-\fBTcl_EvalObjEx\fR.  Note: for backward compatibility with versions before
-Tcl 8.0, \fBTcl_Eval\fR copies the value result in \fIinterp\fR to
-\fIinterp->result\fR (use is deprecated) where it can be accessed directly.
- This makes \fBTcl_Eval\fR somewhat slower than \fBTcl_EvalEx\fR, which
-does not do the copy.
+\fBTcl_EvalObjEx\fR.
 .PP
 \fBTcl_EvalEx\fR is an extended version of \fBTcl_Eval\fR that takes
-additional arguments \fInumBytes\fR and \fIflags\fR.  For the
-efficiency reason given above, \fBTcl_EvalEx\fR is generally preferred
-over \fBTcl_Eval\fR.
+additional arguments \fInumBytes\fR and \fIflags\fR.
 .PP
 \fBTcl_GlobalEval\fR and \fBTcl_GlobalEvalObj\fR are older procedures
 that are now deprecated.  They are similar to \fBTcl_EvalEx\fR and
@@ -153,10 +141,6 @@ It returns the result of the command and also modifies
 \fIinterp->result\fR in the same way as \fBTcl_Eval\fR.
 The last argument to \fBTcl_VarEval\fR must be NULL to indicate the end
 of arguments.  \fBTcl_VarEval\fR is now deprecated.
-.PP
-\fBTcl_VarEvalVA\fR is the same as \fBTcl_VarEval\fR except that
-instead of taking a variable number of arguments it takes an argument
-list. Like \fBTcl_VarEval\fR, \fBTcl_VarEvalVA\fR is deprecated.
 
 .SH "FLAG BITS"
 .PP

doc/Exit.3

@@ -42,7 +42,7 @@ usually means that an error occurred.
 Procedure to invoke before exiting application, or (for
 \fBTcl_SetExitProc\fR) NULL to uninstall the current application exit
 procedure.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to \fIproc\fR.
 .BE
 
@@ -64,7 +64,7 @@ otherwise causes the application to terminate without calling
 returns control to its caller.
 If an application exit handler has been installed (see
 \fBTcl_SetExitProc\fR), that handler is invoked with an argument
-consisting of the exit status (cast to ClientData); the application
+consisting of the exit status (cast to void *); the application
 exit handler should not return control to Tcl.
 .PP
 \fBTcl_Finalize\fR is similar to \fBTcl_Exit\fR except that it does not
@@ -93,7 +93,7 @@ and freeing global memory.
 .PP
 .CS
 typedef void \fBTcl_ExitProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 The \fIclientData\fR parameter to \fIproc\fR is a
@@ -133,7 +133,7 @@ installed, that exit handler takes over complete responsibility for
 finalization of Tcl's subsystems via \fBTcl_Finalize\fR at an
 appropriate time.  The argument passed to \fIproc\fR when it is
 invoked will be the exit status code (as passed to \fBTcl_Exit\fR)
-cast to a ClientData value.
+cast to a void *value.
 .SH "SEE ALSO"
 exit(n)
 .SH KEYWORDS

doc/FileSystem.3

@@ -20,7 +20,7 @@ int
 int
 \fBTcl_FSUnregister\fR(\fIfsPtr\fR)
 .sp
-ClientData
+void *
 \fBTcl_FSData\fR(\fIfsPtr\fR)
 .sp
 void
@@ -125,7 +125,7 @@ Tcl_Obj *
 int
 \fBTcl_FSConvertToPathType\fR(\fIinterp, pathPtr\fR)
 .sp
-ClientData
+void *
 \fBTcl_FSGetInternalRep\fR(\fIpathPtr, fsPtr\fR)
 .sp
 Tcl_Obj *
@@ -212,7 +212,7 @@ this structure will be returned. This parameter may be NULL.
 .AP Tcl_Interp *interp in
 Interpreter to use either for results, evaluation, or reporting error
 messages.
-.AP ClientData clientData in
+.AP void *clientData in
 The native description of the path value to create.
 .AP Tcl_Obj *firstPtr in
 The first of two path values to compare. The value may be converted
@@ -249,7 +249,7 @@ Name of a procedure to look up in the file's symbol table
 Filled with the init function for this code.
 .AP Tcl_PackageInitProc **proc2Ptr out
 Filled with the safe-init function for this code.
-.AP ClientData *clientDataPtr out
+.AP void **clientDataPtr out
 Filled with the clientData value to pass to this code's unload
 function when it is called.
 .AP Tcl_LoadHandle *loadHandlePtr out
@@ -724,7 +724,7 @@ better functions to use for most purposes.
 \fBTcl_FSGetTranslatedStringPath\fR does the same as
 \fBTcl_FSGetTranslatedPath\fR, but returns a character string or NULL.
 The string returned is dynamically allocated and owned by the caller,
-which must store it or call \fBckfree\fR to ensure it is freed. Again,
+which must store it or call \fBTcl_Free\fR to ensure it is freed. Again,
 \fBTcl_FSGetNormalizedPath\fR or \fBTcl_FSGetNativePath\fR are usually
 better functions to use for most purposes.
 .PP
@@ -791,7 +791,7 @@ It returns one of \fBTCL_PATH_ABSOLUTE\fR, \fBTCL_PATH_RELATIVE\fR, or
 .SS "PORTABLE STAT RESULT API"
 .PP
 \fBTcl_AllocStatBuf\fR allocates a \fITcl_StatBuf\fR on the system heap (which
-may be deallocated by being passed to \fBckfree\fR). This allows extensions to
+may be deallocated by being passed to \fBTcl_Free\fR). This allows extensions to
 invoke \fBTcl_FSStat\fR and \fBTcl_FSLstat\fR without being dependent on the
 size of the buffer. That in turn depends on the flags used to build Tcl.
 .PP
@@ -841,7 +841,7 @@ general that is not a good thing to do). \fBTCL_OK\fR will be returned.
 the list of known filesystems, if it is known, and returns \fBTCL_OK\fR. If
 the filesystem is not currently registered, \fBTCL_ERROR\fR is returned.
 .PP
-\fBTcl_FSData\fR will return the ClientData associated with the given
+\fBTcl_FSData\fR will return the clientData associated with the given
 filesystem, if that filesystem is registered. Otherwise it will
 return NULL.
 .PP
@@ -1018,7 +1018,7 @@ Tcl's internal list of known filesystems.
 .CS
 typedef int \fBTcl_FSPathInFilesystemProc\fR(
         Tcl_Obj *\fIpathPtr\fR,
-        ClientData *\fIclientDataPtr\fR);
+        void **\fIclientDataPtr\fR);
 .CE
 .SS DUPINTERNALREPPROC
 .PP
@@ -1028,8 +1028,8 @@ simply not copy the internal representation, which may then need to be
 regenerated later.
 .PP
 .CS
-typedef ClientData \fBTcl_FSDupInternalRepProc\fR(
-        ClientData \fIclientData\fR);
+typedef void *\fBTcl_FSDupInternalRepProc\fR(
+        void *\fIclientData\fR);
 .CE
 .SS FREEINTERNALREPPROC
 Free the internal representation. This must be implemented if internal
@@ -1038,7 +1038,7 @@ internal representation is generated), but may otherwise be NULL.
 .PP
 .CS
 typedef void \fBTcl_FSFreeInternalRepProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .SS INTERNALTONORMALIZEDPROC
 .PP
@@ -1049,7 +1049,7 @@ representation is the normalized path.
 .PP
 .CS
 typedef Tcl_Obj *\fBTcl_FSInternalToNormalizedProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .SS CREATEINTERNALREPPROC
 .PP
@@ -1060,7 +1060,7 @@ the \fITcl_FSPathInFilesystemProc\fR for this filesystem always
 immediately creates an internal representation for paths it accepts.
 .PP
 .CS
-typedef ClientData \fBTcl_FSCreateInternalRepProc\fR(
+typedef void *\fBTcl_FSCreateInternalRepProc\fR(
         Tcl_Obj *\fIpathPtr\fR);
 .CE
 .SS NORMALIZEPATHPROC

doc/GetInt.3

@@ -64,12 +64,9 @@ if the first such characters are
 then \fIsrc\fR is expected to be in octal form;  otherwise,
 if the first such characters are
 .QW \fB0b\fR
-then \fIsrc\fR is expected to be in binary form;  otherwise,
-if the first such character is
-.QW \fB0\fR
 then \fIsrc\fR
-is expected to be in octal form;  otherwise, \fIsrc\fR
-is expected to be in decimal form.
+is expected to be in binary form;  otherwise, \fIsrc\fR is
+expected to be in decimal form.
 .PP
 \fBTcl_GetDouble\fR expects \fIsrc\fR to consist of a floating-point
 number, which is:  white space;  a sign; a sequence of digits;  a

doc/GetOpnFl.3

@@ -28,7 +28,7 @@ be used for reading.
 .AP int checkUsage in
 If non-zero, then an error will be generated if the file was not opened
 for the access indicated by \fIwrite\fR.
-.AP ClientData *filePtr out
+.AP void **filePtr out
 Points to word in which to store pointer to FILE structure for
 the file given by \fIchanID\fR.
 .BE

doc/GetTime.3

@@ -27,13 +27,13 @@ Pointer to handler function replacing \fBTcl_GetTime\fR's access to the OS.
 .AP Tcl_ScaleTimeProc scaleProc in
 Pointer to handler function for the conversion of time delays in the
 virtual domain to real-time.
-.AP ClientData clientData in
+.AP void *clientData in
 Value passed through to the two handler functions.
 .AP Tcl_GetTimeProc *getProcPtr out
 Pointer to place the currently registered get handler function into.
 .AP Tcl_ScaleTimeProc *scaleProcPtr out
 Pointer to place the currently registered scale handler function into.
-.AP ClientData *clientDataPtr out
+.AP void **clientDataPtr out
 Pointer to place the currently registered pass-through value into.
 .BE
 .SH DESCRIPTION
@@ -83,10 +83,10 @@ The signatures of the handler functions are as follows:
 .CS
 typedef void \fBTcl_GetTimeProc\fR(
         Tcl_Time *\fItimebuf\fR,
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 typedef void \fBTcl_ScaleTimeProc\fR(
         Tcl_Time *\fItimebuf\fR,
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 The \fItimebuf\fR fields contain the time to manipulate, and the

doc/Hash.3

@@ -30,7 +30,7 @@ Tcl_HashEntry *
 Tcl_HashEntry *
 \fBTcl_FindHashEntry\fR(\fItablePtr, key\fR)
 .sp
-ClientData
+void *
 \fBTcl_GetHashValue\fR(\fIentryPtr\fR)
 .sp
 \fBTcl_SetHashValue\fR(\fIentryPtr, value\fR)
@@ -66,9 +66,8 @@ The word at \fI*newPtr\fR is set to 1 if a new entry was created
 and 0 if there was already an entry for \fIkey\fR.
 .AP Tcl_HashEntry *entryPtr in
 Pointer to hash table entry.
-.AP ClientData value in
-New value to assign to hash table entry.  Need not have type
-ClientData, but must fit in same space as ClientData.
+.AP void *value in
+New value to assign to hash table entry.
 .AP Tcl_HashSearch *searchPtr in
 Pointer to record to use to keep track of progress in enumerating
 all the entries in a hash table.
@@ -186,11 +185,6 @@ instead, it returns NULL as result.
 .PP
 \fBTcl_GetHashValue\fR and \fBTcl_SetHashValue\fR are used to
 read and write an entry's value, respectively.
-Values are stored and retrieved as type
-.QW ClientData ,
-which is
-large enough to hold a pointer value.  On almost all machines this is
-large enough to hold an integer value too.
 .PP
 \fBTcl_GetHashKey\fR returns the key for a given hash table entry,
 either as a pointer to a string, a one-word
@@ -229,7 +223,7 @@ overall information about a hash table, such as the number of
 entries it contains, the number of buckets in its hash array,
 and the utilization of the buckets.
 It is the caller's responsibility to free the result string
-by passing it to \fBckfree\fR.
+by passing it to \fBTcl_Free\fR.
 .PP
 The header file \fBtcl.h\fR defines the actual data structures
 used to implement hash tables.

doc/InitStubs.3

@@ -63,9 +63,9 @@ Define the \fBUSE_TCL_STUBS\fR symbol.  Typically, you would include the
 \fB\-DUSE_TCL_STUBS\fR flag when compiling the extension.
 .IP 3) 5
 Link the extension with the Tcl stubs library instead of the standard
-Tcl library.  For example, to use the Tcl 8.6 ABI on Unix platforms,
-the library name is \fIlibtclstub8.6.a\fR; on Windows platforms, the
-library name is \fItclstub86.lib\fR.
+Tcl library.  For example, to use the Tcl 9.0 ABI on Unix platforms,
+the library name is \fIlibtclstub9.0.a\fR; on Windows platforms, the
+library name is \fItclstub90.lib\fR.
 .PP
 If the extension also requires the Tk API, it must also call
 \fBTk_InitStubs\fR to initialize the Tk stubs interface and link

doc/Interp.3

@@ -33,19 +33,6 @@ the pointer as described below is no longer supported.  The supported
 public routines \fBTcl_SetResult\fR, \fBTcl_GetResult\fR,
 \fBTcl_SetErrorLine\fR, \fBTcl_GetErrorLine\fR must be used instead.
 .PP
-For legacy programs and extensions no longer being maintained, compiles
-against the Tcl 8.6 header files are only possible with the compiler
-directives
-.CS
-#define USE_INTERP_RESULT
-.CE
-and/or
-.CS
-#define USE_INTERP_ERRORLINE
-.CE
-depending on which fields of the \fBTcl_Interp\fR struct are accessed.
-These directives may be embedded in code or supplied via compiler options.
-.PP
 The \fIresult\fR and \fIfreeProc\fR fields are used to return
 results or error messages from commands.
 This information is returned by command procedures back to \fBTcl_Eval\fR,

doc/Limit.3

@@ -83,7 +83,7 @@ the handler returns.  Many handlers may be attached to the same
 interpreter limit; their order of execution is not defined, and they
 must be identified by \fIhandlerProc\fR and \fIclientData\fR when they
 are deleted.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary pointer-sized word used to pass some context to the
 \fIhandlerProc\fR function.
 .AP Tcl_LimitHandlerDeleteProc *deleteProc in
@@ -162,7 +162,7 @@ following prototype:
 .PP
 .CS
 typedef void \fBTcl_LimitHandlerProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Interp *\fIinterp\fR);
 .CE
 .PP
@@ -179,7 +179,7 @@ following prototype:
 .PP
 .CS
 typedef void \fBTcl_LimitHandlerDeleteProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 A limit handler may be deleted using \fBTcl_LimitRemoveHandler\fR; the

doc/LinkVar.3

@@ -190,7 +190,7 @@ Tcl errors.
 \fBTCL_LINK_STRING\fR
 The C variable is of type \fBchar *\fR.
 If its value is not NULL then it must be a pointer to a string
-allocated with \fBTcl_Alloc\fR or \fBckalloc\fR.
+allocated with \fBTcl_Alloc\fR.
 Whenever the Tcl variable is modified the current C string will be
 freed and new memory will be allocated to hold a copy of the variable's
 new value.

doc/Method.3

@@ -61,7 +61,7 @@ Tcl_Object
 int
 \fBTcl_ObjectContextSkippedArgs\fR(\fIcontext\fR)
 .SH ARGUMENTS
-.AS ClientData clientData in
+.AS void *clientData in
 .AP Tcl_Interp *interp in/out
 The interpreter holding the object or class to create or update a method in.
 .AP Tcl_Object object in
@@ -83,10 +83,10 @@ and \fBTCL_OO_METHOD_PRIVATE\fR for a private method.
 .AP Tcl_MethodType *methodTypePtr in
 A description of the type of the method to create, or the type of method to
 compare against.
-.AP ClientData clientData in
+.AP void *clientData in
 A piece of data that is passed to the implementation of the method without
 interpretation.
-.AP ClientData *clientDataPtr out
+.AP void **clientDataPtr out
 A pointer to a variable in which to write the \fIclientData\fR value supplied
 when the method was created. If NULL, the \fIclientData\fR value will not be
 retrieved.
@@ -213,7 +213,7 @@ Functions matching this signature are called when the method is invoked.
 .PP
 .CS
 typedef int \fBTcl_MethodCallProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Interp *\fIinterp\fR,
         Tcl_ObjectContext \fIobjectContext\fR,
         int \fIobjc\fR,
@@ -234,7 +234,7 @@ through a new method being created or because the object or class is deleted.
 .PP
 .CS
 typedef void \fBTcl_MethodDeleteProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 The \fIclientData\fR argument to a Tcl_MethodDeleteProc will be the same as
@@ -248,8 +248,8 @@ class is copied using \fBTcl_CopyObjectInstance\fR (or \fBoo::copy\fR).
 .CS
 typedef int \fBTcl_CloneProc\fR(
         Tcl_Interp *\fIinterp\fR,
-        ClientData \fIoldClientData\fR,
-        ClientData *\fInewClientDataPtr\fR);
+        void *\fIoldClientData\fR,
+        void **\fInewClientDataPtr\fR);
 .CE
 .PP
 The \fIinterp\fR argument gives a place to write an error message when the

doc/NRE.3

@@ -49,7 +49,7 @@ in the same way as the \fIproc\fR argument to \fBTcl_CreateObjCommand\fR(3)
 (\fIq.v.\fR).
 .AP Tcl_ObjCmdProc *nreProc in
 Called instead of \fIproc\fR when a trampoline is already in use.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value passed to \fIproc\fR, \fInreProc\fR, \fIdeleteProc\fR
 and \fIobjProc\fR.
 .AP Tcl_CmdDeleteProc *deleteProc in/out
@@ -72,10 +72,10 @@ Pointer to an unshared Tcl_Obj where the result of the evaluation is stored if
 the return code is TCL_OK.
 .AP Tcl_NRPostProc *postProcPtr in
 A function to push.
-.AP ClientData data0 in
-.AP ClientData data1 in
-.AP ClientData data2 in
-.AP ClientData data3 in
+.AP void *data0 in
+.AP void *data1 in
+.AP void *data2 in
+.AP void *data3 in
 \fIdata0\fR through \fIdata3\fR are four one-word values that will be passed
 to the function designated by \fIpostProcPtr\fR when it is invoked.
 .BE
@@ -130,7 +130,7 @@ a message as the interpreter's result.
 .CS
 typedef int
 \fBTcl_NRPostProc\fR(
-        \fBClientData\fR \fIdata\fR[],
+        \fBvoid *\fR \fIdata\fR[],
         \fBTcl_Interp\fR *\fIinterp\fR,
         int \fIresult\fR);
 .CE
@@ -146,7 +146,7 @@ stack, to evalute a script:
 .CS
 int
 \fITheCmdOldObjProc\fR(
-    ClientData clientData,
+    void *clientData,
     Tcl_Interp *interp,
     int objc,
     Tcl_Obj *const objv[])
@@ -177,7 +177,7 @@ call \fITheCmdNRObjProc\fR:
 .CS
 int
 \fITheCmdOldObjProc\fR(
-    ClientData clientData,
+    void *clientData,
     Tcl_Interp *interp,
     int objc,
     Tcl_Obj *const objv[])
@@ -190,7 +190,7 @@ int
 .CS
 int
 \fITheCmdNRObjProc\fR
-    ClientData clientData,
+    void *clientData,
     Tcl_Interp *interp,
     int objc,
     Tcl_Obj *const objv[])
@@ -211,7 +211,7 @@ int
 .CS
 int
 \fITheCmdNRPostProc\fR(
-    ClientData data[],
+    void *data[],
     Tcl_Interp *interp,
     int result)
 {

doc/Namespace.3

@@ -57,7 +57,7 @@ The interpreter in which the namespace exists and where name lookups
 are performed. Also where error result messages are written.
 .AP "const char" *name in
 The name of the namespace or command to be created or accessed.
-.AP ClientData clientData in
+.AP void *clientData in
 A context pointer by the creator of the namespace.  Not interpreted by
 Tcl at all.
 .AP Tcl_NamespaceDeleteProc *deleteProc in
@@ -117,7 +117,7 @@ the global namespace.)
 .PP
 .CS
 typedef void \fBTcl_NamespaceDeleteProc\fR(
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 \fBTcl_DeleteNamespace\fR deletes a namespace, calling the

doc/Notifier.3

@@ -38,7 +38,7 @@ Tcl_ThreadId
 void
 \fBTcl_DeleteEvents\fR(\fIdeleteProc, clientData\fR)
 .sp
-ClientData
+void *
 \fBTcl_InitNotifier\fR()
 .sp
 void
@@ -78,7 +78,7 @@ Procedure to invoke to prepare for event wait in \fBTcl_DoOneEvent\fR.
 Procedure for \fBTcl_DoOneEvent\fR to invoke after waiting for
 events.  Checks to see if any events have occurred and, if so,
 queues them.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to \fIsetupProc\fR, \fIcheckProc\fR, or
 \fIdeleteProc\fR.
 .AP "const Tcl_Time" *timePtr in
@@ -89,7 +89,7 @@ is NULL, it means there is no maximum wait time:  wait forever if
 necessary.
 .AP Tcl_Event *evPtr in
 An event to add to the event queue.  The storage for the event must
-have been allocated by the caller using \fBTcl_Alloc\fR or \fBckalloc\fR.
+have been allocated by the caller using \fBTcl_Alloc\fR.
 .AP Tcl_QueuePosition position in
 Where to add the new event in the queue:  \fBTCL_QUEUE_TAIL\fR,
 \fBTCL_QUEUE_HEAD\fR, or \fBTCL_QUEUE_MARK\fR.
@@ -230,7 +230,7 @@ the event source.
 .PP
 .CS
 typedef void \fBTcl_EventSetupProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         int \fIflags\fR);
 .CE
 .PP
@@ -308,7 +308,7 @@ following prototype:
 .PP
 .CS
 typedef void \fBTcl_EventCheckProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         int \fIflags\fR);
 .CE
 .PP
@@ -399,7 +399,7 @@ of window events.
 When \fIproc\fR returns 1, \fBTcl_ServiceEvent\fR will remove the
 event from the event queue and free its storage.
 Note that the storage for an event must be allocated by
-the event source (using \fBTcl_Alloc\fR or the Tcl macro \fBckalloc\fR)
+the event source (using \fBTcl_Alloc\fR)
 before calling \fBTcl_QueueEvent\fR, but it
 will be freed by \fBTcl_ServiceEvent\fR, not by the event source.
 .PP
@@ -428,7 +428,7 @@ queue.  \fIProc\fR should match the following prototype:
 .CS
 typedef int \fBTcl_EventDeleteProc\fR(
         Tcl_Event *\fIevPtr\fR,
-        ClientData \fIclientData\fR);
+        void *\fIclientData\fR);
 .CE
 .PP
 The \fIclientData\fR argument will be the same as the \fIclientData\fR

doc/Object.3

@@ -111,9 +111,9 @@ which is defined as follows.
 .PP
 .CS
 typedef struct Tcl_Obj {
-    int \fIrefCount\fR;
+    size_t \fIrefCount\fR;
     char *\fIbytes\fR;
-    int \fIlength\fR;
+    size_t \fIlength\fR;
     const Tcl_ObjType *\fItypePtr\fR;
     union {
         long \fIlongValue\fR;

doc/ObjectType.3

@@ -186,8 +186,8 @@ to be treated as conventional null character-terminated C strings.
 These restrictions are easily met by using Tcl's internal UTF encoding
 for the string representation, same as one would do for other
 Tcl routines accepting string values as arguments.
-Storage for the byte array must be allocated in the heap by \fBTcl_Alloc\fR
-or \fBckalloc\fR.  Note that \fIupdateStringProc\fRs must allocate
+Storage for the byte array must be allocated in the heap by \fBTcl_Alloc\fR.
+Note that \fIupdateStringProc\fRs must allocate
 enough storage for the string's bytes and the terminating null byte.
 .PP
 The \fIupdateStringProc\fR for Tcl's built-in double type, for example,

doc/OpenFileChnl.3

@@ -53,28 +53,28 @@ int
 int
 \fBTcl_Read\fR(\fIchannel, readBuf, bytesToRead\fR)
 .sp
-int
+size_t
 \fBTcl_GetsObj\fR(\fIchannel, lineObjPtr\fR)
 .sp
-int
+size_t
 \fBTcl_Gets\fR(\fIchannel, lineRead\fR)
 .sp
-int
+size_t
 \fBTcl_Ungets\fR(\fIchannel, input, inputLen, addAtEnd\fR)
 .sp
-int
+size_t
 \fBTcl_WriteObj\fR(\fIchannel, writeObjPtr\fR)
 .sp
-int
+size_t
 \fBTcl_WriteChars\fR(\fIchannel, charBuf, bytesToWrite\fR)
 .sp
-int
+size_t
 \fBTcl_Write\fR(\fIchannel, byteBuf, bytesToWrite\fR)
 .sp
-int
+size_t
 \fBTcl_ReadRaw\fR(\fIchannel, readBuf, bytesToRead\fR)
 .sp
-int
+size_t
 \fBTcl_WriteRaw\fR(\fIchannel, byteBuf, bytesToWrite\fR)
 .sp
 int
@@ -134,7 +134,7 @@ input of the invoking process; likewise for \fBTCL_STDOUT\fR and
 redirect stdio handles to override the stdio handles for which
 \fBTCL_STDIN\fR, \fBTCL_STDOUT\fR and \fBTCL_STDERR\fR have been set.  If it
 is set, then such redirections cause an error.
-.AP ClientData handle in
+.AP void *handle in
 Operating system specific handle for I/O to a file. For Unix this is a
 file descriptor, for Windows it is a HANDLE.
 .AP int readOrWrite in
@@ -154,7 +154,7 @@ from a procedure such as \fBTcl_OpenFileChannel\fR.
 .AP Tcl_Obj *readObjPtr in/out
 A pointer to a Tcl value in which to store the characters read from the
 channel.
-.AP int charsToRead in
+.AP size_t charsToRead in
 The number of characters to read from the channel.  If the channel's encoding
 is \fBbinary\fR, this is equivalent to the number of bytes to read from the
 channel.
@@ -163,7 +163,7 @@ If non-zero, data read from the channel will be appended to the value.
 Otherwise, the data will replace the existing contents of the value.
 .AP char *readBuf out
 A buffer in which to store the bytes read from the channel.
-.AP int bytesToRead in
+.AP size_t bytesToRead in
 The number of bytes to read from the channel.  The buffer \fIreadBuf\fR must
 be large enough to hold this many bytes.
 .AP Tcl_Obj *lineObjPtr in/out
@@ -176,7 +176,7 @@ channel.  Must have been initialized by the caller.  The line read will be
 appended to any data already in the dynamic string.
 .AP "const char" *input in
 The input to add to a channel buffer.
-.AP int inputLen in
+.AP size_t inputLen in
 Length of the input
 .AP int addAtEnd in
 Flag indicating whether the input should be added to the end or
@@ -187,7 +187,7 @@ A pointer to a Tcl value whose contents will be output to the channel.
 A buffer containing the characters to output to the channel.
 .AP "const char" *byteBuf in
 A buffer containing the bytes to output to the channel.
-.AP int bytesToWrite in
+.AP size_t bytesToWrite in
 The number of bytes to consume from \fIcharBuf\fR or \fIbyteBuf\fR and
 output to the channel.
 .AP Tcl_WideInt offset in

doc/OpenTcp.3

@@ -50,12 +50,12 @@ If nonzero, the client socket is connected asynchronously to the server.
 .AP "unsigned int" flags in
 ORed combination of \fBTCL_TCPSERVER\fR flags that specify additional
 informations about the socket being created.
-.AP ClientData sock in
+.AP void *sock in
 Platform-specific handle for client TCP socket.
 .AP Tcl_TcpAcceptProc *proc in
 Pointer to a procedure to invoke each time a new connection is
 accepted via the socket.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to \fIproc\fR.
 .BE
 .SH DESCRIPTION
@@ -127,7 +127,7 @@ the channel. \fIProc\fR must match the following prototype:
 .PP
 .CS
 typedef void \fBTcl_TcpAcceptProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Channel \fIchannel\fR,
         char *\fIhostName\fR,
         int \fIport\fR);

doc/Panic.3

@@ -7,7 +7,7 @@
 .BS
 '\"  Note:  do not modify the .SH NAME line immediately below!
 .SH NAME
-Tcl_Panic, Tcl_PanicVA, Tcl_SetPanicProc, Tcl_ConsolePanic \- report fatal error and abort
+Tcl_Panic, Tcl_SetPanicProc, Tcl_ConsolePanic \- report fatal error and abort
 .SH SYNOPSIS
 .nf
 \fB#include <tcl.h>\fR
@@ -16,9 +16,6 @@ void
 \fBTcl_Panic\fR(\fIformat\fR, \fIarg\fR, \fIarg\fR, \fI...\fR)
 .sp
 void
-\fBTcl_PanicVA\fR(\fIformat\fR, \fIargList\fR)
-.sp
-void
 \fBTcl_SetPanicProc\fR(\fIpanicProc\fR)
 .sp
 void
@@ -91,9 +88,6 @@ the Tcl library, \fBTcl_Panic\fR is a public function and may be called
 by any extension or application that wishes to abort the process and
 have a panic message displayed the same way that panic messages from Tcl
 will be displayed.
-.PP
-\fBTcl_PanicVA\fR is the same as \fBTcl_Panic\fR except that instead of
-taking a variable number of arguments it takes an argument list.
 .SH "SEE ALSO"
 abort(3), printf(3), exec(n), format(n)
 .SH KEYWORDS

doc/ParseArgs.3

@@ -31,7 +31,7 @@ The array of arguments to be parsed.
 Pointer to a variable that will hold the array of unprocessed arguments.
 Should be NULL if no return of unprocessed arguments is required. If
 \fIobjcPtr\fR is updated to a non-zero value, the array returned through this
-must be deallocated using \fBckfree\fR.
+must be deallocated using \fBTcl_Free\fR.
 .BE
 .SH DESCRIPTION
 .PP
@@ -84,7 +84,7 @@ typedef struct {
     void *\fIsrcPtr\fR;
     void *\fIdstPtr\fR;
     const char *\fIhelpStr\fR;
-    ClientData \fIclientData\fR;
+    void *\fIclientData\fR;
 } \fBTcl_ArgvInfo\fR;
 .CE
 .PP
@@ -127,7 +127,7 @@ have the following signature:
 .PP
 .CS
 typedef int (\fBTcl_ArgvFuncProc\fR)(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Obj *\fIobjPtr\fR,
         void *\fIdstPtr\fR);
 .CE
@@ -149,7 +149,7 @@ function will have the following signature:
 .PP
 .CS
 typedef int (\fBTcl_ArgvGenFuncProc\fR)(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Interp *\fIinterp\fR,
         int \fIobjc\fR,
         Tcl_Obj *const *\fIobjv\fR,

doc/ParseCmd.3

@@ -8,7 +8,7 @@
 .so man.macros
 .BS
 .SH NAME
-Tcl_ParseCommand, Tcl_ParseExpr, Tcl_ParseBraces, Tcl_ParseQuotedString, Tcl_ParseVarName, Tcl_ParseVar, Tcl_FreeParse, Tcl_EvalTokens, Tcl_EvalTokensStandard \- parse Tcl scripts and expressions
+Tcl_ParseCommand, Tcl_ParseExpr, Tcl_ParseBraces, Tcl_ParseQuotedString, Tcl_ParseVarName, Tcl_ParseVar, Tcl_FreeParse, Tcl_EvalTokensStandard \- parse Tcl scripts and expressions
 .SH SYNOPSIS
 .nf
 \fB#include <tcl.h>\fR
@@ -33,20 +33,16 @@ const char *
 .sp
 \fBTcl_FreeParse\fR(\fIusedParsePtr\fR)
 .sp
-Tcl_Obj *
-\fBTcl_EvalTokens\fR(\fIinterp, tokenPtr, numTokens\fR)
-.sp
 int
 \fBTcl_EvalTokensStandard\fR(\fIinterp, tokenPtr, numTokens\fR)
 .SH ARGUMENTS
 .AS Tcl_Interp *usedParsePtr out
 .AP Tcl_Interp *interp out
-For procedures other than \fBTcl_FreeParse\fR, \fBTcl_EvalTokens\fR
-and \fBTcl_EvalTokensStandard\fR, used only for error reporting;
+For procedures other than \fBTcl_FreeParse\fR and
+\fBTcl_EvalTokensStandard\fR, used only for error reporting;
 if NULL, then no error messages are left after errors.
-For \fBTcl_EvalTokens\fR and \fBTcl_EvalTokensStandard\fR,
-determines the context for evaluating the
-script and also is used for error reporting; must not be NULL.
+For \fBTcl_EvalTokensStandard\fR, determines the context for evaluating
+the script and also is used for error reporting; must not be NULL.
 .AP "const char" *start in
 Pointer to first character in string to parse.
 .AP int numBytes in
@@ -191,16 +187,6 @@ code with one of the values \fBTCL_OK\fR, \fBTCL_ERROR\fR,
 some other integer value originating in an extension.
 In addition, a result value or error message is left in \fIinterp\fR's
 result; it can be retrieved using \fBTcl_GetObjResult\fR.
-.PP
-\fBTcl_EvalTokens\fR differs from \fBTcl_EvalTokensStandard\fR only in
-the return convention used: it returns the result in a new Tcl_Obj.
-The reference count of the value returned as result has been
-incremented, so the caller must
-invoke \fBTcl_DecrRefCount\fR when it is finished with the value.
-If an error or other exception occurs while evaluating the tokens
-(such as a reference to a non-existent variable) then the return value
-is NULL and an error message is left in \fIinterp\fR's result. The use
-of \fBTcl_EvalTokens\fR is deprecated.
 .SH "TCL_PARSE STRUCTURE"
 .PP
 \fBTcl_ParseCommand\fR, \fBTcl_ParseExpr\fR, \fBTcl_ParseBraces\fR,
@@ -222,8 +208,8 @@ typedef struct Tcl_Parse {
 typedef struct Tcl_Token {
     int \fItype\fR;
     const char *\fIstart\fR;
-    int \fIsize\fR;
-    int \fInumComponents\fR;
+    size_t \fIsize\fR;
+    size_t \fInumComponents\fR;
 } \fBTcl_Token\fR;
 .CE
 .PP

doc/Preserve.3

@@ -21,7 +21,7 @@ Tcl_Preserve, Tcl_Release, Tcl_EventuallyFree \- avoid freeing storage while it
 \fBTcl_EventuallyFree\fR(\fIclientData, freeProc\fR)
 .SH ARGUMENTS
 .AS Tcl_FreeProc clientData
-.AP ClientData clientData in
+.AP void *clientData in
 Token describing structure to be freed or reallocated.  Usually a pointer
 to memory for structure.
 .AP Tcl_FreeProc *freeProc in
@@ -91,7 +91,7 @@ reasons, but the value is the same.
 .PP
 When the \fIclientData\fR argument to \fBTcl_EventuallyFree\fR
 refers to storage allocated and returned by a prior call to
-\fBTcl_Alloc\fR, \fBckalloc\fR, or another function of the Tcl library,
+\fBTcl_Alloc\fR or another function of the Tcl library,
 then the \fIfreeProc\fR argument should be given the special value of
 \fBTCL_DYNAMIC\fR.
 .PP

doc/PrintDbl.3

@@ -18,10 +18,7 @@ Tcl_PrintDouble \- Convert floating value to string
 .SH ARGUMENTS
 .AS Tcl_Interp *interp out
 .AP Tcl_Interp *interp in
-Before Tcl 8.0, the \fBtcl_precision\fR variable in this interpreter
-controlled the conversion.  As of Tcl 8.0, this argument is ignored and
-the conversion is controlled by the \fBtcl_precision\fR variable
-that is now shared by all interpreters.
+This argument is ignored.
 .AP double value in
 Floating-point value to be converted.
 .AP char *dst out
@@ -41,9 +38,7 @@ so that it does not look like an integer.  Where \fB%g\fR would
 generate an integer with no decimal point, \fBTcl_PrintDouble\fR adds
 .QW .0 .
 .PP
-If the \fBtcl_precision\fR value is non-zero, the result will have
-precisely that many digits of significance.  If the value is zero
-(the default), the result will have the fewest digits needed to
+The result will have the fewest digits needed to
 represent the number in such a way that \fBTcl_NewDoubleObj\fR
 will generate the same number when presented with the given string.
 IEEE semantics of rounding to even apply to the conversion.

doc/RecEvalObj.3

@@ -31,7 +31,7 @@ the command at global level instead of the current stack level.
 .SH DESCRIPTION
 .PP
 \fBTcl_RecordAndEvalObj\fR is invoked to record a command as an event
-on the history list and then execute it using \fBTcl_EvalObjEx\fR
+on the history list and then execute it using \fBTcl_EvalObjEx\fR.
 It returns a completion code such as \fBTCL_OK\fR just like \fBTcl_EvalObjEx\fR,
 as well as a result value containing additional information
 (a result value or error message)

doc/SetRecLmt.3

@@ -29,7 +29,7 @@ New limit for nested calls to \fBTcl_Eval\fR for \fIinterp\fR.
 .PP
 At any given time Tcl enforces a limit on the number of recursive
 calls that may be active for \fBTcl_Eval\fR and related procedures
-such as \fBTcl_GlobalEval\fR.
+such as \fBTcl_EvalEx\fR.
 Any call to \fBTcl_Eval\fR that exceeds this depth is aborted with
 an error.
 By default the recursion limit is 1000.

doc/SetResult.3

@@ -9,7 +9,7 @@
 .so man.macros
 .BS
 .SH NAME
-Tcl_SetObjResult, Tcl_GetObjResult, Tcl_SetResult, Tcl_GetStringResult, Tcl_AppendResult, Tcl_AppendResultVA, Tcl_AppendElement, Tcl_ResetResult, Tcl_TransferResult, Tcl_FreeResult \- manipulate Tcl result
+Tcl_SetObjResult, Tcl_GetObjResult, Tcl_SetResult, Tcl_GetStringResult, Tcl_AppendResult, Tcl_AppendElement, Tcl_ResetResult, Tcl_TransferResult, Tcl_FreeResult \- manipulate Tcl result
 .SH SYNOPSIS
 .nf
 \fB#include <tcl.h>\fR
@@ -26,8 +26,6 @@ const char *
 .sp
 \fBTcl_AppendResult\fR(\fIinterp, result, result, ... , \fB(char *) NULL\fR)
 .sp
-\fBTcl_AppendResultVA\fR(\fIinterp, argList\fR)
-.sp
 \fBTcl_ResetResult\fR(\fIinterp\fR)
 .sp
 .VS 8.6
@@ -152,9 +150,6 @@ extensions.
 Any number of \fIresult\fR arguments may be passed in a single
 call; the last argument in the list must be a NULL pointer.
 .PP
-\fBTcl_AppendResultVA\fR is the same as \fBTcl_AppendResult\fR except that
-instead of taking a variable number of arguments it takes an argument list.
-.PP
 .VS 8.6
 \fBTcl_TransferResult\fR moves a result from one interpreter to another,
 optionally (dependent on the \fIresult\fR parameter) including the error
@@ -197,19 +192,6 @@ It also sets \fIinterp->freeProc\fR to zero, but does not
 change \fIinterp->result\fR or clear error state.
 \fBTcl_FreeResult\fR is most commonly used when a procedure
 is about to replace one result value with another.
-.SS "DIRECT ACCESS TO INTERP->RESULT"
-.PP
-It used to be legal for programs to
-directly read and write \fIinterp->result\fR
-to manipulate the interpreter result.  The Tcl headers no longer
-permit this access by default, and C code still doing this must
-be updated to use supported routines \fBTcl_GetObjResult\fR,
-\fBTcl_GetStringResult\fR, \fBTcl_SetObjResult\fR, and \fBTcl_SetResult\fR.
-As a migration aid, access can be restored with the compiler directive
-.CS
-#define USE_INTERP_RESULT
-.CE
-but this is meant only to offer life support to otherwise dead code.
 .SH "THE TCL_FREEPROC ARGUMENT TO TCL_SETRESULT"
 .PP
 \fBTcl_SetResult\fR's \fIfreeProc\fR argument specifies how

doc/SplitList.3

@@ -20,16 +20,16 @@ int
 char *
 \fBTcl_Merge\fR(\fIargc, argv\fR)
 .sp
-int
+size_t
 \fBTcl_ScanElement\fR(\fIsrc, flagsPtr\fR)
 .sp
-int
+size_t
 \fBTcl_ScanCountedElement\fR(\fIsrc, length, flagsPtr\fR)
 .sp
-int
+size_t
 \fBTcl_ConvertElement\fR(\fIsrc, dst, flags\fR)
 .sp
-int
+size_t
 \fBTcl_ConvertCountedElement\fR(\fIsrc, length, dst, flags\fR)
 .SH ARGUMENTS
 .AS "const char *const" ***argvPtr out
@@ -55,7 +55,7 @@ String that is to become an element of a list.
 .AP int *flagsPtr in
 Pointer to word to fill in with information about \fIsrc\fR.
 The value of *\fIflagsPtr\fR must be passed to \fBTcl_ConvertElement\fR.
-.AP int length in
+.AP size_t length in
 Number of bytes in string \fIsrc\fR.
 .AP char *dst in
 Place to copy converted list element.  Must contain enough characters

doc/StringObj.3

@@ -8,7 +8,7 @@
 .so man.macros
 .BS
 .SH NAME
-Tcl_NewStringObj, Tcl_NewUnicodeObj, Tcl_SetStringObj, Tcl_SetUnicodeObj, Tcl_GetStringFromObj, Tcl_GetString, Tcl_GetUnicodeFromObj, Tcl_GetUnicode, Tcl_GetUniChar, Tcl_GetCharLength, Tcl_GetRange, Tcl_AppendToObj, Tcl_AppendUnicodeToObj, Tcl_AppendObjToObj, Tcl_AppendStringsToObj, Tcl_AppendStringsToObjVA, Tcl_AppendLimitedToObj, Tcl_Format, Tcl_AppendFormatToObj, Tcl_ObjPrintf, Tcl_AppendPrintfToObj, Tcl_SetObjLength, Tcl_AttemptSetObjLength, Tcl_ConcatObj \- manipulate Tcl values as strings
+Tcl_NewStringObj, Tcl_NewUnicodeObj, Tcl_SetStringObj, Tcl_SetUnicodeObj, Tcl_GetStringFromObj, Tcl_GetString, Tcl_GetUnicodeFromObj, Tcl_GetUnicode, Tcl_GetUniChar, Tcl_GetCharLength, Tcl_GetRange, Tcl_AppendToObj, Tcl_AppendUnicodeToObj, Tcl_AppendObjToObj, Tcl_AppendStringsToObj, Tcl_AppendLimitedToObj, Tcl_Format, Tcl_AppendFormatToObj, Tcl_ObjPrintf, Tcl_AppendPrintfToObj, Tcl_SetObjLength, Tcl_AttemptSetObjLength, Tcl_ConcatObj \- manipulate Tcl values as strings
 .SH SYNOPSIS
 .nf
 \fB#include <tcl.h>\fR
@@ -59,9 +59,6 @@ void
 \fBTcl_AppendStringsToObj\fR(\fIobjPtr, string, string, ... \fB(char *) NULL\fR)
 .sp
 void
-\fBTcl_AppendStringsToObjVA\fR(\fIobjPtr, argList\fR)
-.sp
-void
 \fBTcl_AppendLimitedToObj\fR(\fIobjPtr, bytes, length, limit, ellipsis\fR)
 .sp
 Tcl_Obj *
@@ -90,29 +87,29 @@ Tcl_Obj *
 Points to the first byte of an array of UTF-8-encoded bytes
 used to set or append to a string value.
 This byte array may contain embedded null characters
-unless \fInumChars\fR is negative.  (Applications needing null bytes
+unless \fInumChars\fR is (size_t)-1.  (Applications needing null bytes
 should represent them as the two-byte sequence \fI\e700\e600\fR, use
 \fBTcl_ExternalToUtf\fR to convert, or \fBTcl_NewByteArrayObj\fR if
 the string is a collection of uninterpreted bytes.)
-.AP int length in
+.AP size_t length in
 The number of bytes to copy from \fIbytes\fR when
 initializing, setting, or appending to a string value.
-If negative, all bytes up to the first null are used.
+If (size_t)-1, all bytes up to the first null are used.
 .AP "const Tcl_UniChar" *unicode in
 Points to the first byte of an array of Unicode characters
 used to set or append to a string value.
 This byte array may contain embedded null characters
 unless \fInumChars\fR is negative.
-.AP int numChars in
+.AP size_t numChars in
 The number of Unicode characters to copy from \fIunicode\fR when
 initializing, setting, or appending to a string value.
-If negative, all characters up to the first null character are used.
-.AP int index in
+If (size_t)-1, all characters up to the first null character are used.
+.AP size_t index in
 The index of the Unicode character to return.
-.AP int first in
+.AP size_t first in
 The index of the first Unicode character in the Unicode range to be
 returned as a new value.
-.AP int last in
+.AP size_t last in
 The index of the last Unicode character in the Unicode range to be
 returned as a new value.
 .AP Tcl_Obj *objPtr in/out
@@ -127,7 +124,7 @@ Null-terminated string value to append to \fIobjPtr\fR.
 .AP va_list argList in
 An argument list which must have been initialized using
 \fBva_start\fR, and cleared using \fBva_end\fR.
-.AP int limit in
+.AP size_t limit in
 Maximum number of bytes to be appended.
 .AP "const char" *ellipsis in
 Suffix to append when the limit leads to string truncation.
@@ -140,7 +137,7 @@ Format control string including % conversion specifiers.
 The number of elements to format or concatenate.
 .AP Tcl_Obj *objv[] in
 The array of values to format or concatenate.
-.AP int newLength in
+.AP size_t newLength in
 New length for the string value of \fIobjPtr\fR, not including the
 final null character.
 .BE
@@ -247,10 +244,6 @@ values may contain internal null characters).  Any number of
 \fIstring\fR arguments may be provided, but the last argument
 must be a NULL pointer to indicate the end of the list.
 .PP
-\fBTcl_AppendStringsToObjVA\fR is the same as \fBTcl_AppendStringsToObj\fR
-except that instead of taking a variable number of arguments it takes an
-argument list.
-.PP
 \fBTcl_AppendLimitedToObj\fR is similar to \fBTcl_AppendToObj\fR
 except that it imposes a limit on how many bytes are appended.
 This can be handy when the string to be appended might be

doc/TCL_MEM_DEBUG.3

@@ -34,7 +34,7 @@ and the Tcl \fBmemory\fR command can be used to validate and examine
 memory usage.
 .SH "GUARD ZONES"
 .PP
-When memory debugging is enabled, whenever a call to \fBckalloc\fR is
+When memory debugging is enabled, whenever a call to \fBTcl_Alloc\fR is
 made, slightly more memory than requested is allocated so the memory
 debugging code can keep track of the allocated memory, and eight-byte
 .QW "guard zones"
@@ -44,7 +44,7 @@ C #define \fBLOW_GUARD_SIZE\fR and #define \fBHIGH_GUARD_SIZE\fR
 in the file \fIgeneric/tclCkalloc.c\fR \(em it can
 be extended if you suspect large overwrite problems, at some cost in
 performance.)  A known pattern is written into the guard zones and, on
-a call to \fBckfree\fR, the guard zones of the space being freed are
+a call to \fBTcl_Free\fR, the guard zones of the space being freed are
 checked to see if either zone has been modified in any way.  If one
 has been, the guard bytes and their new contents are identified, and a
 .QW "low guard failed"
@@ -53,7 +53,7 @@ or
 message is issued.  The
 .QW "guard failed"
 message includes the address of the memory packet and
-the file name and line number of the code that called \fBckfree\fR.
+the file name and line number of the code that called \fBTcl_Free\fR.
 This allows you to detect the common sorts of one-off problems, where
 not enough space was allocated to contain the data written, for
 example.
@@ -66,15 +66,15 @@ suspect (or know) that corruption is occurring before the Tcl
 interpreter comes up far enough for you to issue commands, you can set
 \fBMEM_VALIDATE\fR define, recompile tclCkalloc.c and rebuild Tcl.
 This will enable memory validation from the first call to
-\fBckalloc\fR, again, at a large performance impact.
+\fBTcl_Alloc\fR, again, at a large performance impact.
 .PP
 If you are desperate and validating memory on every call to
-\fBckalloc\fR and \fBckfree\fR is not enough, you can explicitly call
+\fBTcl_Alloc\fR and \fBTcl_Free\fR is not enough, you can explicitly call
 \fBTcl_ValidateAllMemory\fR directly at any point.  It takes a \fIchar
 *\fR and an \fIint\fR which are normally the filename and line number
 of the caller, but they can actually be anything you want.  Remember
 to remove the calls after you find the problem.
 .SH "SEE ALSO"
-ckalloc, memory, Tcl_ValidateAllMemory, Tcl_DumpActiveMemory
+Tcl_Alloc, memory, Tcl_ValidateAllMemory, Tcl_DumpActiveMemory
 .SH KEYWORDS
 memory, debug

doc/TclZlib.3

@@ -88,7 +88,7 @@ The initial value for the checksum algorithm.
 .AP "unsigned char" *bytes in
 An array of bytes to run the checksum algorithm over, or NULL to get the
 recommended initial value for the checksum algorithm.
-.AP int length in
+.AP size_t length in
 The number of bytes in the array.
 .AP int mode in
 What mode to operate the stream in. Should be either
@@ -107,8 +107,8 @@ if the currently compressed data must be made available for access using
 into a state where the decompressor can recover from on corruption, or
 \fBTCL_ZLIB_FINALIZE\fR to ensure that the stream is finished and that any
 trailer demanded by the format is written.
-.AP int count in
-The maximum number of bytes to get from the stream, or -1 to get all remaining
+.AP size_t count in
+The maximum number of bytes to get from the stream, or (size_t)-1 to get all remaining
 bytes from the stream's buffers.
 .AP Tcl_Obj *compDict in
 A byte array value that is the compression dictionary to use with the stream.

doc/Thread.3

@@ -45,7 +45,9 @@ int
 .AP Tcl_Condition *condPtr in
 A condition variable, which must be associated with a mutex lock.
 .AP Tcl_Mutex *mutexPtr in
-A mutex lock.
+.VS TIP509
+A recursive mutex lock.
+.VE TIP509
 .AP "const Tcl_Time" *timePtr in
 A time limit on the condition wait.  NULL to wait forever.
 Note that a polling value of 0 seconds does not make much sense.
@@ -65,7 +67,7 @@ Id of the thread waited upon.
 .AP Tcl_ThreadCreateProc *proc in
 This procedure will act as the \fBmain()\fR of the newly created
 thread. The specified \fIclientData\fR will be its sole argument.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary information. Passed as sole argument to the \fIproc\fR.
 .AP int stackSize in
 The size of the stack given to the new thread.
@@ -140,8 +142,12 @@ of code by calling \fBTcl_MutexLock\fR and \fBTcl_MutexUnlock\fR.
 If one thread holds a mutex, any other thread calling \fBTcl_MutexLock\fR will
 block until \fBTcl_MutexUnlock\fR is called.
 A mutex can be destroyed after its use by calling \fBTcl_MutexFinalize\fR.
-The result of locking a mutex twice from the same thread is undefined.
-On some platforms it will result in a deadlock.
+.VS TIP509
+Mutexes are reentrant: they can be locked several times from the same
+thread. However there must be exactly one call to
+\fBTcl_MutexUnlock\fR for each call to \fBTcl_MutexLock\fR in order
+for a thread to release a mutex completely.
+.VE TIP509
 The \fBTcl_MutexLock\fR, \fBTcl_MutexUnlock\fR and \fBTcl_MutexFinalize\fR
 procedures are defined as empty macros if not compiling with threads enabled.
 For declaration of mutexes the \fBTCL_DECLARE_MUTEX\fR macro should be used.
@@ -202,7 +208,7 @@ value and then finishes.
 .CS
 static \fBTcl_ThreadCreateType\fR
 MyThreadImplFunc(
-    ClientData clientData)
+    void *clientData)
 {
     int i, limit = (int) clientData;
     for (i=0 ; i<limit ; i++) {
@@ -217,7 +223,7 @@ would do this:
 .PP
 .CS
 int limit = 1000000000;
-ClientData limitData = (void*)((intptr_t) limit);
+void *limitData = (void*)((intptr_t) limit);
 Tcl_ThreadId id;    \fI/* holds identity of thread created */\fR
 int result;
 

doc/TraceCmd.3

@@ -13,7 +13,7 @@ Tcl_CommandTraceInfo, Tcl_TraceCommand, Tcl_UntraceCommand \- monitor renames an
 .nf
 \fB#include <tcl.h>\fR
 .sp
-ClientData
+void *
 \fBTcl_CommandTraceInfo(\fIinterp, cmdName, flags, proc, prevClientData\fB)\fR
 .sp
 int
@@ -32,9 +32,9 @@ OR'ed collection of the values \fBTCL_TRACE_RENAME\fR and
 \fBTCL_TRACE_DELETE\fR.
 .AP Tcl_CommandTraceProc *proc in
 Procedure to call when specified operations occur to \fIcmdName\fR.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary argument to pass to \fIproc\fR.
-.AP ClientData prevClientData in
+.AP void *prevClientData in
 If non-NULL, gives last value returned by \fBTcl_CommandTraceInfo\fR,
 so this call will return information about next trace.  If NULL, this
 call will return information about first trace.
@@ -65,7 +65,7 @@ match the type \fBTcl_CommandTraceProc\fR:
 .PP
 .CS
 typedef void \fBTcl_CommandTraceProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Interp *\fIinterp\fR,
         const char *\fIoldName\fR,
         const char *\fInewName\fR,
@@ -74,7 +74,7 @@ typedef void \fBTcl_CommandTraceProc\fR(
 .PP
 The \fIclientData\fR and \fIinterp\fR parameters will have the same
 values as those passed to \fBTcl_TraceCommand\fR when the trace was
-created.  \fIClientData\fR typically points to an application-specific
+created.  \fIclientData\fR typically points to an application-specific
 data structure that describes what to do when \fIproc\fR is invoked.
 \fIOldName\fR gives the name of the command being renamed, and
 \fInewName\fR gives the name that the command is being renamed to (or

doc/TraceVar.3

@@ -24,13 +24,13 @@ int
 .sp
 \fBTcl_UntraceVar2(\fIinterp, name1, name2, flags, proc, clientData\fB)\fR
 .sp
-ClientData
+void *
 \fBTcl_VarTraceInfo(\fIinterp, varName, flags, proc, prevClientData\fB)\fR
 .sp
-ClientData
+void *
 \fBTcl_VarTraceInfo2(\fIinterp, name1, name2, flags, proc, prevClientData\fB)\fR
 .SH ARGUMENTS
-.AS Tcl_VarTraceProc prevClientData
+.AS void *prevClientData
 .AP Tcl_Interp *interp in
 Interpreter containing variable.
 .AP "const char" *varName in
@@ -46,7 +46,7 @@ Not all flags are used by all
 procedures.  See below for more information.
 .AP Tcl_VarTraceProc *proc in
 Procedure to invoke whenever one of the traced operations occurs.
-.AP ClientData clientData in
+.AP void *clientData in
 Arbitrary one-word value to pass to \fIproc\fR.
 .AP "const char" *name1 in
 Name of scalar or array variable (without array index).
@@ -54,7 +54,7 @@ Name of scalar or array variable (without array index).
 For a trace on an element of an array, gives the index of the
 element.  For traces on scalar variables or on whole arrays,
 is NULL.
-.AP ClientData prevClientData in
+.AP void *prevClientData in
 If non-NULL, gives last value returned by \fBTcl_VarTraceInfo\fR or
 \fBTcl_VarTraceInfo2\fR, so this call will return information about
 next trace.  If NULL, this call will return information about first
@@ -107,7 +107,7 @@ before an array set, but that will trigger write traces.
 \fBTCL_TRACE_RESULT_DYNAMIC\fR
 The result of invoking the \fIproc\fR is a dynamically allocated
 string that will be released by the Tcl library via a call to
-\fBckfree\fR.  Must not be specified at the same time as
+\fBTcl_Free\fR.  Must not be specified at the same time as
 \fBTCL_TRACE_RESULT_OBJECT\fR.
 .TP
 \fBTCL_TRACE_RESULT_OBJECT\fR
@@ -124,7 +124,7 @@ It should have arguments and result that match the type
 .PP
 .CS
 typedef char *\fBTcl_VarTraceProc\fR(
-        ClientData \fIclientData\fR,
+        void *\fIclientData\fR,
         Tcl_Interp *\fIinterp\fR,
         char *\fIname1\fR,
         char *\fIname2\fR,
@@ -134,7 +134,7 @@ typedef char *\fBTcl_VarTraceProc\fR(
 The \fIclientData\fR and \fIinterp\fR parameters will
 have the same values as those passed to \fBTcl_TraceVar\fR when the
 trace was created.
-\fIClientData\fR typically points to an application-specific
+\fIclientData\fR typically points to an application-specific
 data structure that describes what to do when \fIproc\fR
 is invoked.
 \fIName1\fR and \fIname2\fR give the name of the traced variable
@@ -312,7 +312,7 @@ The return value must be a pointer to a static character string
 containing an error message,
 unless (\fIexactly\fR one of) the \fBTCL_TRACE_RESULT_DYNAMIC\fR and
 \fBTCL_TRACE_RESULT_OBJECT\fR flags is set, which specify that the result is
-either a dynamic string (to be released with \fBckfree\fR) or a
+either a dynamic string (to be released with \fBTcl_Free\fR) or a
 Tcl_Obj* (cast to char* and to be released with
 \fBTcl_DecrRefCount\fR) containing the error message.
 If a trace procedure returns an error, no further traces are

doc/Utf.3

@@ -31,19 +31,19 @@ int
 \fBTcl_UniCharLen\fR(\fIuniStr\fR)
 .sp
 int
-\fBTcl_UniCharNcmp\fR(\fIucs, uct, numChars\fR)
+\fBTcl_UniCharNcmp\fR(\fIucs, uct, uniLength\fR)
 .sp
 int
-\fBTcl_UniCharNcasecmp\fR(\fIucs, uct, numChars\fR)
+\fBTcl_UniCharNcasecmp\fR(\fIucs, uct, uniLength\fR)
 .sp
 int
 \fBTcl_UniCharCaseMatch\fR(\fIuniStr, uniPattern, nocase\fR)
 .sp
 int
-\fBTcl_UtfNcmp\fR(\fIcs, ct, numChars\fR)
+\fBTcl_UtfNcmp\fR(\fIcs, ct, length\fR)
 .sp
 int
-\fBTcl_UtfNcasecmp\fR(\fIcs, ct, numChars\fR)
+\fBTcl_UtfNcasecmp\fR(\fIcs, ct, length\fR)
 .sp
 int
 \fBTcl_UtfCharComplete\fR(\fIsrc, length\fR)
@@ -69,7 +69,7 @@ int
 const char *
 \fBTcl_UtfAtIndex\fR(\fIsrc, index\fR)
 .sp
-int
+size_t
 \fBTcl_UtfBackslash\fR(\fIsrc, readPtr, dst\fR)
 .SH ARGUMENTS
 .AS "const Tcl_UniChar" *uniPattern in/out
@@ -94,19 +94,16 @@ A null-terminated Unicode string.
 A null-terminated Unicode string.
 .AP "const Tcl_UniChar" *uniPattern in
 A null-terminated Unicode string.
-.AP int length in
+.AP size_t length in
 The length of the UTF-8 string in bytes (not UTF-8 characters).  If
-negative, all bytes up to the first null byte are used.
-.AP int uniLength in
-The length of the Unicode string in characters.  Must be greater than or
-equal to 0.
+(size_t)-1, all bytes up to the first null byte are used.
+.AP size_t uniLength in
+The length of the Unicode string in characters.
 .AP "Tcl_DString" *dsPtr in/out
 A pointer to a previously initialized \fBTcl_DString\fR.
-.AP "unsigned long" numChars in
-The number of characters to compare.
 .AP "const char" *start in
 Pointer to the beginning of a UTF-8 string.
-.AP int index in
+.AP size_t index in
 The index of a character (not byte) in the UTF-8 string.
 .AP int *readPtr out
 If non-NULL, filled with the number of bytes in the backslash sequence,
@@ -175,7 +172,7 @@ the number of Unicode characters (not bytes) in that string.
 \fBTcl_UniCharNcmp\fR and \fBTcl_UniCharNcasecmp\fR correspond to
 \fBstrncmp\fR and \fBstrncasecmp\fR, respectively, for Unicode characters.
 They accept two null-terminated Unicode strings and the number of characters
-to compare.  Both strings are assumed to be at least \fInumChars\fR characters
+to compare.  Both strings are assumed to be at least \fIuniLength\fR characters
 long. \fBTcl_UniCharNcmp\fR  compares the two strings character-by-character
 according to the Unicode character ordering.  It returns an integer greater
 than, equal to, or less than 0 if the first string is greater than, equal
@@ -189,7 +186,7 @@ be case sensitive and returns whether the string matches the pattern.
 .PP
 \fBTcl_UtfNcmp\fR corresponds to \fBstrncmp\fR for UTF-8 strings. It
 accepts two null-terminated UTF-8 strings and the number of characters
-to compare.  (Both strings are assumed to be at least \fInumChars\fR
+to compare.  (Both strings are assumed to be at least \fIlength\fR
 characters long.)  \fBTcl_UtfNcmp\fR compares the two strings
 character-by-character according to the Unicode character ordering.
 It returns an integer greater than, equal to, or less than 0 if the
@@ -241,12 +238,12 @@ return value will be \fIstart\fR.
 Pascal Ord() function.  It returns the Tcl_UniChar represented at the
 specified character (not byte) \fIindex\fR in the UTF-8 string
 \fIsrc\fR.  The source string must contain at least \fIindex\fR
-characters.  Behavior is undefined if a negative \fIindex\fR is given.
+characters.
 .PP
 \fBTcl_UtfAtIndex\fR returns a pointer to the specified character (not
 byte) \fIindex\fR in the UTF-8 string \fIsrc\fR.  The source string must
 contain at least \fIindex\fR characters.  This is equivalent to calling
-\fBTcl_UtfNext\fR \fIindex\fR times.  If a negative \fIindex\fR is given,
+\fBTcl_UtfNext\fR \fIindex\fR times.  If \fIindex\fR is (size_t)-1,
 the return pointer points to the first character in the source string.
 .PP
 \fBTcl_UtfBackslash\fR is a utility procedure used by several of the Tcl

doc/case.n

@@ -1,60 +0,0 @@
-'\"
-'\" Copyright (c) 1993 The Regents of the University of California.
-'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
-'\"
-'\" See the file "license.terms" for information on usage and redistribution
-'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-'\"
-.TH case n 7.0 Tcl "Tcl Built-In Commands"
-.so man.macros
-.BS
-'\" Note:  do not modify the .SH NAME line immediately below!
-.SH NAME
-case \- Evaluate one of several scripts, depending on a given value
-.SH SYNOPSIS
-\fBcase\fI string \fR?\fBin\fR? \fIpatList body \fR?\fIpatList body \fR...?
-.sp
-\fBcase\fI string \fR?\fBin\fR? {\fIpatList body \fR?\fIpatList body \fR...?}
-.BE
-
-.SH DESCRIPTION
-.PP
-\fINote: the \fBcase\fI command is obsolete and is supported only
-for backward compatibility.  At some point in the future it may be
-removed entirely.  You should use the \fBswitch\fI command instead.\fR
-.PP
-The \fBcase\fR command matches \fIstring\fR against each of
-the \fIpatList\fR arguments in order.
-Each \fIpatList\fR argument is a list of one or
-more patterns.  If any of these patterns matches \fIstring\fR then
-\fBcase\fR evaluates the following \fIbody\fR argument
-by passing it recursively to the Tcl interpreter and returns the result
-of that evaluation.
-Each \fIpatList\fR argument consists of a single
-pattern or list of patterns.  Each pattern may contain any of the wild-cards
-described under \fBstring match\fR.  If a \fIpatList\fR
-argument is \fBdefault\fR, the corresponding body will be evaluated
-if no \fIpatList\fR matches \fIstring\fR.  If no \fIpatList\fR argument
-matches \fIstring\fR and no default is given, then the \fBcase\fR
-command returns an empty string.
-.PP
-Two syntaxes are provided for the \fIpatList\fR and \fIbody\fR arguments.
-The first uses a separate argument for each of the patterns and commands;
-this form is convenient if substitutions are desired on some of the
-patterns or commands.
-The second form places all of the patterns and commands together into
-a single argument; the argument must have proper list structure, with
-the elements of the list being the patterns and commands.
-The second form makes it easy to construct multi-line case commands,
-since the braces around the whole list make it unnecessary to include a
-backslash at the end of each line.
-Since the \fIpatList\fR arguments are in braces in the second form,
-no command or variable substitutions are performed on them;  this makes
-the behavior of the second form different than the first form in some
-cases.
-
-.SH "SEE ALSO"
-switch(n)
-
-.SH KEYWORDS
-case, match, regular expression

doc/cd.n

@@ -41,3 +41,7 @@ current one:
 filename(n), glob(n), pwd(n)
 .SH KEYWORDS
 working directory
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/define.n

@@ -426,7 +426,7 @@ Some of the configurable definitions of a class or object are \fIslotted
 definitions\fR. This means that the configuration is implemented by a slot
 object, that is an instance of the class \fBoo::Slot\fR, which manages a list
 of values (class names, variable names, etc.) that comprises the contents of
-the slot. The class defines three operations (as methods) that may be done on
+the slot. The class defines five operations (as methods) that may be done on
 the slot:
 .TP
 \fIslot\fR \fB\-append\fR ?\fImember ...\fR?
@@ -437,6 +437,16 @@ This appends the given \fImember\fR elements to the slot definition.
 .
 This sets the slot definition to the empty list.
 .TP
+\fIslot\fR \fB\-prepend\fR ?\fImember ...\fR?
+.VS TIP516
+This prepends the given \fImember\fR elements to the slot definition.
+.VE TIP516
+.TP
+\fIslot\fR \fB\-remove\fR ?\fImember ...\fR?
+.VS TIP516
+This removes the given \fImember\fR elements from the slot definition.
+.VE TIP516
+.TP
 \fIslot\fR \fB\-set\fR ?\fImember ...\fR?
 .
 This replaces the slot definition with the given \fImember\fR elements.
@@ -454,15 +464,52 @@ and these methods which provide the implementation interface:
 .TP
 \fIslot\fR \fBGet\fR
 .
-Returns a list that is the current contents of the slot. This method must
-always be called from a stack frame created by a call to \fBoo::define\fR or
-\fBoo::objdefine\fR.
+Returns a list that is the current contents of the slot, but does not modify
+the slot. This method must always be called from a stack frame created by a
+call to \fBoo::define\fR or \fBoo::objdefine\fR. This method \fIshould not\fR
+return an error unless it is called from outside a definition context or with
+the wrong number of arguments.
+.RS
+.PP
+.VS TIP516
+The elements of the list should be fully resolved, if that is a meaningful
+concept to the slot.
+.VE TIP516
+.RE
+.TP
+\fIslot\fR \fBResolve\fR \fIslotElement\fR
+.VS TIP516
+Returns \fIslotElement\fR with a resolution operation applied to it, but does
+not modify the slot. For slots of simple strings, this is an operation that
+does nothing, whereas for slots of classes, this maps a class name to its
+fully-qualified class name.  This method must always be called from a stack
+frame created by a call to \fBoo::define\fR or \fBoo::objdefine\fR.  This
+method \fIshould not\fR return an error unless it is called from outside a
+definition context or with the wrong number of arguments; unresolvable
+arguments should be returned as is (as not all slot operations strictly
+require that values are resolvable to work).
+.RS
+.PP
+Implementations \fIshould not\fR enforce uniqueness and ordering constraints
+in this method; that is the responsibility of the \fBSet\fR method.
+.RE
+.VE TIP516
 .TP
 \fIslot\fR \fBSet \fIelementList\fR
 .
 Sets the contents of the slot to the list \fIelementList\fR and returns the
 empty string. This method must always be called from a stack frame created by
-a call to \fBoo::define\fR or \fBoo::objdefine\fR.
+a call to \fBoo::define\fR or \fBoo::objdefine\fR. This method may return an
+error if it rejects the change to the slot contents (e.g., because of invalid
+values) as well as if it is called from outside a definition context or with
+the wrong number of arguments.
+.RS
+.PP
+This method \fImay\fR reorder and filter the elements if this is necessary in
+order to satisfy the underlying constraints of the slot. (For example, slots
+of classes enforce a uniqueness constraint that places each element in the
+earliest location in the slot that it can.)
+.RE
 .PP
 The implementation of these methods is slot-dependent (and responsible for
 accessing the correct part of the class or object definition). Slots also have
@@ -470,10 +517,18 @@ an unknown method handler to tie all these pieces together, and they hide
 their \fBdestroy\fR method so that it is not invoked inadvertently. It is
 \fIrecommended\fR that any user changes to the slot mechanism be restricted to
 defining new operations whose names start with a hyphen.
+.PP
+.VS TIP516
+Most slot operations will initially \fBResolve\fR their argument list, combine
+it with the results of the \fBGet\fR method, and then \fBSet\fR the result.
+Some operations omit one or both of the first two steps; omitting the third
+would result in an idempotent read-only operation (but the standard mechanism
+for reading from slots is via \fBinfo class\fR and \fBinfo object\fR).
+.VE TIP516
 .SH EXAMPLES
 This example demonstrates how to use both forms of the \fBoo::define\fR and
 \fBoo::objdefine\fR commands (they work in the same way), as well as
-illustrating four of the subcommands of them.
+illustrating four of their subcommands.
 .PP
 .CS
 oo::class create c

doc/eof.n

@@ -59,3 +59,7 @@ while {1} {
 file(n), open(n), close(n), fblocked(n), Tcl_StandardChannels(3)
 .SH KEYWORDS
 channel, end of file
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/exit.n

@@ -49,3 +49,7 @@ if {[catch {main} msg options]} {
 exec(n)
 .SH KEYWORDS
 abort, exit, process
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/expr.n

@@ -50,9 +50,7 @@ An integer operand may be specified in decimal (the normal case, the optional
 first two characters are \fB0d\fR), binary
 (the first two characters are \fB0b\fR), octal
 (the first two characters are \fB0o\fR), or hexadecimal
-(the first two characters are \fB0x\fR) form.  For
-compatibility with older Tcl releases, an operand that begins with \fB0\fR is
-interpreted as an octal integer even if the second character is not \fBo\fR.
+(the first two characters are \fB0x\fR) form.
 A floating-point number may be specified in any of several
 common decimal formats, and may use the decimal point \fB.\fR,
 \fBe\fR or \fBE\fR for scientific notation, and

doc/fblocked.n

@@ -65,3 +65,7 @@ vwait forever
 gets(n), open(n), read(n), socket(n), Tcl_StandardChannels(3)
 .SH KEYWORDS
 blocking, nonblocking
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/fileevent.n

@@ -154,3 +154,7 @@ fconfigure(n), gets(n), interp(n), puts(n), read(n), Tcl_StandardChannels(3)
 .SH KEYWORDS
 asynchronous I/O, blocking, channel, event handler, nonblocking, readable,
 script, writable.
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/filename.n

@@ -176,3 +176,7 @@ file(n), glob(n)
 .SH KEYWORDS
 current directory, absolute file name, relative file name,
 volume-relative file name, portability
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/flush.n

@@ -43,3 +43,7 @@ puts "Hello there, $name!"
 file(n), open(n), socket(n), Tcl_StandardChannels(3)
 .SH KEYWORDS
 blocking, buffer, channel, flush, nonblocking, output
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/foreach.n

@@ -102,3 +102,7 @@ for(n), while(n), break(n), continue(n)
 
 .SH KEYWORDS
 foreach, iteration, list, loop
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/global.n

@@ -56,3 +56,7 @@ proc accum {string} {
 namespace(n), upvar(n), variable(n)
 .SH KEYWORDS
 global, namespace, procedure, variable
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/history.n

@@ -100,3 +100,7 @@ the \fBevent\fR operation to retrieve some event,
 and the \fBadd\fR operation to add it to history and execute it.
 .SH KEYWORDS
 event, history, record
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/info.n

@@ -44,6 +44,42 @@ described in \fBCLASS INTROSPECTION\fR below.
 Returns a count of the total number of commands that have been invoked
 in this interpreter.
 .TP
+\fBinfo cmdtype \fIcommandName\fR
+.VS TIP426
+Returns a description of the kind of command named by \fIcommandName\fR.  The
+supported types are:
+.RS
+.IP \fBalias\fR
+Indicates that \fIcommandName\fR was created by \fBinterp alias\fR. Note that
+safe interpreters can only see a subset of aliases (specifically those between
+two commands within themselves).
+.IP \fBcoroutine\fR
+Indicates that \fIcommandName\fR was created by \fBcoroutine\fR.
+.IP \fBensemble\fR
+Indicates that \fIcommandName\fR was created by \fBnamespace ensemble\fR.
+.IP \fBimport\fR
+Indicates that \fIcommandName\fR was created by \fBnamespace import\fR.
+.IP \fBnative\fR
+Indicates that \fIcommandName\fR was created by the \fBTcl_CreateObjProc\fR
+interface directly without further registration of the type of command.
+.IP \fBobject\fR
+Indicates that \fIcommandName\fR is the public command that represents an
+instance of \fBoo::object\fR or one of its subclasses.
+.IP \fBprivateObject\fR
+Indicates that \fIcommandName\fR is the private command (\fBmy\fR by default)
+that represents an instance of \fBoo::object\fR or one of its subclasses.
+.IP \fBproc\fR
+Indicates that \fIcommandName\fR was created by \fBproc\fR.
+.IP \fBslave\fR
+Indicates that \fIcommandName\fR was created by \fBinterp create\fR.
+.IP \fBzlibStream\fR
+Indicates that \fIcommandName\fR was created by \fBzlib stream\fR.
+.PP
+There may be other registered types as well; this is a set that is extensible
+at the implementation level with \fBTcl_RegisterCommandTypeName\fR.
+.RE
+.VE TIP426
+.TP
 \fBinfo commands \fR?\fIpattern\fR?
 .
 If \fIpattern\fR is not specified,

doc/join.n

@@ -42,3 +42,7 @@ set data {1 {2 3} 4 {5 {6 7} 8}}
 list(n), lappend(n), split(n)
 .SH KEYWORDS
 element, join, list, separator
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/llength.n

@@ -53,3 +53,7 @@ list(n), lappend(n), lindex(n), linsert(n), lsearch(n),
 lset(n), lsort(n), lrange(n), lreplace(n)
 .SH KEYWORDS
 element, list, length
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/load.n

@@ -154,7 +154,7 @@ The following is a minimal extension:
 .CS
 #include <tcl.h>
 #include <stdio.h>
-static int fooCmd(ClientData clientData,
+static int fooCmd(void *clientData,
         Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) {
     printf("called with %d arguments\en", objc);
     return TCL_OK;

doc/lrange.n

@@ -76,3 +76,7 @@ lset(n), lreplace(n), lsort(n),
 string(n)
 .SH KEYWORDS
 element, list, range, sublist
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/lrepeat.n

@@ -33,6 +33,9 @@ is identical to \fBlist element ...\fR.
 .CE
 .SH "SEE ALSO"
 list(n), lappend(n), linsert(n), llength(n), lset(n)
-
 .SH KEYWORDS
 element, index, list
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/lreplace.n

@@ -17,7 +17,7 @@ lreplace \- Replace elements in a list with new elements
 .BE
 .SH DESCRIPTION
 .PP
-\fBlreplace\fR returns a new list formed by replacing one or more elements of
+\fBlreplace\fR returns a new list formed by replacing zero or more elements of
 \fIlist\fR with the \fIelement\fR arguments.
 \fIfirst\fR and \fIlast\fR are index values specifying the first and
 last elements of the range to replace.
@@ -27,23 +27,26 @@ supporting simple index arithmetic and indices relative to the
 end of the list.
 0 refers to the first element of the
 list, and \fBend\fR refers to the last element of the list.
-If \fIlist\fR is empty, then \fIfirst\fR and \fIlast\fR are ignored.
 .PP
-If \fIfirst\fR is less than zero, it is considered to refer to before the
-first element of the list.  For non-empty lists, the element indicated
-by \fIfirst\fR must exist or \fIfirst\fR must indicate before the
-start of the list.
+If either \fIfirst\fR or \fIlast\fR is less than zero, it is considered
+to refer to before the first element of the list. This allows \fBlreplace\fR
+to prepend elements to \fIlist\fR.
+.VS TIP505
+If either \fIfirst\fR or \fIlast\fR indicates a position greater than the
+index of the last element of the list, it is treated as if it is an
+index one greater than the last element. This allows \fBlreplace\fR to
+append elements to \fIlist\fR.
+.VE TIP505
 .PP
 If \fIlast\fR is less than \fIfirst\fR, then any specified elements
-will be inserted into the list before the point specified by \fIfirst\fR
+will be inserted into the list before the element specified by \fIfirst\fR
 with no elements being deleted.
 .PP
-The \fIelement\fR arguments specify zero or more new arguments to
+The \fIelement\fR arguments specify zero or more new elements to
 be added to the list in place of those that were deleted.
 Each \fIelement\fR argument will become a separate element of
 the list.  If no \fIelement\fR arguments are specified, then the elements
-between \fIfirst\fR and \fIlast\fR are simply deleted.  If \fIlist\fR
-is empty, any \fIelement\fR arguments are added to the end of the list.
+between \fIfirst\fR and \fIlast\fR are simply deleted.
 .SH EXAMPLES
 .PP
 Replacing an element of a list with another:
@@ -78,9 +81,26 @@ proc lremove {listVariable value} {
     set var [\fBlreplace\fR $var $idx $idx]
 }
 .CE
+.PP
+.VS TIP505
+Appending elements to the list; note that \fBend+2\fR will initially
+be treated as if it is \fB6\fR here, but both that and \fB12345\fR are greater
+than the index of the final item so they behave identically:
+.PP
+.CS
+% set var {a b c d e}
+a b c d e
+% set var [\fBlreplace\fR $var 12345 end+2 f g h i]
+a b c d e f g h i
+.CE
+.VE TIP505
 .SH "SEE ALSO"
 list(n), lappend(n), lindex(n), linsert(n), llength(n), lsearch(n),
 lset(n), lrange(n), lsort(n),
 string(n)
 .SH KEYWORDS
 element, list, replace
+.\" Local variables:
+.\" mode: nroff
+.\" fill-column: 78
+.\" End:

doc/mathfunc.n

@@ -106,10 +106,7 @@ of which work solely with floating-point numbers unless otherwise noted:
 In addition to these predefined functions, applications may
 define additional functions by using \fBproc\fR (or any other method,
 such as \fBinterp alias\fR or \fBTcl_CreateObjCommand\fR) to define
-new commands in the \fBtcl::mathfunc\fR namespace.  In addition, an
-obsolete interface named \fBTcl_CreateMathFunc\fR() is available to
-extensions that are written in C. The latter interface is not recommended
-for new implementations.
+new commands in the \fBtcl::mathfunc\fR namespace.
 .SS "DETAILED DEFINITIONS"
 .TP
 \fBabs \fIarg\fR

doc/memory.n

@@ -25,7 +25,7 @@ Write a list of all currently allocated memory to the specified \fIfile\fR.
 .TP
 \fBmemory break_on_malloc\fR \fIcount\fR
 .
-After the \fIcount\fR allocations have been performed, \fBckalloc\fR
+After the \fIcount\fR allocations have been performed, \fBTcl_Alloc\fR
 outputs a message to this effect and that it is now attempting to enter
 the C debugger.  Tcl will then issue a \fISIGINT\fR signal against itself.
 If you are running Tcl under a C debugger, it should then enter the debugger
@@ -35,8 +35,8 @@ command mode.
 .
 Returns a report containing the total allocations and frees since
 Tcl began, the current packets allocated (the current
-number of calls to \fBckalloc\fR not met by a corresponding call
-to \fBckfree\fR), the current bytes allocated, and the maximum number
+number of calls to \fBTcl_Alloc\fR not met by a corresponding call
+to \fBTcl_Free\fR), the current bytes allocated, and the maximum number
 of packets and bytes allocated.
 .TP
 \fBmemory init \fR[\fBon\fR|\fBoff\fR]
@@ -59,34 +59,34 @@ that memory is properly cleaned up during process exit.
 .TP
 \fBmemory tag\fR \fIstring\fR
 .
-Each packet of memory allocated by \fBckalloc\fR can have associated
+Each packet of memory allocated by \fBTcl_Alloc\fR can have associated
 with it a string-valued tag.  In the lists of allocated memory generated
 by \fBmemory active\fR and \fBmemory onexit\fR, the tag for each packet
 is printed along with other information about the packet.  The
 \fBmemory tag\fR command sets the tag value for subsequent calls
-to \fBckalloc\fR to be \fIstring\fR.
+to \fBTcl_Alloc\fR to be \fIstring\fR.
 .TP
 \fBmemory trace \fR[\fBon\fR|\fBoff\fR]
 .
 Turns memory tracing on or off.  When memory tracing is on, every call
-to \fBckalloc\fR causes a line of trace information to be written to
-\fIstderr\fR, consisting of the word \fIckalloc\fR, followed by the
+to \fBTcl_Alloc\fR causes a line of trace information to be written to
+\fIstderr\fR, consisting of the word \fITcl_Alloc\fR, followed by the
 address returned, the amount of memory allocated, and the C filename
 and line number of the code performing the allocation.  For example:
 .RS
 .PP
 .CS
-ckalloc 40e478 98 tclProc.c 1406
+Tcl_Alloc 40e478 98 tclProc.c 1406
 .CE
 .PP
-Calls to \fBckfree\fR are traced in the same manner.
+Calls to \fBTcl_Free\fR are traced in the same manner.
 .RE
 .TP
 \fBmemory trace_on_at_malloc\fR \fIcount\fR
 .
-Enable memory tracing after \fIcount\fR \fBckalloc\fRs have been performed.
+Enable memory tracing after \fIcount\fR \fBTcl_Alloc\fRs have been performed.
 For example, if you enter \fBmemory trace_on_at_malloc 100\fR,
-after the 100th call to \fBckalloc\fR, memory trace information will begin
+after the 100th call to \fBTcl_Alloc\fR, memory trace information will begin
 being displayed for all allocations and frees.  Since there can be a lot
 of memory activity before a problem occurs, judicious use of this option
 can reduce the slowdown caused by tracing (and the amount of trace information
@@ -97,17 +97,17 @@ occurred since Tcl started is printed on a guard zone failure.
 \fBmemory validate \fR[\fBon\fR|\fBoff\fR]
 .
 Turns memory validation on or off. When memory validation is enabled,
-on every call to \fBckalloc\fR or \fBckfree\fR, the guard zones are
+on every call to \fBTcl_Alloc\fR or \fBTcl_Free\fR, the guard zones are
 checked for every piece of memory currently in existence that was
-allocated by \fBckalloc\fR.  This has a large performance impact and
+allocated by \fBTcl_Alloc\fR.  This has a large performance impact and
 should only be used when overwrite problems are strongly suspected.
 The advantage of enabling memory validation is that a guard zone
-overwrite can be detected on the first call to \fBckalloc\fR or
-\fBckfree\fR after the overwrite occurred, rather than when the
+overwrite can be detected on the first call to \fBTcl_Alloc\fR or
+\fBTcl_Free\fR after the overwrite occurred, rather than when the
 specific memory with the overwritten guard zone(s) is freed, which may
 occur long after the overwrite occurred.
 .SH "SEE ALSO"
-ckalloc, ckfree, Tcl_ValidateAllMemory, Tcl_DumpActiveMemory, TCL_MEM_DEBUG
+Tcl_Alloc, Tcl_Free, Tcl_ValidateAllMemory, Tcl_DumpActiveMemory, TCL_MEM_DEBUG
 .SH KEYWORDS
 memory, debug
 '\"Local Variables:

doc/packagens.n

@@ -48,3 +48,7 @@ At least one \fB\-load\fR or \fB\-source\fR parameter must be given.
 package(n)
 .SH KEYWORDS
 auto-load, index, package, version
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/pid.n

@@ -43,6 +43,9 @@ close $pipeline
 
 .SH "SEE ALSO"
 exec(n), open(n)
-
 .SH KEYWORDS
 file, pipeline, process identifier
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/platform_shell.n

@@ -55,3 +55,7 @@ This command returns the contents of \fBtcl_platform(platform)\fR for
 the specified Tcl shell.
 .SH KEYWORDS
 operating system, cpu architecture, platform, architecture
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/puts.n

@@ -96,3 +96,7 @@ close $chan
 file(n), fileevent(n), Tcl_StandardChannels(3)
 .SH KEYWORDS
 channel, newline, output, write
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/pwd.n

@@ -37,3 +37,7 @@ cd $savedDir
 file(n), cd(n), glob(n), filename(n)
 .SH KEYWORDS
 working directory
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/re_syntax.n

@@ -375,7 +375,7 @@ value of \fBU+\fI10ffff\fR.
 .TP
 \fB\ev\fR
 .
-vertical tab, as in C are all available.
+vertical tab, as in C
 .TP
 \fB\ex\fIhh\fR
 .

doc/rename.n

@@ -43,3 +43,7 @@ proc ::source args {
 namespace(n), proc(n)
 .SH KEYWORDS
 command, delete, namespace, rename
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/scan.n

@@ -224,12 +224,10 @@ set string "#08D03F"
 \fBscan\fR $string "#%2x%2x%2x" r g b
 .CE
 .PP
-Parse a \fIHH:MM\fR time string, noting that this avoids problems with
-octal numbers by forcing interpretation as decimals (if we did not
-care, we would use the \fB%i\fR conversion instead):
+Parse a \fIHH:MM\fR time string:
 .PP
 .CS
-set string "08:08"   ;# *Not* octal!
+set string "08:08"
 if {[\fBscan\fR $string "%d:%d" hours minutes] != 2} {
     error "not a valid time string"
 }

doc/set.n

@@ -73,3 +73,7 @@ practice instead of doing double-dereferencing):
 expr(n), global(n), namespace(n), proc(n), trace(n), unset(n), upvar(n), variable(n)
 .SH KEYWORDS
 read, write, variable
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/source.n

@@ -69,3 +69,7 @@ foreach scriptFile {foo.tcl bar.tcl} {
 file(n), cd(n), encoding(n), info(n)
 .SH KEYWORDS
 file, script
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/tclvars.n

@@ -10,7 +10,7 @@
 .BS
 '\" Note:  do not modify the .SH NAME line immediately below!
 .SH NAME
-argc, argv, argv0, auto_path, env, errorCode, errorInfo, tcl_interactive, tcl_library, tcl_nonwordchars, tcl_patchLevel, tcl_pkgPath, tcl_platform, tcl_precision, tcl_rcFileName, tcl_traceCompile, tcl_traceExec, tcl_wordchars, tcl_version \- Variables used by Tcl
+argc, argv, argv0, auto_path, env, errorCode, errorInfo, tcl_interactive, tcl_library, tcl_nonwordchars, tcl_patchLevel, tcl_pkgPath, tcl_platform, tcl_rcFileName, tcl_traceCompile, tcl_traceExec, tcl_wordchars, tcl_version \- Variables used by Tcl
 .BE
 .SH DESCRIPTION
 .PP
@@ -356,70 +356,6 @@ This gives the size of the native-machine word in bytes (strictly, it
 is same as the result of evaluating \fIsizeof(long)\fR in C.)
 .RE
 .TP
-\fBtcl_precision\fR
-.
-This variable controls the number of digits to generate
-when converting floating-point values to strings.  It defaults
-to 0.  \fIApplications should not change this value;\fR it is
-provided for compatibility with legacy code.
-.PP
-.RS
-The default value of 0 is special, meaning that Tcl should
-convert numbers using as few digits as possible while still
-distinguishing any floating point number from its nearest
-neighbours.  It differs from using an arbitrarily high value
-for \fItcl_precision\fR in that an inexact number like \fI1.4\fR
-will convert as \fI1.4\fR rather than \fI1.3999999999999999\fR
-even though the latter is nearer to the exact value of the
-binary number.
-.RE
-.PP
-.RS
-If \fBtcl_precision\fR is not zero, then when Tcl converts a floating
-point number, it creates a decimal representation of at most
-\fBtcl_precision\fR significant digits; the result may be shorter if
-the shorter result represents the original number exactly. If no
-result of at most \fBtcl_precision\fR digits is an exact representation
-of the original number, the one that is closest to the original
-number is chosen.
-If the original number lies precisely between two equally accurate
-decimal representations, then the one with an even value for the least
-significant digit is chosen; for instance, if \fBtcl_precision\fR is 3, then
-0.3125 will convert to 0.312, not 0.313, while 0.6875 will convert to
-0.688, not 0.687. Any string of trailing zeroes that remains is trimmed.
-.RE
-.PP
-.RS
-a \fBtcl_precision\fR value of 17 digits is
-.QW perfect
-for IEEE floating-point in that it allows
-double-precision values to be converted to strings and back to
-binary with no loss of information. For this reason, you will often
-see it as a value in legacy code that must run on Tcl versions before
-8.5. It is no longer recommended; as noted above, a zero value is the
-preferred method.
-.RE
-.PP
-.RS
-All interpreters in a thread share a single \fBtcl_precision\fR value:
-changing it in one interpreter will affect all other interpreters as
-well.  Safe interpreters are not allowed to modify the
-variable.
-.RE
-.PP
-.RS
-Valid values for \fBtcl_precision\fR range from 0 to 17.
-.RE
-.TP
-\fBtcl_rcFileName\fR
-.
-This variable is used during initialization to indicate the name of a
-user-specific startup file.  If it is set by application-specific
-initialization, then the Tcl startup code will check for the existence
-of this file and \fBsource\fR it if it exists.  For example, for \fBwish\fR
-the variable is set to \fB~/.wishrc\fR for Unix and \fB~/wishrc.tcl\fR
-for Windows.
-.TP
 \fBtcl_traceCompile\fR
 .
 The value of this variable can be set to control

doc/tell.n

@@ -46,3 +46,7 @@ if {[read $chan 6] eq "foobar"} {
 file(n), open(n), close(n), gets(n), seek(n), Tcl_StandardChannels(3)
 .SH KEYWORDS
 access position, channel, seeking
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/unknown.n

@@ -89,3 +89,7 @@ proc \fBunknown\fR args {
 info(n), proc(n), interp(n), library(n), namespace(n)
 .SH KEYWORDS
 error, non-existent command, unknown
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/update.n

@@ -63,3 +63,7 @@ while {!$done} {
 after(n), interp(n)
 .SH KEYWORDS
 asynchronous I/O, event, flush, handler, idle, update
+'\" Local Variables:
+'\" mode: nroff
+'\" fill-column: 78
+'\" End:

doc/uplevel.n

@@ -24,9 +24,9 @@ the result of that evaluation.
 If \fIlevel\fR is an integer then
 it gives a distance (up the procedure calling stack) to move before
 executing the command.  If \fIlevel\fR consists of \fB#\fR followed by
-a number then the number gives an absolute level number.  If \fIlevel\fR
+a integer then the level gives an absolute level.  If \fIlevel\fR
 is omitted then it defaults to \fB1\fR.  \fILevel\fR cannot be
-defaulted if the first \fIcommand\fR argument starts with a digit or \fB#\fR.
+defaulted if the first \fIcommand\fR argument is an integer or starts with \fB#\fR.
 .PP
 For example, suppose that procedure \fBa\fR was invoked
 from top-level, and that it called \fBb\fR, and that \fBb\fR called \fBc\fR.