v0.7: Update changelog, INSTALL, NEWS, README, version string

brlcad patches - DebugLevel enum, schema path

AUTHORS

@@ -13,6 +13,7 @@ Morrison, Christopher Sean (sean, morrison, brlcad)
 Paviot, Thomas (tpaviot)
 Pictor, Mark (mpictor)
 Thomas, Dawn (homovulgaris, madant)
+Wouters, Dave (davyw)
 Yapp, Clifford (starseeker)
 
 Special thanks:

CMakeLists.txt

@@ -1,6 +1,6 @@
 #       C M A K E L I S T S . T X T   F O R   S C L
 #
-# This file is Copyright (c) 2010 United States Government as 
+# This file is Copyright (c) 2010 United States Government as
 # represented by the U.S. Army Research Laboratory.
 #
 # Redistribution and use in source and binary forms, with or without
@@ -32,47 +32,78 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 # *******************************************************************
-# ***                   SCL's CMakeLists.txt                      ***
+# ***                   SC's CMakeLists.txt                      ***
 # *******************************************************************
 
-# This file contains the top level CMakeLists.txt logic for the 
-# SCL software package.
+# This file contains the top level CMakeLists.txt logic for the
+# SC software package.
+
+PROJECT(SC)
+
+# SC version
+SET(SC_VERSION_MAJOR 0)
+SET(SC_VERSION_MINOR 7-dev)
+SET(SC_VERSION ${SC_VERSION_MAJOR}.${SC_VERSION_MINOR})
+
+# SC ABI version. SC_ABI_SOVERSION should be incremented
+# for each release introducing API incompatibilities
+SET(SC_ABI_SOVERSION 2)
+SET(SC_ABI_VERSION ${SC_ABI_SOVERSION}.0.0)
 
 # Minimum required version of CMake
-CMAKE_MINIMUM_REQUIRED(VERSION 2.8)
+CMAKE_MINIMUM_REQUIRED(VERSION 2.8.7)
 IF(COMMAND CMAKE_POLICY)
-    CMAKE_POLICY(SET CMP0003 NEW)
+  CMAKE_POLICY(SET CMP0003 NEW)
 ENDIF(COMMAND CMAKE_POLICY)
 
-# set CMake project name
-PROJECT(SCL)
+IF( NOT DEFINED SC_BUILD_TYPE )
+  SET( SC_BUILD_TYPE "Debug" CACHE STRING "Build type" ) # By default set debug build
+ENDIF( NOT DEFINED SC_BUILD_TYPE )
+IF(NOT SC_IS_SUBBUILD)
+  SET(CMAKE_BUILD_TYPE ${SC_BUILD_TYPE} CACHE INTERNAL "Build type, immutable" FORCE )
+ELSE(NOT SC_IS_SUBBUILD)
+  SET(CMAKE_BUILD_TYPE ${SC_BUILD_TYPE} )
+ENDIF(NOT SC_IS_SUBBUILD)
 
-if( CMAKE_BUILD_TYPE STREQUAL "" )
-  message( "-- Debug build - to override, rerun cmake with '-DCMAKE_BUILD_TYPE=Release'." )
-  set( CMAKE_BUILD_TYPE Debug )
-endif()
+# Define helper macro OPTION_WITH_DEFAULT
+MACRO( OPTION_WITH_DEFAULT OPTION_NAME OPTION_STRING OPTION_DEFAULT )
+  IF( NOT DEFINED ${OPTION_NAME} )
+    SET( ${OPTION_NAME} ${OPTION_DEFAULT} )
+  ENDIF( NOT DEFINED ${OPTION_NAME} )
+  OPTION( ${OPTION_NAME} "${OPTION_STRING}" ${${OPTION_NAME}} )
+ENDMACRO( OPTION_WITH_DEFAULT OPTION_NAME OPTION_STRING OPTION_DEFAULT )
 
 # build shared libs by default
-OPTION(BUILD_SHARED_LIBS "Build shared libraries" ON)
+OPTION_WITH_DEFAULT(SC_BUILD_SHARED_LIBS "Build shared libs" ON )
 
-# build static libs by default
-OPTION(BUILD_STATIC_LIBS "Build static libraries" OFF)
+# don't build static libs by default
+OPTION_WITH_DEFAULT(SC_BUILD_STATIC_LIBS "Build static libs" OFF)
 
-OPTION(PYTHON_GENERATOR "Compile fedex_plus_python" ON)
-OPTION(CPP_GENERATOR "Compile fedex_plus" ON)
+OPTION_WITH_DEFAULT(SC_PYTHON_GENERATOR "Compile fedex_python" ON)
+OPTION_WITH_DEFAULT(SC_CPP_GENERATOR "Compile fedex_plus" ON)
 
-# Set version
-SET(SCL_VERSION_MAJOR "3")
-SET(SCL_VERSION_MINOR "2")
-SET(SCL_VERSION_PATCH "0")
-SET(SCL_VERSION "${SCL_VERSION_MAJOR}.${SCL_VERSION_MINOR}.${SCL_VERSION_PATCH}")
+OPTION_WITH_DEFAULT(SC_MEMMGR_ENABLE_CHECKS "Enable sc_memmgr's memory leak detection" OFF)
+OPTION_WITH_DEFAULT(SC_TRACE_FPRINTF "Enable extra comments in generated code so the code's source in fedex_plus may be located" OFF)
+
+if(NOT DEFINED SC_SDAI_ADDITIONAL_EXES_SRCS )
+  set( SC_SDAI_ADDITIONAL_EXES_SRCS "" CACHE STRING "Source files for additional executables to be linked with SDAI libs" )
+endif(NOT DEFINED SC_SDAI_ADDITIONAL_EXES_SRCS )
+
+#this makes SC_BUILD_SCHEMAS show up in cmake-gui
+if( NOT DEFINED SC_BUILD_SCHEMAS )
+    SET(SC_BUILD_SCHEMAS "ALL" CACHE string "Semicolon-separated list of paths to EXPRESS schemas to be built" )
+endif( NOT DEFINED SC_BUILD_SCHEMAS )
 
 # CMake derives much of its functionality from modules, typically
 # stored in one directory - let CMake know where to find them.
-SET(SCL_CMAKE_DIR "${SCL_SOURCE_DIR}/cmake")
-SET(CMAKE_MODULE_PATH "${SCL_CMAKE_DIR};${CMAKE_MODULE_PATH}")
+SET(SC_CMAKE_DIR "${SC_SOURCE_DIR}/cmake")
+if(NOT IS_SUBBUILD)
+  SET(CMAKE_MODULE_PATH "${SC_CMAKE_DIR};${CMAKE_MODULE_PATH}")
+else(NOT IS_SUBBUILD)
+  SET(CMAKE_MODULE_PATH "${CMAKE_MODULE_PATH};${SC_CMAKE_DIR}")
+endif(NOT IS_SUBBUILD)
 
-INCLUDE(${SCL_CMAKE_DIR}/SCL_Utils.cmake)
+INCLUDE(${SC_CMAKE_DIR}/SC_Utils.cmake)
 
 # Save the current LC_ALL, LC_MESSAGES, and LANG environment variables and set them
 # to "C" so things like date output are as expected
@@ -80,129 +111,200 @@ SET(_orig_lc_all      $ENV{LC_ALL})
 SET(_orig_lc_messages $ENV{LC_MESSAGES})
 SET(_orig_lang        $ENV{LANG})
 IF(_orig_lc_all)
-    SET(ENV{LC_ALL}      C)
+  SET(ENV{LC_ALL}      C)
 ENDIF(_orig_lc_all)
 IF(_orig_lc_messages)
-    SET(ENV{LC_MESSAGES} C)
+  SET(ENV{LC_MESSAGES} C)
 ENDIF(_orig_lc_messages)
 IF(_orig_lang)
-    SET(ENV{LANG}        C)
+  SET(ENV{LANG}        C)
 ENDIF(_orig_lang)
 
-# For NFS volumes, to ensure proper file creation.
-IF(NOT WIN32)
-    IF(NOT UMASK)
-        EXEC_PROGRAM(umask ARGS 022 OUTPUT_VARIABLE exec_out)
-    ELSE(NOT UMASK)
-        EXEC_PROGRAM(umask ARGS ${UMASK} OUTPUT_VARIABLE exec_out)
-    ENDIF(NOT UMASK)
-ENDIF(NOT WIN32)
+
+#---------------------------------------------------------------------
+# Coverage option
+OPTION_WITH_DEFAULT( SC_ENABLE_COVERAGE "Enable code coverage test" OFF )
+IF(SC_ENABLE_COVERAGE)
+  SET(SC_ENABLE_TESTING ON CACHE BOOL "Testing enabled by coverage option" FORCE)
+  # build static libs, better coverage report
+  SET(SC_BUILD_SHARED_LIBS OFF CACHE BOOL "Build shared libs" FORCE )
+  SET(SC_BUILD_STATIC_LIBS ON CACHE BOOL "Build static libs" FORCE )
+  SET(CMAKE_CXX_FLAGS_DEBUG "-O0 -g -fprofile-arcs -ftest-coverage" CACHE STRING "Extra compile flags required by code coverage" FORCE)
+  SET(CMAKE_C_FLAGS_DEBUG "-O0 -g -fprofile-arcs -ftest-coverage" CACHE STRING "Extra compile flags required by code coverage" FORCE)
+  SET(CMAKE_MODULE_LINKER_FLAGS_DEBUG "-fprofile-arcs -ftest-coverage" CACHE STRING "Extra linker flags required by code coverage" FORCE)
+  SET(SC_BUILD_TYPE "Debug" CACHE STRING "Build type required by testing framework" FORCE)
+  SET( SC_PYTHON_GENERATOR OFF ) #won't build with static libs
+ENDIF(SC_ENABLE_COVERAGE)
 
 #---------------------------------------------------------------------
 # Testing option
-OPTION( ENABLE_TESTING "Enable unittesting framework" OFF )
-IF(ENABLE_TESTING)
-    set( CMAKE_EXE_LINKER_FLAGS "-fprofile-arcs -ftest-coverage" ) #for code coverage
-    set( CMAKE_SHARED_LINKER_FLAGS "-fprofile-arcs -ftest-coverage" )
-    if( NOT DEFINED BUILD_SCHEMAS )
-        set( BUILD_SCHEMAS "ALL" ) #test all schemas, unless otherwise specified
-    endif()
-    INCLUDE(CTest)
-    ENABLE_TESTING()
-ENDIF(ENABLE_TESTING)
+OPTION_WITH_DEFAULT( SC_ENABLE_TESTING "Enable unittesting framework" OFF )
+IF(SC_ENABLE_TESTING)
+  if( NOT DEFINED SC_BUILD_SCHEMAS )
+    set( SC_BUILD_SCHEMAS "ALL" ) #test all schemas, unless otherwise specified
+  endif()
+  INCLUDE(CTest)
+  ENABLE_TESTING()
+ENDIF(SC_ENABLE_TESTING)
 
 #---------------------------------------------------------------------
-# The following logic is what allows binaries to run successfully in 
-# the build directory AND install directory.  Thanks to plplot for 
+# The following logic is what allows binaries to run successfully in
+# the build directory AND install directory.  Thanks to plplot for
 # identifying the necessity of setting CMAKE_INSTALL_NAME_DIR on OSX.
+# Documentation of these options is available at
+# http://www.cmake.org/Wiki/CMake_RPATH_handling
 
 # use, i.e. don't skip the full RPATH for the build tree
-SET(CMAKE_SKIP_BUILD_RPATH  FALSE)
+set(CMAKE_SKIP_BUILD_RPATH  FALSE)
 
 # when building, don't use the install RPATH already
 # (but later on when installing)
-SET(CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
+set(CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
 
 # the RPATH/INSTALL_NAME_DIR to be used when installing
 if (NOT APPLE)
-    SET(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
+  set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib:\$ORIGIN/../lib")
 endif(NOT APPLE)
-SET(CMAKE_INSTALL_NAME_DIR "${CMAKE_INSTALL_PREFIX}/lib")
+# On OSX, we need to set INSTALL_NAME_DIR instead of RPATH
+# http://www.cmake.org/cmake/help/cmake-2-8-docs.html#variable:CMAKE_INSTALL_NAME_DIR
+set(CMAKE_INSTALL_NAME_DIR "${CMAKE_INSTALL_PREFIX}/lib")
 
-# add the automatically determined parts of the RPATH which point to 
+# add the automatically determined parts of the RPATH which point to
 # directories outside the build tree to the install RPATH
-SET(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
-
+set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
 
 #-----------------------------------------------------------------------------
 # Output directories.
-IF(NOT CMAKE_LIBRARY_OUTPUT_DIRECTORY)
-    IF(WIN32)
-        SET(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${SCL_BINARY_DIR}/bin CACHE INTERNAL "Single output directory for building all libraries.")
-    ELSE(WIN32)
-        SET(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${SCL_BINARY_DIR}/lib CACHE INTERNAL "Single output directory for building all libraries.")
-    ENDIF(WIN32)
-ENDIF(NOT CMAKE_LIBRARY_OUTPUT_DIRECTORY)
-IF(NOT CMAKE_ARCHIVE_OUTPUT_DIRECTORY)
-    SET(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${SCL_BINARY_DIR}/lib CACHE INTERNAL "Single output directory for building all archives.")
-ENDIF(NOT CMAKE_ARCHIVE_OUTPUT_DIRECTORY)
-IF(NOT CMAKE_RUNTIME_OUTPUT_DIRECTORY)
-    SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${SCL_BINARY_DIR}/bin CACHE INTERNAL "Single output directory for building all executables.")
-ENDIF(NOT CMAKE_RUNTIME_OUTPUT_DIRECTORY)
+IF(NOT DEFINED CMAKE_LIBRARY_OUTPUT_DIRECTORY)
+  SET(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${SC_BINARY_DIR}/lib CACHE INTERNAL "Single output directory for building all libraries.")
+ENDIF(NOT DEFINED CMAKE_LIBRARY_OUTPUT_DIRECTORY)
+IF(NOT DEFINED CMAKE_ARCHIVE_OUTPUT_DIRECTORY)
+  SET(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${SC_BINARY_DIR}/lib CACHE INTERNAL "Single output directory for building all archives.")
+ENDIF(NOT DEFINED CMAKE_ARCHIVE_OUTPUT_DIRECTORY)
+IF(NOT DEFINED CMAKE_RUNTIME_OUTPUT_DIRECTORY)
+  SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${SC_BINARY_DIR}/bin CACHE INTERNAL "Single output directory for building all executables.")
+ENDIF(NOT DEFINED CMAKE_RUNTIME_OUTPUT_DIRECTORY)
 
 FOREACH(CFG_TYPE ${CMAKE_CONFIGURATION_TYPES})
-    STRING(TOUPPER "${CFG_TYPE}" CFG_TYPE)
-    IF(NOT "CMAKE_LIBRARY_OUTPUT_DIRECTORY_${CFG_TYPE}")
-        IF(WIN32)
-            SET("CMAKE_LIBRARY_OUTPUT_DIRECTORY_${CFG_TYPE}" ${SCL_BINARY_DIR}/bin CACHE INTERNAL "Single output directory for building all libraries.")
-        ELSE(WIN32)
-            SET("CMAKE_LIBRARY_OUTPUT_DIRECTORY_${CFG_TYPE}" ${SCL_BINARY_DIR}/lib CACHE INTERNAL "Single output directory for building all libraries.")
-        ENDIF(WIN32)
-    ENDIF(NOT "CMAKE_LIBRARY_OUTPUT_DIRECTORY_${CFG_TYPE}")
-    IF(NOT "CMAKE_ARCHIVE_OUTPUT_DIRECTORY_${CFG_TYPE}")
-        SET("CMAKE_ARCHIVE_OUTPUT_DIRECTORY_${CFG_TYPE}" ${SCL_BINARY_DIR}/lib CACHE INTERNAL "Single output directory for building all archives.")
-    ENDIF(NOT "CMAKE_ARCHIVE_OUTPUT_DIRECTORY_${CFG_TYPE}")
-    IF(NOT "CMAKE_RUNTIME_OUTPUT_DIRECTORY_${CFG_TYPE}")
-        SET("CMAKE_RUNTIME_OUTPUT_DIRECTORY_${CFG_TYPE}" ${SCL_BINARY_DIR}/bin CACHE INTERNAL "Single output directory for building all executables.")
-    ENDIF(NOT "CMAKE_RUNTIME_OUTPUT_DIRECTORY_${CFG_TYPE}")
+  STRING(TOUPPER "${CFG_TYPE}" CFG_TYPE)
+  IF(NOT "CMAKE_LIBRARY_OUTPUT_DIRECTORY_${CFG_TYPE}")
+    SET("CMAKE_LIBRARY_OUTPUT_DIRECTORY_${CFG_TYPE}" ${SC_BINARY_DIR}/lib CACHE INTERNAL "Single output directory for building all libraries.")
+  ENDIF(NOT "CMAKE_LIBRARY_OUTPUT_DIRECTORY_${CFG_TYPE}")
+  IF(NOT "CMAKE_ARCHIVE_OUTPUT_DIRECTORY_${CFG_TYPE}")
+    SET("CMAKE_ARCHIVE_OUTPUT_DIRECTORY_${CFG_TYPE}" ${SC_BINARY_DIR}/lib CACHE INTERNAL "Single output directory for building all archives.")
+  ENDIF(NOT "CMAKE_ARCHIVE_OUTPUT_DIRECTORY_${CFG_TYPE}")
+  IF(NOT "CMAKE_RUNTIME_OUTPUT_DIRECTORY_${CFG_TYPE}")
+    SET("CMAKE_RUNTIME_OUTPUT_DIRECTORY_${CFG_TYPE}" ${SC_BINARY_DIR}/bin CACHE INTERNAL "Single output directory for building all executables.")
+  ENDIF(NOT "CMAKE_RUNTIME_OUTPUT_DIRECTORY_${CFG_TYPE}")
 ENDFOREACH()
 
 
 #-----------------------------------------------------------------------------
-# Configure install locations. 
+# Configure install locations.
 
-# The location in which to install SCL. Need a good Debug location 
+# The location in which to install SC. Need a good Debug location
 # for Windows.  Only do this if CMAKE_INSTALL_PREFIX hasn't been set
 # already, to try and allow parent builds (if any) some control.
-IF(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT)
-    IF(NOT WIN32)
-        IF ("${CMAKE_BUILD_TYPE}" MATCHES "Release")
-            SET(CMAKE_INSTALL_PREFIX "/usr")
-        ELSEIF ("${CMAKE_BUILD_TYPE}" MATCHES "Debug")
-            SET(CMAKE_INSTALL_PREFIX "${SCL_SOURCE_DIR}/../scl-install")
-            MESSAGE("---  Setting debug install dir to ${CMAKE_INSTALL_PREFIX}")
-        ELSE("${CMAKE_BUILD_TYPE}" MATCHES "Release")
-            SET(CMAKE_INSTALL_PREFIX "/usr/local")
-        ENDIF ("${CMAKE_BUILD_TYPE}" MATCHES "Release")
-    ENDIF(NOT WIN32)
-    SET(CMAKE_INSTALL_PREFIX ${CMAKE_INSTALL_PREFIX} CACHE STRING "SCL install prefix" FORCE)
-    SET(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT 0)
-ENDIF(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT)
+if(NOT SC_IS_SUBBUILD)
+  IF(NOT WIN32)
+    IF (${CMAKE_BUILD_TYPE} MATCHES "Debug")
+      SET(SC_INSTALL_PREFIX "${SC_SOURCE_DIR}/../sc-install")
+    ELSE()
+      SET(SC_INSTALL_PREFIX "/usr/local")
+    ENDIF()
+  ENDIF(NOT WIN32)
+  SET( SC_INSTALL_PREFIX ${SC_INSTALL_PREFIX} CACHE
+    PATH "Install prefix prepended to target to create install location" )
+  SET( CMAKE_INSTALL_PREFIX ${SC_INSTALL_PREFIX} CACHE INTERNAL "Prefix prepended to install directories if target destination is not absolute, immutable" FORCE )
+endif(NOT SC_IS_SUBBUILD)
 
-OPTION(SCL-BUILD_EXPRESS_ONLY "Only build express parser." OFF)
-MARK_AS_ADVANCED(SCL-BUILD_EXPRESS_ONLY)
+OPTION(SC_BUILD_EXPRESS_ONLY "Only build express parser." OFF)
+MARK_AS_ADVANCED(SC_BUILD_EXPRESS_ONLY)
 
-# Take the scl config file template and copy it to the build directory so CMake
-# scripts can append to it if need be
-configure_file(${SCL_SOURCE_DIR}/include/scl_cf_cmake.h.in ${SCL_BINARY_DIR}/include/scl_cf.h.in COPYONLY)
-SET(CONFIG_H_FILE ${SCL_BINARY_DIR}/include/scl_cf.h.in)
+# Take the sc config file template as the starting point for
+# sc_cf.h.in - scripts may need to append to the template, so
+# it is read into memory initially.
+SET(CONFIG_H_FILE ${SC_BINARY_DIR}/include/sc_cf.h.in)
+set_source_files_properties(${CONFIG_H_FILE} PROPERTIES GENERATED TRUE)
+set(CMAKE_CURRENT_PROJECT SC)
+define_property(GLOBAL PROPERTY SC_CONFIG_H_CONTENTS BRIEF_DOCS "config.h.in contents" FULL_DOCS "config.h.in contents for SC project")
+if(NOT COMMAND CONFIG_H_APPEND)
+  macro(CONFIG_H_APPEND PROJECT_NAME NEW_CONTENTS)
+    if(PROJECT_NAME)
+      get_property(${PROJECT_NAME}_CONFIG_H_CONTENTS GLOBAL PROPERTY ${PROJECT_NAME}_CONFIG_H_CONTENTS)
+      set(${PROJECT_NAME}_CONFIG_H_FILE_CONTENTS "${${PROJECT_NAME}_CONFIG_H_CONTENTS}${NEW_CONTENTS}")
+      set_property(GLOBAL PROPERTY ${PROJECT_NAME}_CONFIG_H_CONTENTS "${${PROJECT_NAME}_CONFIG_H_FILE_CONTENTS}")
+    endif(PROJECT_NAME)
+  endmacro(CONFIG_H_APPEND NEW_CONTENTS)
+endif(NOT COMMAND CONFIG_H_APPEND)
+file(READ ${SC_SOURCE_DIR}/include/sc_cf_cmake.h.in CONFIG_H_FILE_CONTENTS)
+CONFIG_H_APPEND(SC "${CONFIG_H_FILE_CONTENTS}")
+
+# The Express parser uses the tools Perplex, RE2C and Lemon to generate code
+# from higher level inputs.  Depending on available tools and options, the
+# SC build can either re-generate code as part of the build, or use cached
+# files that are ready for compilation.
+#
+# SC_GENERATE_LEXER_PARSER is the "high level" control a user sets to determine
+# how the SC build will interact (or not) with these tools.  AUTO (the
+# default) means it will search for the necessary tools, and use them only if
+# everything is found.  If not, it will fall back to the cached versions.  If
+# this option is set to ON and the necessary tools are not found, the
+# configure step will fail.  If it is set to OFF, SC will not even try to use
+# the generators and will instead use the cached sources.
+if(NOT SC_GENERATE_LEXER_PARSER)
+  set(SC_GENERATE_LEXER_PARSER "AUTO" CACHE STRING "Use Perplex, RE2C and Lemon to generate C source code.")
+else(NOT SC_GENERATE_LEXER_PARSER)
+  string(TOUPPER "${SC_GENERATE_LEXER_PARSER}" SC_GENERATE_LEXER_PARSER)
+endif(NOT SC_GENERATE_LEXER_PARSER)
+set_property(CACHE SC_GENERATE_LEXER_PARSER PROPERTY STRINGS AUTO ON OFF)
+if (NOT "${SC_GENERATE_LEXER_PARSER}" STREQUAL "AUTO" AND NOT "${SC_GENERATE_LEXER_PARSER}" STREQUAL "ON" AND NOT "${SC_GENERATE_LEXER_PARSER}" STREQUAL "OFF")
+	message(WARNING "Unknown value ${SC_GENERATE_LEXER_PARSER} supplied for BRLCAD_WORD_SIZE - defaulting to AUTO")
+	message(WARNING "Valid options are AUTO, ON and OFF")
+	set(SC_GENERATE_LEXER_PARSER "AUTO" CACHE STRING "Use Perplex, RE2C and Lemon to generate C source code.")
+endif (NOT "${SC_GENERATE_LEXER_PARSER}" STREQUAL "AUTO" AND NOT "${SC_GENERATE_LEXER_PARSER}" STREQUAL "ON" AND NOT "${SC_GENERATE_LEXER_PARSER}" STREQUAL "OFF")
+
+# If the generators have not been turned off, we need to check for them
+if(NOT "${SC_GENERATE_LEXER_PARSER}" STREQUAL "OFF")
+	find_package(LEMON)
+	find_package(RE2C)
+	find_package(PERPLEX)
+	if(LEMON_EXECUTABLE AND LEMON_TEMPLATE AND PERPLEX_EXECUTABLE AND PERPLEX_TEMPLATE AND RE2C_EXECUTABLE)
+		# Templates may be anywhere - make sure we have a stable path if a relative
+		# path was specified at CMake time
+		get_filename_component(lemon_template_fpath "${LEMON_TEMPLATE}" ABSOLUTE)
+		if(NOT "${lemon_template_fpath}" STREQUAL "${LEMON_TEMPLATE}")
+			get_filename_component(LEMON_TEMPLATE "${CMAKE_BINARY_DIR}/${LEMON_TEMPLATE}" ABSOLUTE)
+		endif(NOT "${lemon_template_fpath}" STREQUAL "${LEMON_TEMPLATE}")
+		get_filename_component(perplex_template_fpath "${PERPLEX_TEMPLATE}" ABSOLUTE)
+		if(NOT "${perplex_template_fpath}" STREQUAL "${PERPLEX_TEMPLATE}")
+			get_filename_component(PERPLEX_TEMPLATE "${CMAKE_BINARY_DIR}/${PERPLEX_TEMPLATE}" ABSOLUTE)
+		endif(NOT "${perplex_template_fpath}" STREQUAL "${PERPLEX_TEMPLATE}")
+
+		if(NOT COMMAND LEMON_TARGET)
+			include(${SC_CMAKE_DIR}/LEMON_Util.cmake)
+		endif(NOT COMMAND LEMON_TARGET)
+		if(NOT COMMAND PERPLEX_TARGET)
+			include(${SC_CMAKE_DIR}/PERPLEX_Util.cmake)
+		endif(NOT COMMAND PERPLEX_TARGET)
+		set(SC_GENERATE_LP_SOURCES 1)
+	else(LEMON_EXECUTABLE AND LEMON_TEMPLATE AND PERPLEX_EXECUTABLE AND PERPLEX_TEMPLATE AND RE2C_EXECUTABLE)
+		if("${SC_GENERATE_LEXER_PARSER}" STREQUAL "ON")
+			message(FATAL_ERROR "\nSC_GENERATE_LEXER_PARSER set to ON, but one or more components of the Perplex/RE2C/Lemon toolchain were not found.\n")
+		else("${SC_GENERATE_LEXER_PARSER}" STREQUAL "ON")
+			set(SC_GENERATE_LP_SOURCES 0)
+		endif("${SC_GENERATE_LEXER_PARSER}" STREQUAL "ON")
+	endif(LEMON_EXECUTABLE AND LEMON_TEMPLATE AND PERPLEX_EXECUTABLE AND PERPLEX_TEMPLATE AND RE2C_EXECUTABLE)
+else(NOT "${SC_GENERATE_LEXER_PARSER}" STREQUAL "OFF")
+	set(SC_GENERATE_LP_SOURCES 0)
+endif(NOT "${SC_GENERATE_LEXER_PARSER}" STREQUAL "OFF")
 
 INCLUDE(CheckLibraryExists)
 INCLUDE(CheckIncludeFile)
 INCLUDE(CheckFunctionExists)
 INCLUDE(CheckTypeSize)
-INCLUDE(${SCL_CMAKE_DIR}/FindLEX.cmake)
-INCLUDE(${SCL_CMAKE_DIR}/FindYACC.cmake)
+INCLUDE(CMakePushCheckState)
+INCLUDE(CheckCXXSourceRuns)
 
 CHECK_INCLUDE_FILE(ndir.h HAVE_NDIR_H)
 CHECK_INCLUDE_FILE(stdarg.h HAVE_STDARG_H)
@@ -222,42 +324,65 @@ CHECK_FUNCTION_EXISTS(getopt HAVE_GETOPT)
 
 CHECK_TYPE_SIZE("ssize_t" SSIZE_T)
 
-# Now that all the tests are done, configure the scl_cf.h file:
-configure_file(${SCL_BINARY_DIR}/include/scl_cf.h.in ${SCL_BINARY_DIR}/include/scl_cf.h)
+set( TEST_STD_THREAD "
+#include <iostream>
+#include <thread>
+void do_work() {
+        std::cout << \"thread\" << std::endl;
+}
+int main() {
+        std::thread t(do_work);
+        t.join();
+}
+" )
+cmake_push_check_state()
+  if( UNIX )
+    set( CMAKE_REQUIRED_FLAGS "-pthread -std=c++0x" )
+  else( UNIX )
+    # vars probably need set for MSVC11, embarcadero, etc
+  endif( UNIX )
+  CHECK_CXX_SOURCE_RUNS( "${TEST_STD_THREAD}" HAVE_STD_THREAD )   #quotes are *required*!
+cmake_pop_check_state()
 
-################ create scl_version_string.h, http://stackoverflow.com/questions/3780667
-# Using 'ver_string' instead of 'scl_version_string.h' is a trick to force the
+# Now that all the tests are done, configure the sc_cf.h file:
+get_property(CONFIG_H_FILE_CONTENTS GLOBAL PROPERTY SC_CONFIG_H_CONTENTS)
+file(WRITE ${CONFIG_H_FILE} "${CONFIG_H_FILE_CONTENTS}")
+configure_file(${CONFIG_H_FILE} ${SC_BINARY_DIR}/include/sc_cf.h)
+
+################ create sc_version_string.h, http://stackoverflow.com/questions/3780667
+# Using 'ver_string' instead of 'sc_version_string.h' is a trick to force the
 # command to always execute when the custom target is built. It works because
 # a file by that name never exists.
-add_custom_target(version_string ALL
-                                 DEPENDS ver_string )
-# creates scl_version_string.h using cmake script
-add_custom_command(OUTPUT ver_string ${CMAKE_CURRENT_BINARY_DIR}/include/scl_version_string.h
-                   COMMAND ${CMAKE_COMMAND} -DSOURCE_DIR=${SCL_SOURCE_DIR}
-                                            -DBINARY_DIR=${SCL_BINARY_DIR}
-                                            -P ${SCL_CMAKE_DIR}/scl_version_string.cmake)
-# scl_version_string.h is a generated file
-set_source_files_properties(${CMAKE_CURRENT_BINARY_DIR}/include/scl_version_string.h
-    PROPERTIES GENERATED TRUE
-    HEADER_FILE_ONLY TRUE )
+configure_file(${SC_CMAKE_DIR}/sc_version_string.cmake ${SC_BINARY_DIR}/sc_version_string.cmake @ONLY)
+add_custom_target(version_string ALL DEPENDS ver_string )
+# creates sc_version_string.h using cmake script
+add_custom_command(OUTPUT ver_string ${CMAKE_CURRENT_BINARY_DIR}/include/sc_version_string.h
+                   COMMAND ${CMAKE_COMMAND} -DSOURCE_DIR=${SC_SOURCE_DIR}
+                                            -DBINARY_DIR=${SC_BINARY_DIR}
+                                            -P ${SC_BINARY_DIR}/sc_version_string.cmake)
+# sc_version_string.h is a generated file
+set_source_files_properties(${CMAKE_CURRENT_BINARY_DIR}/include/sc_version_string.h
+  PROPERTIES GENERATED TRUE
+  HEADER_FILE_ONLY TRUE )
 ################
 
 if(MSVC)
-# add_definitions( -Wall )
-add_definitions( -D__MSVC__ -D__WIN32__ )
-# Disable warning for preferred usage of secure functions (example strcpy should be strcpy_s, ...)
-add_definitions( -D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_WARNINGS )
+  # add_definitions( -Wall )
+  add_definitions( -D__MSVC__ -D__WIN32__ )
+  # Disable warning for preferred usage of secure functions (example strcpy should be strcpy_s, ...)
+  add_definitions( -D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_WARNINGS )
 elseif(BORLAND)
-add_definitions( -D__BORLAND__ -D__WIN32__ )
+  add_definitions( -D__BORLAND__ -D__WIN32__ )
 else()
-add_definitions( -pedantic -W -Wall -Wundef -Wfloat-equal -Wshadow -Winline -Wno-long-long )
+  add_definitions( -pedantic -W -Wall -Wundef -Wfloat-equal -Wshadow -Winline -Wno-long-long )
 endif()
 
 include_directories(
-    ${SCL_SOURCE_DIR}/include
-    ${SCL_BINARY_DIR}/include
-    )
+  ${SC_SOURCE_DIR}/include
+  ${SC_BINARY_DIR}/include
+  )
 
+ADD_SUBDIRECTORY(src/base)
 ADD_SUBDIRECTORY(src/express)
 ADD_SUBDIRECTORY(src/exppp)
 ADD_SUBDIRECTORY(src/fedex_plus)
@@ -266,13 +391,46 @@ ADD_SUBDIRECTORY(src/clstepcore)
 ADD_SUBDIRECTORY(src/cleditor)
 ADD_SUBDIRECTORY(src/cldai)
 ADD_SUBDIRECTORY(src/clutils)
+if(NOT WIN32)
+  ADD_SUBDIRECTORY(src/cllazyfile)
+endif(NOT WIN32)
 ADD_SUBDIRECTORY(include)
 ADD_SUBDIRECTORY(data)
-IF(ENABLE_TESTING)
-    ADD_SUBDIRECTORY( test )
-ENDIF(ENABLE_TESTING)
+IF(SC_ENABLE_TESTING)
+  ADD_SUBDIRECTORY( test )
+ENDIF(SC_ENABLE_TESTING)
 ADD_SUBDIRECTORY(doc)
 
 # this is for testing - 'make core' builds everything that isn't generated
 add_custom_target( core )
 add_dependencies( core stepdai check-express stepeditor fedex_plus )
+
+if(NOT SC_IS_SUBBUILD)
+  ###############################################################################
+  # SC Packaging                                                               #
+  # $make package                                                               #
+  ###############################################################################
+
+  SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY "STEPcode")
+  SET(CPACK_SET_DESTDIR "ON")
+
+  SET(CPACK_PACKAGE_VERSION_MAJOR ${SC_VERSION_MAJOR})
+  SET(CPACK_PACKAGE_VERSION_MINOR ${SC_VERSION_MINOR})
+  SET(CPACK_PACKAGE_NAME SC )
+
+  SET(CPACK_PACKAGE_CONTACT "SC Developers <scl-dev@googlegroups.com>")
+  INCLUDE(CPack)
+
+  ########################################################################################
+  # Uninstall code                                                                       #
+  # From http://www.cmake.org/Wiki/CMake_FAQ#Can_I_do_.22make_uninstall.22_with_CMake.3F #
+  # ######################################################################################
+  configure_file(
+    "${CMAKE_CURRENT_SOURCE_DIR}/cmake/cmake_uninstall.cmake.in"
+    "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
+    IMMEDIATE @ONLY)
+
+  add_custom_target(uninstall
+    COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake)
+
+endif(NOT SC_IS_SUBBUILD)

COPYING

@@ -2,7 +2,7 @@ Modifications to the original NIST code are (C)opyright by their
 respective authors. Unless otherwise specified, they are copyright
 on the date those changes were committed to whichever repository 
 they were committed to first (i.e. BRL-CAD on SourceForge.net, 
-mpictor/StepClassLibrary on github, etc).
+mpictor/StepClassLibrary or stepcode/stepcode on github).
 
 Modifications which were first commited to the repository on github
 are licensed under the 3-clause BSD license below. Changes committed

ChangeLog

@@ -1,5 +1,8 @@
 Recent changes are recorded in the publicly available repository:
-https://github.com/mpictor/StepClassLibrary
+http://github.com/stepcode/stepcode
+
+This repo was moved and renamed in May 2012. Previously, it was at
+http://github.com/mpictor/StepClassLibrary
 
 Some are duplicates of changes recorded in the BRL-CAD repo:
 http://brlcad.svn.sourceforge.net/viewvc/brlcad/brlcad/trunk/src/other/step/?view=log
@@ -7,7 +10,7 @@ http://brlcad.svn.sourceforge.net/viewvc/brlcad/brlcad/trunk/src/other/step/?vie
 Pre-BRL-CAD changes:
 ************************************************************************
  Updates from http://www.statik.tu-cottbus.de/fileadmin/project_dth/scl/
-			Jan 2005 - Mar 2006
+            Jan 2005 - Mar 2006
 ************************************************************************
  STEP Class Library Release 3.2 February 1998
 ************************************************************************

INSTALL

@@ -1,16 +1,15 @@
 INSTALL
 
-This file is contains installation instructions for the
-STEP Class Library.
+This file is contains installation instructions for STEPcode.
 
 These installation requires that you have the following software
 available:
 
 - C and C++ compilers    (Tested with GCC, MSVC, Embarcadero)
-- bison, byacc, or yacc  (only bison has been tested recently)
-- flex or lex            (only flex has been tested recently)
-- CMake
+- CMake                  (v2.8.7 or greater)
 - mingw                  (only on Windows)
+- a lexer and parser (i.e. flex, bison) are NOT necessary anymore
+  -if you modify the lexer or parser, you will need LEMON, RE2C, PERPLEX from BRL-CAD
 
 --------------------
 Installation
@@ -21,16 +20,16 @@ Installation
 * Build system uses CMake now: configure, Makefile, and all
   autotools files have been removed, as has mkProbe.
 
-* Building SCL from the command prompt:
-  - cd scl
+* Building SC from the command prompt:
+  - cd sc
   - mkdir build
   - cd build
   - cmake ..
   - make
   - make install       #  optional
 
-* Building SCL from the GUI:
-  - Run cmake-gui, set it to build in scl/build
+* Building SC from the GUI:
+  - Run cmake-gui, set it to build in sc/build
   - Select the correct build file generator
   - Press Configure
   - Change options as necessary, configuring again afterwards
@@ -39,7 +38,7 @@ Installation
   - Open the main build file using your preferred build tool
 
 * Build options (append to the 'cmake ..' line):
-  -DBUILD_SCHEMAS="path/to/schema.exp;path/to/schema2.exp"
+  -DSC_BUILD_SCHEMAS="path/to/schema.exp;path/to/schema2.exp"
     - this generates c++ for the schema, and compiles it into a
       library. Also works with directories, as long as each dir only
       has one express file.
@@ -48,23 +47,23 @@ Installation
       and writes another. It may change whitespace or remove comments;
       otherwise, the input and output files should be identical. If
       they are not identical, either the file does not match the
-      schema, or SCL generated incorrect source code.
-  -DBUILD_SCHEMAS=ALL
-    - Added to make use of ctest easier. If BUILD_SCHEMAS == ALL,
+      schema, or SC generated incorrect source code.
+  -DSC_BUILD_SCHEMAS=ALL
+    - Added to make use of ctest easier. If SC_BUILD_SCHEMAS == ALL,
       then CMake adds each *.exp file found in data/.
-  -DCMAKE_BUILD_TYPE=Release
+  -DSC_BUILD_TYPE=Release
     - this causes binaries to be built without debugging information
     - without this, cmake defaults to a Debug build
 
-* Using CTest to test SCL:
+* Using CTest to test SC:
   - Read the comments in run_ctest.cmake
-  - (OPTIONAL) Create scl/../.SCL_CTEST_PREFS.cmake, and set variables
+  - (OPTIONAL) Create sc/../.SC_CTEST_PREFS.cmake, and set variables
     in it (this file is required for CDash submission to be enabled)
   - Run tests with `ctest -S run_ctest.cmake`
 
-* Using CTest to regenerate the schema matrix on the github SCL wiki:
+* Using CTest to regenerate the schema matrix on the github SC wiki:
   - Requires:
      - git
      - python
-     - a clone of the git repo for the wiki at scl/../wiki-scl
+     - a clone of the git repo for the wiki at sc/../wiki-sc
   - run `ctest -S ctest_matrix.cmake`

NEWS

@@ -1,4 +1,37 @@
-STEP Class Library  ------  http://github.com/mpictor/StepClassLibrary
+STEPcode -- http://github.com/stepcode/stepcode -- http://stepcode.org
+************************************************************************
+Release 0.7 (April, 2013)
+
+New since v0.6:
+* Requires CMake 2.8.7 or later
+* Replace *ALL* references to SCL with SC - CMake, source, filenames.
+* Lazy loading code (src/cllazyfile)
+  * greatly reduces memory requirements and loading time when not all
+  instances are needed
+  * doesn't work with complex instances yet
+  * doesn't work on windows or 32-bit platforms yet
+* Merged all BRL-CAD changes; now, we can work on the same repo.
+  * Eliminate compile-time dependency on a lexer and parser
+  * When lexer/parser changes, use LEMON/RE2C/Perplex (in BRL-CAD repo)
+* Fixed several bugs in the class libraries that cause segfaults
+* update AP209, 210e3, 242, IFC2
+* Fixes for MSVC, Embarcadero (there are still problems with both:
+  see comments on #178 & #190, also import/export macros)
+* Fixed NIST test executables
+************************************************************************
+Release 0.6 (May, 2012)
+
+New since v0.5:
+* Renamed from STEP Class Library to STEPcode, moved to github.com/stepcode/stepcode
+* Advances in [Python](http://github.com/stepcode/stepcode/wiki/python-generator) support (#185)
+* ABI versioning
+* Implement memory manager with reporting of memory that isn't freed,
+  fix many memory leaks (#148, #160, #162, #168)
+* MSVC fixes (> 128 nested if...else - #152), etc
+* Add AP219, AP238, PDM schema, AP203a1, syntax highlighting files
+* Improvements to CMake files, mostly from Cliff @ BRL-CAD (#143, #163, #181)
+* Allow runtime bounds for aggregates (discovered with AP209e2) (#166)
+* fedex_plus fprintf's can be traced with -DSCL_TRACE_FPRINTF=ON (#176)
 ************************************************************************
 Release 0.5 (Feb 23, 2012)
 
@@ -8,7 +41,7 @@ New since v0.4:
 * Now handles most features of EXPRESS - all included schemas,
   with the exception of AP209 CD, are parsed without error. Enums are
   now in their own dictionary. Allow indexing on aggregates, generics,
-  and binaries. 
+  and binaries.
 * Changes to fedex_plus that improve the generated c++ - use a
   namespace, break up large static strings, make EXPRESS multiple
   inheritance work by not printing multiple copies of inherited members.
@@ -28,7 +61,7 @@ New since v0.3:
 * Enums and entities are allowed to have the same names
   (affected ap242,210e3,209)
 * Remove the SCLP23 macro
-http://github.com/mpictor/StepClassLibrary/wiki/changelog-v0.4
+http://github.com/stepcode/stepcode/wiki/changelog-v0.4
 ************************************************************************
 
 Release 0.3 (Oct 29, 2011)
@@ -58,10 +91,10 @@ What's new since v0.1?
 * Add BNF files, schemas, and CAX-IF Part 21 files
 
 For a detailed list of changes, see
-https://github.com/mpictor/StepClassLibrary/wiki/changelog-v0.2
+https://github.com/stepcode/stepcode/wiki/changelog-v0.2
 
 For a list of closed issues, see
-https://github.com/mpictor/StepClassLibrary/issues?state=closed&milestone=2
+https://github.com/stepcode/stepcode/issues?state=closed&milestone=2
 
 ************************************************************************
 
@@ -84,10 +117,10 @@ What's new since the SCL 3.2 release in 1998?
   parser debug output to a specified range of lines in the schema.
 
 For a detailed list of changes, see
-https://github.com/mpictor/StepClassLibrary/wiki/changelog-v0.1
+https://github.com/stepcode/stepcode/wiki/changelog-v0.1
 
 For a list of closed issues, see
-https://github.com/mpictor/StepClassLibrary/issues?state=closed&milestone=1
+https://github.com/stepcode/stepcode/issues?state=closed&milestone=1
 
 Pre-BRL-CAD changes:
 * Patches from http://www.statik.tu-cottbus.de/fileadmin/project_dth/scl/
@@ -176,7 +209,7 @@ types, entities, and attributes.
 - Fixed a bug in the casting functions for the classes handling
 instances of SELECT TYPEs in EXPRESS.
 e.g.
-SdaiMeasure_value::operator SCLP23(Real)()
+SdaiMeasure_value::operator SDAI_Real)(
 {
 // was missing stmts such as these...
    if( CurrentUnderlyingType () == config_control_designt_area_measure )
@@ -293,10 +326,10 @@ classes is what allows for the flexibility in dealing with problem
 areas when using SCL with other software.
 
 An example of a name change and macro use: sdaiString has now become
-SCLP23(String) which could translate to SDAI::String or SDAI_String
+SDAI_String which could translate to SDAI::String or SDAI_String
 (depending on whether you use the SDAI namespace or not) or any other
 namespace or prefix as is necessary. To change the SDAI namespace name
-or prefix name the macro definition for SCLP23() could be changed in
+or prefix name the macro definition for SDAI_ could be changed in
 the sclprefixes.h file.
 
 The early bound access functions that are generated by fedex_plus from

README

@@ -1,32 +1,34 @@
 ***********************************************************************
-Step Class Library v0.5 -- http://github.com/mpictor/StepClassLibrary
+STEPcode v0.7 -- stepcode.org, github.com/stepcode/stepcode
 
-* What is SCL? SCL reads ISO10303-11 EXPRESS schemas and generates
+* What is STEPcode? SC reads ISO10303-11 EXPRESS schemas and generates
   C++ source code that can read and write Part 21 files conforming
-  to that schema. In addition to C++, v0.5 includes experimental
+  to that schema. In addition to C++, SC includes experimental
   support for Python.
- 
-* SCL is packaged along with some other tools. See 
-  "THE NIST STEP TOOLSET", below. In particular, Data Probe
-  requires InterViews, an obsolete UI toolkit. I (mpictor) have not
-  had luck building the data probe with it. It may be more productive
-  to replace InterViews with a modern toolkit such as Qt. I
-  expect that this would be non-trivial.
 
-* Much of the work to update SCL has been done by the developers of
-  BRL-CAD, and SCL was originally created at NIST in the 90's.
+* Renamed in April/May 2012: SC was formerly known as STEP Class
+  Libraries, SCL for short. It was renamed because the name wasn't
+  accurate: the class libraries make up only a part of the code.
+
+* Much of the work to update SC has been done by the developers of
+  BRL-CAD, and SC (then STEP Class Library) was originally created at
+  NIST in the 90's.
+
+* For information on changes version-by-version, see the NEWS file
 
-* Build system uses only CMake now: configure, Makefile, and all
-  autotools files have been removed, as has mkProbe.
-  
 * Building and testing SCL - see the INSTALL file
 
+* For more details on the libraries and executables, see the wiki:
+  http://github.com/stepcode/stepcode/wiki/About-STEPcode
+
+* For license details, see the COPYING file. Summary: 3-clause BSD.
+
 ***********************************************************************
 
 ***********************************************************************
 CODING STANDARDS
 
-SCL's source has been reformatted with astyle. When making changes, try
+SC's source has been reformatted with astyle. When making changes, try
 to match the current formatting. The main points are:
 
   - compact (java-style) brackets:
@@ -47,547 +49,9 @@ to match the current formatting. The main points are:
     (see http://www.stack.nl/~dimitri/doxygen/docblocks.html)
 
 If in doubt about a large patch, run astyle with the config file
-misc/astyle.cfg. 
+misc/astyle.cfg.
 Download astyle from http://sourceforge.net/projects/astyle/files/astyle/
 
 ***********************************************************************
 
-
-***********************************************************************
-Notes/TODO items specific to the STEP libraries as included in BRL-CAD:
-
-* Original build system has been replaced with Makefile.am and
-  configure.ac files in the style of BRL-CAD's autotools build
-  system.
-
-* Changes have been made to src/express to get it compiling with
-  the output of different versions of lex/flex/bison.  These
-  changes are not yet tested in terms of impact on functionality
-  and should be a starting point for any debugging of EXPRESS
-  parsing issues.
-
-* Of the original test code, only p21read has been incorporated into
-  the new build system, but they are still present in src/test
-
-* Express and exppp header files have been relocated to subdirectories
-  in include.  The names of the library files being built have been
-  altered, and clstepcore and cleditor now build as separate libraries.
-
-* Numerous minor changes have been made, mostly including stdlib
-  and other required files.
-
-***********************************************************************
-
-
-=====================================================
-Much has changed since README.scl was written.
-However, it is reproduced in its entirety below.
-=====================================================
-
-README.scl (top level README) February 1998
-
-THE NIST STEP TOOLSET
-=====================
-
-Included in this release of the NIST STEP Toolset are 
-
-	STEP Class Library (SCL)
-	fedex_plus
-	fedex_idl
-	fedex_os
-	Data Probe application
-	Part 21 Reader application
-	mkProbe script
-	NIST EXPRESS Toolkit
-	NIST EXPRESS Pretty Printing Toolkit
-
-The focus of our work since our last release has been on developing a
-reference implementation of the binding of EXPRESS to C++ and IDL as
-specified by STEP's Parts 23 and 26 respectively.  To this we have
-added a persistence capability (based on the ObjectStore OODB from
-Object Design, Inc) and a distribution capability (based on Orbix by
-Iona Technologies, Ltd).  We also experimented with the Open OODB from
-Texas Instruments and with DSOM from IBM.
-
-The STEP Class Library (SCL) and fedex_plus are used to build
-STEP-related applications in C++.  They support STEP Parts 21 (the
-exchange file format), 22 (the functional specification of STEP's
-Standard Data Access Interface, SDAI), 23 (the C++ binding to SDAI),
-and 26 (the IDL interface to SDAI).  fedex_plus is an application of
-the NIST EXPRESS Toolkit (based on STEP Part 11) which generates a C++
-class library representation of an EXPRESS schema based on STEP's Part
-23.  The generated classes work with the STEP Class Library.  The NIST
-EXPRESS Pretty Printing Toolkit is used to format and output EXPRESS.
-fedex_os is used to generate software (in addition to fedex_plus)
-needed to use SCL with the ObjectStore OODB. fedex_idl translates
-EXPRESS to the Interface Definition Language (according to Part 26) 
-for use with Orbix.
-
-The Data Probe software and mkProbe script are used to generate
-schema-specific class libraries (a.k.a. "Schema Class Library"), Data
-Probe editors, and Part 21 file readers.  mkProbe generates a C++
-library representing a schema (using fedex_plus) and links the schema
-library with other libraries of the SCL and Data Probe to create a
-schema specific editor, known as a Data Probe.  The Data Probe is a
-graphical editor for STEP data; it is used to browse and edit data
-instances of the objects in an EXPRESS model.  It may also be used to
-visually browse the objects contained in the EXPRESS schema itself.
-Data Probes are X Windows-based and use the InterViews Toolkit from
-Stanford University.
-
-The Data Probe source code was designed with reusability in mind.  The
-runtime-code uses three class libraries: the STEP Class Library
-(developed at NIST), the InterViews Toolkit (user interface
-developer's toolkit from Stanford), and a standard C++ Class Library.
-The NIST STEP Class Library is divided into component libraries
-including STEP Core, Editor, Utilities, Data Access Interface,
-Interviews extensions, and Probe.  The STEP Core, Editor, and Utils
-libraries can be used without the user interface libraries (Interviews
-extensions and Probe) for applications needing to represent the
-EXPRESS data structures.  At this point the Data Access Interface is a
-partial implementation of SDAI's Session schema.
-
-Dependencies between these modules have been minimized so that an
-executable program, the Data Probe, can be easily reconfigured to
-support different conceptual schemas.
-
-We have experimented with replacing the Interviews-based interface
-with a tcl interface with good success; however, it is not in our work
-plan to complete.  If anyone is interested in extending the toolkit
-with a more modern interface, we would be glad to discuss it with you.
-
-The Part 21 Reader was originally developed to test whether a Schema
-Class built and linked without problems.  It is also useful for
-checking Part 21 files.  It displays the error messages from the STEP
-Class Library as a file is read.
-
-
-SYSTEM REQUIREMENTS
-===================
-
-Depending on how you want to use the toolkit, additional pieces of
-software will need to be available on your local system:
-
-  - UNIX SunOS 4.1.x or Solaris 5.x operating system.
-        At NIST, the SCL including the Data Probe has been built on
-        SunOS workstations.  The SCL without the Data Probe has been
-        built on Solaris.  (We did not build the InterViews Library
-        on Solaris.)  NOTE: earlier versions of the SCL 2.1 without
-        the Data Probe had been ported to AIX, HP, linux, and Windows NT.
-
-  - a C++ compiler -- cfront version 2.1 or higher
-
-	NOTE: The current SCL release has been built with SUN C/C++,
-	and GNU's gcc/g++ compilers.  Earlier versions of the SCL were
-	built using CenterLine on SunOS and CSet++ on AIX.
-
-	If you successfully port the current version to other
-	compilers and/or operating systems (and are willing to share)
-	please contact us (stepcl@cme.nist.gov) so that we can point
-        others to it.
-
-  - The NIST EXPRESS Toolkit -- available from NIST
-	Included in this release; also available as:
-	ftp.cme.nist.gov:pub/step/npttools/exptk.tar.Z
-
-  - The NIST EXPRESS Pretty Printer -- available from NIST
-	Included in this release; also available as:
-	ftp.cme.nist.gov:pub/step/npttools/exppp.tar.Z
-
-The following components are optional:
-
-  - Version 3.1 of the InterViews Toolkit from Stanford.  
-	ftp://interviews.stanford.edu:pub/3.1.tar.Z
-
-        NOTE: InterViews is only needed for the Data Probe portion of
-	the toolkit.  The STEP Class Library without the Data Probe
-	and InterViews has been built on more platforms than with these
-	components.
-
-  - Orbix version 2.0.  Available from Iona Technologies:
-http://www.iona.com 
-
-  - Object Store version 4.  Available from Object Design Inc.:
-http://www.odi.com. 
-
-
-INSTALLATION INSTRUCTIONS
-=========================
-
-Refer to the file INSTALL.  
-
-In the instructions below, you will see references to the directory
-<ARCH_DIR>.  This directory name should be interpreted as the directory
-which is named to reflect your compiler and/or system architecture
-when installing the SCL using configure: i.e. "arch.centerline" or
-"arch-gnu.solaris"
-
-
-CREATING A NEW SCHEMA CLASS LIBRARY AND/OR DATA PROBE
-=====================================================
-
-The <ARCH_DIR>/bin/mkProbe script automates the process of building
-new Schema Class Libraries and Data Probe executables.  When run with
-the -l option only the Schema Class Library will be created.  See man
-page in ~scl/man.
-
-Examples
-					
-     Input command line			output (name and location)
-     ----------------------------------------------------
-     mkProbe part41.exp pt41		./pt41/dp_pt41
-
-     mkProbe -i part101.exp dp          ~scl/<ARCH_DIR>/Probes/dp/dp_dp
-
-     mkProbe -l example.exp example	./example/libCexample.a
-
-     mkProbe -p example.exp example	./example/p21read_example
-
-
-CONTENTS
-========
-
-This directory contains the following files and subdirectories.  
-
-This software release includes all the NIST software needed for
-creating new versions of the Data Probe program.  Two example schemas
-are included in the data directory.
-
-INSTALL 	- File discussing installation of SCL.
-
-README.scl	- This file.
-
-src/test/README	- README discussing SCL coding examples under src/test/
-
-disclaim.txt	- NIST disclaimer for this distribution.
-
-build-apps.txt	- Discusses how to build applications using the STEP
-		  Class Library.
-
-whatsnew.3-1.txt- Discusses new features in the STEP Class Library and
-		  Data Probe 3.1 release.
-
-whatsnew.2-1.txt- This was the `whatsnew' file released with SCL 2.1.
-		  Most of the information is still relevant.
-
-configure	- Script used to install the SCL.
-
-configure.in	- File used to create the configure script using gnu's
-		  autoconf software.
-
-configure.files_notes.txt - Discusses various files used by the
-		  configure script.
-
-Makefile        - Contains a default rule to build SCL using the
-		  configure installation script.
-
-<ARCH_DIR>/bin/mkProbe - Script used to generate a new Schema Class Library
-		  and/or Data Probe executable.
-		  (see CREATING A NEW SCHEMA CLASS LIBRARY AND/OR DATA PROBE)
-
-config/		- Directory containing various templates needed by the
-		  configure installation script.
-
-config/examples/ - Directory containing examples of using configure to
-		  install SCL.
-
-arch_template/	- Directory containing templates used by configure to
-		  create an architecture specific SCL installation.
-
-src/		- Source code files for the C++ libraries included in this 
-		  release.
-
-src/cl*		- Directories containing the source code for the C++
-		  libraries in the STEP Class Library.  These
-		  libraries are documented in the VTS Design document
-		  (see DOCUMENTATION below). They are as follows:
-
-	src/clutils	- utilities needed by the other libraries.
-
-	src/clstepcore	- "core" classes representing EXPRESS types
-			  and dictionary info.
-
-	src/cldai       - classes for a partial implementation of the
-			  Session schema of STEP's Standard Data
-			  Access Interface (STEP Part 23). 
-
-	src/cleditor	- classes for managing data instances and 
-			  exchange files.
-
-	src/clivfasd	- customizations to the Interviews class
-			  library.
-
-	src/clprobe-ui	- user interface classes for the Data Probe.
-
-	src/clSchemas 	- Contain subdirectories with schema specific source
-			  code generated by the mkProbe script.
-
-src/express	- Directory containing the EXPRESS Toolkit.
-
-src/exppp	- Directory containing EXPRESS Pretty Printer Toolkit.
-
-src/test	- Directory containing example STEP Class Library 
-		  applications.
-
-src/fedex_plus	- Directory containing source code and makefile for 
-		  fedex_plus, fedex_idl, fedex_os
-
-<ARCH_DIR>
-
-		- <ARCH_DIR> is the installer-supplied name of the 
-		  directory which is created when you run configure to
-		  install SCL. (See the file INSTALL for more
-		  information.)  This directory contains computer
-		  architecture-specific files. Additional arch dirs
-		  may be created to support multiple platforms or C++
-		  compilers which all refer to the same source
-		  code under src/. The arch dir contains the subdirectories
-		  ofiles, bin, lib, and Probes.
-
-<ARCH_DIR>/ofiles/ - Directory containing object (.o) files for SCL.
-
-<ARCH_DIR>/ofiles/sdaiOrbix - Directory containing IDL files and
-		  Makefile needed to build and use SCL with Orbix.
-
-<ARCH_DIR>/lib/	- Directory containing library (.a) files for SCL.
-
-<ARCH_DIR>/Probes/  - The <ARCH_DIR>/Probes directory will contain
-		  directories for versions of the Schema Class Library
-		  and Data Probe generated using the mkProbe script
-		  with the -i option. 
-
-<ARCH_DIR>/bin/	- The fedex, fedex_plus, fedex_idl, and fedex_os,
-		  exppp, and symlink executables and mkProbe,
-		  sclbuild, and setup-arch scripts are placed in this
-		  directory during installation.
-
-data/		- Directory containing sample EXPRESS files to use to
-		  create SCL applications such as the Data Probe or
-		  Part 21 Reader.  Also contains data for some of the
-		  examples. 
-
-bin/		- Directory containing various scripts.
-
-man/ 		- Directory containing man pages for the software in
-		  the release.  You may look at the man page by
-		  issuing the command: nroff -man <manpagefile> or by
-		  adding this directory to your MANPATH.
-
-
-EXAMPLES
-========
-
-Example of creating a Data Probe
---------------------------------
-
-To create a new version of the Data Probe run the script mkProbe.  For
-example, to create a Data Probe based on the "example_schema" EXPRESS
-schema included in this release, issue the following command in a
-directory from which you would like a subdirectory containing the new
-Data Probe to be created:
-
-% mkProbe ~scl/data/example/example.exp example
-
-This command creates a new version of the Data Probe in the file:
-
-% ./example/dp_example
-
-(It also creates subdirectory example/ if it does not exist already.)
-
-
-Examples of using the STEP Class Library
-----------------------------------------
-
-To use the Schema Class Library source code (without the Data Probe
-software) refer to the examples in the directory src/test.
-
-Example of a Part 21 file reader
---------------------------------
-
-To create a file reader based on STEP's Part 21 format use the mkProbe
-script with the -p option.
-
-% mkProbe -p ~scl/data/example/example.exp example
-
-The executable p21read_example is created.  Run it as follows:
-
-% p21read_example your_part_21_file
-
-This program reads a file the name of which is supplied as an
-argument to the program.  Any errors encountered when reading the file
-are reported to standard output.  A summary of the file is also
-reported.  The file is then written back out to a file the name of
-which may be supplied as the second argument to the program.  If no
-name is given, "file.out" is used. 
-
-
-FOR MORE INFORMATION
-====================
-
-SCL HOME PAGE
--------------
-
-The SCL home page is located on the world wide web at,
-
-http://www.nist.gov/scl
-
-The SCL home page will provide important, up-to-date information on
-the status of the SCL, new developments and fixes, links to related
-software and projects, and may eventually contain an FAQ sheet.
-
-SCL DOCUMENTATION
------------------
-
-Documentation can be accessed from the SCL world wide web home page
-located at http://www.nist.gov/scl 
-The following files (in postscript format) are particularly relevant:
-
-Design of a C++ Software Library for Implementing EXPRESS: The NIST
-	STEP Class Library
-
-Data Probe User's Guide
-
-Data Probe: A Tool for EXPRESS-based Data
-
-Architecture for the Validation Testing System Software
-
-Validation Testing System Software Reusable Software Component Design
-
-Diagrams of basic SCL data structures
-
-
-ISO DOCUMENTATION
------------------
-
-Copies of the International Standard documents (including STEP Part 11
-the EXPRESS Language Reference Manual, Part 21 the STEP Exchange File
-Format, Part 22 STEP's Standard Data Access Interface, and Part 23 the
-C++ language binding to SDAI) can be ordered from the ISO
-International Organization of Standardization or your national
-body. The United States distribution is managed by the US Product Data
-Exchange Association at:
-
-U.S. Product Data Association  (USPro)
-Trident Research Center, Suite 204
-5300 International Blvd.
-N. Charleston, SC 29418
-
-http://www.uspro.scra.org
-uspro@scra.org
-Ph: 803-760-3327
-FAX: 803-760-3349
-
-MAILING LIST
-------------
-
-Announcements of new releases or bug fixes will also be sent to the
-mailing list scl@cme.nist.gov.  To be added to the scl mailing list
-send a request to majordomo@cme.nist.gov.  Include in the body of the
-message:
-
-	subscribe scl
-
-For additional help, include in the body of the message:
-
-	help
-
-If you use a signature within your email, end your majordomo
-command sequence with the word "end".  For example,
-
-	subscribe scl
-	end
-
-
-REPORTING PROBLEMS AND SUGGESTIONS
-==================================
-
-We would like feedback on all parts of the software.  Please let us
-know if you
-
-  - have problems following the instructions in the README file,
-  - have problems installing the software, 
-  - have problems compiling your own valid EXPRESS schema, or
-  - have suggestions for improvements to the software.
-  - really like the software :)
-
-Send your comments to 
-	
-	stepcl@cme.nist.gov
-
-(For users of version 2, note the new mailing address of "stepcl...".)
-
-Questions about availability or accessing the software should be
-directed to the SOLIS administrator
-
-Gaylen Rinaudot
-npt-info@cme.nist.gov
-301-975-3386
-
-ACKNOWLEDGMENTS
-===============
-
-The STEP Class Library (SCL) was developed by the Manufacturing
-Systems Integration Division at the National Institute of Standards
-and Technology (http://www.mel/nist.gov/msid) to support testing of
-the Standard for the Exchange of Product Model Data (a.k.a STEP) and
-validation of STEP's emerging implementation specifications.  Funding
-for the project has come from the U.S. Department of Commerce, and the
-Department of Defense agencies including the Office of the Defense
-CALS (Continuous Acquisition and Life-Cycle Support) Executive and the
-Defense Advanced Research Projects Agency (DARPA).  Recent
-enhancements were sponsored by the National Industrial Information
-Infrastructure Consortium (NIIIP) (http://www.niiip.org) and the NAMT
-Framework project
-(http://www.mel.nist.gov/msid/projs/97projs/framewrk.htm) of NIST's
-Systems Integration for Manufacturing Applications (SIMA) program
-(http://www.mel.nist.gov/msid/sima/sima.htm).
-
-LICENSING RESTRICTIONS and DISCLAIMERS
-======================================
-
-This software was produced by the National Institute of Standards and
-Technology (NIST), an agency of the U.S. government, and by statute
-is not subject to copyright in the United States.  Recipients of this
-software assume all responsibility associated with its operation,
-modification, maintenance, and subsequent re-distribution.
-
-There is no warranty for the NIST STEP Toolkit.
-If the NIST STEP Toolkit is modified by someone else and passed on,
-NIST wants the Toolkit's recipients to know that what they have is not
-what NIST originally distributed.
-
-Distribution Rights
-1. Anyone may copy and distribute verbatim copies of the NIST STEP Toolkit
-   source code as received in any medium.
-
-2. Anyone may modify their copy or copies of the NIST STEP Toolkit source
-   code or any portion of it, and copy and distribute such modifications
-   provided that all modifications are clearly associated with the entity
-   that performs the modifications.
-
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!DISCLAIMERS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-Names of companies and products are provided in order to adequately
-specify procedures and equipment used.  In no case does such
-identification imply recommendation or endorsement by the National
-Institute of Standards and Technology, nor does it imply that the
-products are necessarily the best available for the purpose.
-
-NO WARRANTY
-===========
-
-NIST PROVIDES ABSOLUTELY NO WARRANTY.  THE NIST STEP TOOLKIT
-IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
-EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS
-WITH YOU.  SHOULD ANY PORTION OF THE NIST STEP TOOLKIT PROVE DEFECTIVE,
-YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.
-
-IN NO EVENT WILL NIST BE LIABLE FOR DAMAGES, INCLUDING ANY LOST
-PROFITS, LOST MONIES, OR OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL
-DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE (INCLUDING BUT NOT
-LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE, OR LOSSES
-SUSTAINED BY THIRD PARTIES, OR A FAILURE OF THE PROGRAM TO OPERATE
-WITH PROGRAMS NOT DISTRIBUTED BY NIST) THE PROGRAMS, EVEN IF YOU HAVE
-BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY
-ANY OTHER PARTY.
+For more info, see the wiki.

SCL_VERSION.txt

@@ -1 +0,0 @@
-0.5

SC_VERSION.txt

@@ -0,0 +1 @@
+0.7

cmake/FindLEMON.cmake

@@ -0,0 +1,74 @@
+#
+# - Find lemon executable and provides macros to generate custom build rules
+# The module defines the following variables
+#
+#  LEMON_EXECUTABLE - path to the lemon program
+#  LEMON_TEMPLATE - location of the lemon template file
+
+#=============================================================================
+#                 F I N D L E M O N . C M A K E
+#
+# Originally based off of FindBISON.cmake from Kitware's CMake distribution
+#
+# Copyright (c) 2010-2012 United States Government as represented by
+#                the U.S. Army Research Laboratory.
+# Copyright 2009 Kitware, Inc.
+# Copyright 2006 Tristan Carel
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#  
+# * Redistributions of source code must retain the above copyright
+#   notice, this list of conditions and the following disclaimer.
+# 
+# * Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in the
+#   documentation and/or other materials provided with the distribution.
+# 
+# * The names of the authors may not be used to endorse or promote
+#   products derived from this software without specific prior written
+#   permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#=============================================================================
+
+find_program(LEMON_EXECUTABLE lemon DOC "path to the lemon executable")
+mark_as_advanced(LEMON_EXECUTABLE)
+
+if(LEMON_EXECUTABLE AND NOT LEMON_TEMPLATE)
+  get_filename_component(lemon_path ${LEMON_EXECUTABLE} PATH)
+  if(lemon_path)
+    set(LEMON_TEMPLATE "")
+    if(EXISTS ${lemon_path}/lempar.c)
+      set(LEMON_TEMPLATE "${lemon_path}/lempar.c")
+    endif(EXISTS ${lemon_path}/lempar.c)
+    if(EXISTS /usr/share/lemon/lempar.c)
+      set(LEMON_TEMPLATE "/usr/share/lemon/lempar.c")
+    endif(EXISTS /usr/share/lemon/lempar.c)
+  endif(lemon_path)
+endif(LEMON_EXECUTABLE AND NOT LEMON_TEMPLATE)
+include(FindPackageHandleStandardArgs)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(LEMON DEFAULT_MSG LEMON_EXECUTABLE LEMON_TEMPLATE)
+mark_as_advanced(LEMON_TEMPLATE)
+
+#============================================================
+# FindLEMON.cmake ends here
+
+# Local Variables:
+# tab-width: 8
+# mode: cmake
+# indent-tabs-mode: t
+# End:
+# ex: shiftwidth=2 tabstop=8

cmake/FindLEX.cmake

@@ -1,164 +0,0 @@
-# - Find lex executable and provides a macro to generate custom build rules
-#
-# The module defines the following variables:
-#  LEX_FOUND - true is lex executable is found
-#  LEX_EXECUTABLE - the path to the lex executable
-#  LEX_LIBRARIES - The lex libraries
-#
-# If lex is found on the system, the module provides the macro:
-#  LEX_TARGET(Name FlexInput FlexOutput [COMPILE_FLAGS <string>])
-# which creates a custom command  to generate the <FlexOutput> file from
-# the <FlexInput> file.  If  COMPILE_FLAGS option is specified, the next
-# parameter is added to the lex  command line. Name is an alias used to
-# get  details of  this custom  command.  Indeed the  macro defines  the
-# following variables:
-#  LEX_${Name}_DEFINED - true is the macro ran successfully
-#  LEX_${Name}_OUTPUTS - the source file generated by the custom rule, an
-#  alias for FlexOutput
-#  LEX_${Name}_INPUT - the lex source file, an alias for ${FlexInput}
-#
-# Flex scanners oftenly use tokens  defined by Yacc: the code generated
-# by Flex  depends of the header  generated by Yacc.   This module also
-# defines a macro:
-#  ADD_LEX_YACC_DEPENDENCY(FlexTarget YaccTarget)
-# which  adds the  required dependency  between a  scanner and  a parser
-# where  <FlexTarget>  and <YaccTarget>  are  the  first parameters  of
-# respectively LEX_TARGET and YACC_TARGET macros.
-#
-#  ====================================================================
-#  Example:
-#
-#   find_package(YACC)
-#   find_package(LEX)
-#
-#   YACC_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp
-#   LEX_TARGET(MyScanner lexer.l  ${CMAKE_CURRENT_BIANRY_DIR}/lexer.cpp)
-#   ADD_LEX_YACC_DEPENDENCY(MyScanner MyParser)
-#
-#   include_directories(${CMAKE_CURRENT_BINARY_DIR})
-#   add_executable(Foo
-#      Foo.cc
-#      ${YACC_MyParser_OUTPUTS}
-#      ${LEX_MyScanner_OUTPUTS}
-#   )
-#  ====================================================================
-#
-#=============================================================================
-# Copyright 2010 United States Government as represented by
-#                the U.S. Army Research Laboratory.
-# Copyright 2009 Kitware, Inc.
-# Copyright 2006 Tristan Carel
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#  
-# * Redistributions of source code must retain the above copyright
-#   notice, this list of conditions and the following disclaimer.
-# 
-# * Redistributions in binary form must reproduce the above copyright
-#   notice, this list of conditions and the following disclaimer in the
-#   documentation and/or other materials provided with the distribution.
-# 
-# * The names of the authors may not be used to endorse or promote
-#   products derived from this software without specific prior written
-#   permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#=============================================================================
-
-FIND_PROGRAM(LEX_EXECUTABLE flex DOC "path to the lex executable")
-IF(NOT LEX_EXECUTABLE)
-   FIND_PROGRAM(LEX_EXECUTABLE lex DOC "path to the lex executable")
-ENDIF(NOT LEX_EXECUTABLE)
-MARK_AS_ADVANCED(LEX_EXECUTABLE)
-
-FIND_LIBRARY(FL_LIBRARY NAMES fl
-  DOC "path to the fl library")
-MARK_AS_ADVANCED(FL_LIBRARY)
-SET(LEX_LIBRARIES ${FL_LIBRARY})
-
-IF(LEX_EXECUTABLE)
-
-  #============================================================
-  # LEX_TARGET (public macro)
-  #============================================================
-  #
-  MACRO(LEX_TARGET Name Input Output)
-    SET(LEX_TARGET_usage "LEX_TARGET(<Name> <Input> <Output> [COMPILE_FLAGS <string>]")
-    IF(${ARGC} GREATER 3)
-      IF(${ARGC} EQUAL 5)
-        IF("${ARGV3}" STREQUAL "COMPILE_FLAGS")
-          SET(LEX_EXECUTABLE_opts  "${ARGV4}")
-          SEPARATE_ARGUMENTS(LEX_EXECUTABLE_opts)
-        ELSE()
-          MESSAGE(SEND_ERROR ${LEX_TARGET_usage})
-        ENDIF()
-      ELSE()
-        MESSAGE(SEND_ERROR ${LEX_TARGET_usage})
-      ENDIF()
-    ENDIF()
-
-    ADD_CUSTOM_COMMAND(OUTPUT ${Output}
-      COMMAND ${LEX_EXECUTABLE}
-      ARGS ${LEX_EXECUTABLE_opts} -o${Output} ${Input}
-      DEPENDS ${Input}
-      COMMENT "[LEX][${Name}] Building scanner with ${LEX_EXECUTABLE}"
-      WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR})
-
-    SET(LEX_${Name}_DEFINED TRUE)
-    SET(LEX_${Name}_OUTPUTS ${Output})
-    SET(LEX_${Name}_INPUT ${Input})
-    SET(LEX_${Name}_COMPILE_FLAGS ${LEX_EXECUTABLE_opts})
-  ENDMACRO(LEX_TARGET)
-  #============================================================
-
-
-  #============================================================
-  # ADD_LEX_YACC_DEPENDENCY (public macro)
-  #============================================================
-  #
-  MACRO(ADD_LEX_YACC_DEPENDENCY FlexTarget YaccTarget)
-
-    IF(NOT LEX_${FlexTarget}_OUTPUTS)
-      MESSAGE(SEND_ERROR "Flex target `${FlexTarget}' does not exists.")
-    ENDIF()
-
-    IF(NOT YACC_${YaccTarget}_OUTPUT_HEADER)
-      MESSAGE(SEND_ERROR "Yacc target `${YaccTarget}' does not exists.")
-    ENDIF()
-
-    SET_SOURCE_FILES_PROPERTIES(${LEX_${FlexTarget}_OUTPUTS}
-      PROPERTIES OBJECT_DEPENDS ${YACC_${YaccTarget}_OUTPUT_HEADER})
-  ENDMACRO(ADD_LEX_YACC_DEPENDENCY)
-  #============================================================
-
-  #Need to run a test lex file to determine if YYTEXT_POINTER needs
-  #to be defined
-  EXEC_PROGRAM(${LEX_EXECUTABLE} ARGS ${CMAKE_SOURCE_DIR}/misc/CMake/test_srcs/lex_test.l -o ${CMAKE_BINARY_DIR}/CMakeTmp/lex_test.c RETURN_VALUE _retval OUTPUT_VARIABLE _lexOut)
-  INCLUDE (CheckCFileRuns)
-  SET(FILE_RUN_DEFINITIONS "-DYYTEXT_POINTER=1")
-  CHECK_C_FILE_RUNS(${CMAKE_CURRENT_SOURCE_DIR}/cmake/test_srcs/sys_wait_test.c YYTEXT_POINTER)
-  SET(FILE_RUN_DEFINITIONS)
-  IF(CONFIG_H_FILE)
-	  FILE(APPEND ${CONFIG_H_FILE} "#cmakedefine YYTEXT_POINTER 1\n")
-  ENDIF(CONFIG_H_FILE)
-  
-
-ENDIF(LEX_EXECUTABLE)
-
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(LEX DEFAULT_MSG LEX_EXECUTABLE)
-
-# FindLEX.cmake ends here

cmake/FindPERPLEX.cmake

@@ -0,0 +1,79 @@
+#
+# - Find perplex executable and provides macros to generate custom build rules
+# The module defines the following variables
+#
+#  PERPLEX_EXECUTABLE - path to the perplex program
+#  PERPLEX_TEMPLATE - location of the perplex template file
+
+#=============================================================================
+#                 F I N D P E R P L E X . C M A K E
+#
+# Originally based off of FindBISON.cmake from Kitware's CMake distribution
+#
+# Copyright (c) 2010-2012 United States Government as represented by
+#                the U.S. Army Research Laboratory.
+# Copyright 2009 Kitware, Inc.
+# Copyright 2006 Tristan Carel
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#  
+# * Redistributions of source code must retain the above copyright
+#   notice, this list of conditions and the following disclaimer.
+# 
+# * Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in the
+#   documentation and/or other materials provided with the distribution.
+# 
+# * The names of the authors may not be used to endorse or promote
+#   products derived from this software without specific prior written
+#   permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#=============================================================================
+
+find_program(PERPLEX_EXECUTABLE perplex DOC "path to the perplex executable")
+mark_as_advanced(PERPLEX_EXECUTABLE)
+
+if(PERPLEX_EXECUTABLE AND NOT PERPLEX_TEMPLATE)
+  get_filename_component(perplex_path ${PERPLEX_EXECUTABLE} PATH)
+  if(perplex_path)
+    set(PERPLEX_TEMPLATE "")
+    if(EXISTS ${perplex_path}/../share/perplex/perplex_template.c)
+      get_filename_component(perplex_template_path "${perplex_path}/../share/perplex/perplex_template.c" ABSOLUTE)
+      set(PERPLEX_TEMPLATE "${perplex_template_path}")
+    endif(EXISTS ${perplex_path}/../share/perplex/perplex_template.c)
+    if(EXISTS ${perplex_path}/../share/perplex_template.c AND NOT PERPLEX_TEMPLATE)
+      get_filename_component(perplex_template_path "${perplex_path}/../share/perplex_template.c" ABSOLUTE)
+      set(PERPLEX_TEMPLATE "${perplex_template_path}")
+    endif(EXISTS ${perplex_path}/../share/perplex_template.c AND NOT PERPLEX_TEMPLATE)
+  endif(perplex_path)
+  if(EXISTS /usr/share/perplex/perplex_template.c AND NOT PERPLEX_TEMPLATE)
+    set(PERPLEX_TEMPLATE "/usr/share/perplex/perplex_template.c")
+  endif(EXISTS /usr/share/perplex/perplex_template.c AND NOT PERPLEX_TEMPLATE)
+endif(PERPLEX_EXECUTABLE AND NOT PERPLEX_TEMPLATE)
+include(FindPackageHandleStandardArgs)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(PERPLEX DEFAULT_MSG PERPLEX_EXECUTABLE PERPLEX_TEMPLATE)
+mark_as_advanced(PERPLEX_TEMPLATE)
+
+#============================================================
+# FindPERPLEX.cmake ends here
+
+# Local Variables:
+# tab-width: 8
+# mode: cmake
+# indent-tabs-mode: t
+# End:
+# ex: shiftwidth=2 tabstop=8

cmake/FindRE2C.cmake

@@ -0,0 +1,10 @@
+# The module defines the following variables:
+#  RE2C_EXECUTABLE - the path to the re2c executable
+#
+#=============================================================================
+
+find_program(RE2C_EXECUTABLE re2c DOC "path to the re2c executable")
+mark_as_advanced(RE2C_EXECUTABLE)
+
+include(FindPackageHandleStandardArgs)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(RE2C DEFAULT_MSG RE2C_EXECUTABLE)

cmake/FindYACC.cmake

@@ -1,165 +0,0 @@
-# - Find yacc executable and provides macros to generate custom build rules
-# The module defines the following variables
-#
-#  YACC_EXECUTABLE - path to the yacc program
-#  YACC_FOUND - true if the program was found
-#
-# If yacc is found, the module defines the macros:
-#  YACC_TARGET(<Name> <YaccInput> <CodeOutput> [VERBOSE <file>]
-#              [COMPILE_FLAGS <string>])
-# which will create  a custom rule to generate  a parser. <YaccInput> is
-# the path to  a yacc file. <CodeOutput> is the name  of the source file
-# generated by yacc.  A header file is also  be generated, and contains
-# the  token  list.  If  COMPILE_FLAGS  option is  specified,  the  next
-# parameter is  added in the yacc command line.  if  VERBOSE option is
-# specified, <file> is created  and contains verbose descriptions of the
-# grammar and parser. The macro defines a set of variables:
-#  YACC_${Name}_DEFINED - true is the macro ran successfully
-#  YACC_${Name}_INPUT - The input source file, an alias for <YaccInput>
-#  YACC_${Name}_OUTPUT_SOURCE - The source file generated by yacc 
-#  YACC_${Name}_OUTPUT_HEADER - The header file generated by yacc
-#  YACC_${Name}_OUTPUTS - The sources files generated by yacc
-#  YACC_${Name}_COMPILE_FLAGS - Options used in the yacc command line
-#
-#  ====================================================================
-#  Example:
-#
-#   find_package(YACC)
-#   YACC_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp)
-#   add_executable(Foo main.cpp ${YACC_MyParser_OUTPUTS})
-#  ====================================================================
-#
-#=============================================================================
-# Copyright 2010 United States Government as represented by
-#                the U.S. Army Research Laboratory.
-# Copyright 2009 Kitware, Inc.
-# Copyright 2006 Tristan Carel
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#  
-# * Redistributions of source code must retain the above copyright
-#   notice, this list of conditions and the following disclaimer.
-# 
-# * Redistributions in binary form must reproduce the above copyright
-#   notice, this list of conditions and the following disclaimer in the
-#   documentation and/or other materials provided with the distribution.
-# 
-# * The names of the authors may not be used to endorse or promote
-#   products derived from this software without specific prior written
-#   permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#=============================================================================
-
-
-FIND_PROGRAM(YACC_EXECUTABLE bison DOC "path to the yacc executable")
-IF(NOT YACC_EXECUTABLE)
-   FIND_PROGRAM(YACC_EXECUTABLE yacc DOC "path to the yacc executable")
-ENDIF(NOT YACC_EXECUTABLE)
-MARK_AS_ADVANCED(YACC_EXECUTABLE)
-
-IF(YACC_EXECUTABLE)
-  # internal macro
-  MACRO(YACC_TARGET_option_verbose Name YaccOutput filename)
-    LIST(APPEND YACC_TARGET_cmdopt "--verbose")
-    GET_FILENAME_COMPONENT(YACC_TARGET_output_path "${YaccOutput}" PATH)
-    GET_FILENAME_COMPONENT(YACC_TARGET_output_name "${YaccOutput}" NAME_WE)
-    ADD_CUSTOM_COMMAND(OUTPUT ${filename}
-      COMMAND ${CMAKE_COMMAND}
-      ARGS -E copy
-      "${YACC_TARGET_output_path}/${YACC_TARGET_output_name}.output"
-      "${filename}"
-      DEPENDS
-      "${YACC_TARGET_output_path}/${YACC_TARGET_output_name}.output"
-      COMMENT "[YACC][${Name}] Copying yacc verbose table to ${filename}"
-      WORKING_DIRECTORY ${CMAKE_SOURCE_DIR})
-    SET(YACC_${Name}_VERBOSE_FILE ${filename})
-    LIST(APPEND YACC_TARGET_extraoutputs
-      "${YACC_TARGET_output_path}/${YACC_TARGET_output_name}.output")
-  ENDMACRO(YACC_TARGET_option_verbose)
-
-  # internal macro
-  MACRO(YACC_TARGET_option_extraopts Options)
-    SET(YACC_TARGET_extraopts "${Options}")
-    SEPARATE_ARGUMENTS(YACC_TARGET_extraopts)
-    LIST(APPEND YACC_TARGET_cmdopt ${YACC_TARGET_extraopts})
-  ENDMACRO(YACC_TARGET_option_extraopts)
-
-  #============================================================
-  # YACC_TARGET (public macro)
-  #============================================================
-  #
-  MACRO(YACC_TARGET Name YaccInput YaccOutput)
-    SET(YACC_TARGET_output_header "")
-    SET(YACC_TARGET_command_opt "")
-    SET(YACC_TARGET_outputs "${YaccOutput}")
-    IF(NOT ${ARGC} EQUAL 3 AND NOT ${ARGC} EQUAL 5 AND NOT ${ARGC} EQUAL 7)
-      MESSAGE(SEND_ERROR "Usage")
-    ELSE()
-      # Parsing parameters
-      IF(${ARGC} GREATER 5 OR ${ARGC} EQUAL 5)
-        IF("${ARGV3}" STREQUAL "VERBOSE")
-          YACC_TARGET_option_verbose(${Name} ${YaccOutput} "${ARGV4}")
-        ENDIF()
-        IF("${ARGV3}" STREQUAL "COMPILE_FLAGS")
-          YACC_TARGET_option_extraopts("${ARGV4}")
-        ENDIF()
-      ENDIF()
-
-      IF(${ARGC} EQUAL 7)
-        IF("${ARGV5}" STREQUAL "VERBOSE")
-          YACC_TARGET_option_verbose(${Name} ${YaccOutput} "${ARGV6}")
-        ENDIF()
-      
-        IF("${ARGV5}" STREQUAL "COMPILE_FLAGS")
-          YACC_TARGET_option_extraopts("${ARGV6}")
-        ENDIF()
-      ENDIF()
-
-      # Header's name generated by yacc (see option -d)
-      LIST(APPEND YACC_TARGET_cmdopt "-d")
-      STRING(REGEX REPLACE "^(.*)(\\.[^.]*)$" "\\2" _fileext "${ARGV2}")
-      STRING(REPLACE "c" "h" _fileext ${_fileext})
-      STRING(REGEX REPLACE "^(.*)(\\.[^.]*)$" "\\1${_fileext}" 
-          YACC_${Name}_OUTPUT_HEADER "${ARGV2}")
-      LIST(APPEND YACC_TARGET_outputs "${YACC_${Name}_OUTPUT_HEADER}")
-        
-      ADD_CUSTOM_COMMAND(OUTPUT ${YACC_TARGET_outputs}
-        ${YACC_TARGET_extraoutputs}
-        COMMAND ${YACC_EXECUTABLE}
-        ARGS ${YACC_TARGET_cmdopt} -o ${ARGV2} ${ARGV1}
-        DEPENDS ${ARGV1}
-	COMMENT "[YACC][${Name}] Building parser with ${YACC_EXECUTABLE}"
-        WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR})
-    
-      # define target variables
-      SET(YACC_${Name}_DEFINED TRUE)
-      SET(YACC_${Name}_INPUT ${ARGV1})
-      SET(YACC_${Name}_OUTPUTS ${YACC_TARGET_outputs})
-      SET(YACC_${Name}_COMPILE_FLAGS ${YACC_TARGET_cmdopt})
-      SET(YACC_${Name}_OUTPUT_SOURCE "${YaccOutput}")
-
-    ENDIF(NOT ${ARGC} EQUAL 3 AND NOT ${ARGC} EQUAL 5 AND NOT ${ARGC} EQUAL 7)
-  ENDMACRO(YACC_TARGET)
-  #
-  #============================================================
-
-ENDIF(YACC_EXECUTABLE)
-
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(YACC DEFAULT_MSG YACC_EXECUTABLE)
-
-# FindYACC.cmake ends here

cmake/Generated_Source_Utils.cmake

@@ -0,0 +1,85 @@
+# Utility routines for managing generated files with CMake
+
+macro(MD5 filename md5sum)
+  file(READ "${filename}" RAW_MD5_FILE)
+  string(REGEX REPLACE "\r" "" STRIPPED_MD5_FILE "${RAW_MD5_FILE}")
+  string(MD5 ${md5sum} "${STRIPPED_MD5_FILE}")
+endmacro(MD5)
+
+macro(FILEVAR filename var)
+  string(REGEX REPLACE "[^a-zA-Z0-9]" "_" ${var} ${filename})
+endmacro(FILEVAR)
+
+macro(VERIFY_FILES filelist warn resultvar)
+  set(${resultvar} 1)
+  foreach(fileitem ${filelist})
+    # Deal with absolute and relative paths a bit differently
+    get_filename_component(ITEM_ABS_PATH "${fileitem}" ABSOLUTE)
+    if("${fileitem}" STREQUAL "${ITEM_ABS_PATH}")
+      set(filefullname "${fileitem}")
+    else("${fileitem}" STREQUAL "${ITEM_ABS_PATH}")
+      set(filefullname "${CURRENT_SOURCE_DIR}/${fileitem}")
+    endif("${fileitem}" STREQUAL "${ITEM_ABS_PATH}")
+    get_filename_component(filename "${fileitem}" NAME)
+    # Got filename components sorted - proceed
+    if(NOT EXISTS ${filefullname})
+      message(FATAL_ERROR "Attempted to verify non-existant file ${filefullname}")
+    endif(NOT EXISTS ${filefullname})
+    FILEVAR(${filename} filevar)
+    if(NOT baseline_${filevar}_md5)
+      message(FATAL_ERROR "No baseline MD5 available for ${filename} - baseline_${filevar}_md5 is not defined")
+    endif(NOT baseline_${filevar}_md5)
+    MD5(${filefullname} ${filevar}_md5)
+    if(NOT "${${filevar}_md5}" STREQUAL "${baseline_${filevar}_md5}")
+      if("${warn}" STREQUAL "1")
+	message("\n${filename} differs from baseline: baseline md5 hash is ${baseline_${filevar}_md5} and current hash is ${${filevar}_md5}\n")
+      endif("${warn}" STREQUAL "1")
+      set(${resultvar} 0)
+    else(NOT "${${filevar}_md5}" STREQUAL "${baseline_${filevar}_md5}")
+      if("${warn}" STREQUAL "1")
+	message("${fileitem} OK")
+      endif("${warn}" STREQUAL "1")
+    endif(NOT "${${filevar}_md5}" STREQUAL "${baseline_${filevar}_md5}")
+  endforeach(fileitem ${filelist})
+endmacro(VERIFY_FILES filelist resultvar)
+
+macro(WRITE_MD5_SUMS filelist outfile)
+  foreach(fileitem ${filelist})
+    # Deal with absolute and relative paths a bit differently
+    get_filename_component(ITEM_ABS_PATH "${fileitem}" ABSOLUTE)
+    if("${fileitem}" STREQUAL "${ITEM_ABS_PATH}")
+      set(filefullname "${fileitem}")
+    else("${fileitem}" STREQUAL "${ITEM_ABS_PATH}")
+      set(filefullname "${CURRENT_SOURCE_DIR}/${fileitem}")
+    endif("${fileitem}" STREQUAL "${ITEM_ABS_PATH}")
+    get_filename_component(filename "${fileitem}" NAME)
+    # Got filename components sorted - proceed
+    if(NOT EXISTS ${filefullname})
+      message(FATAL_ERROR "Attempted to get MD5 sum of non-existant file ${filefullname}")
+    endif(NOT EXISTS ${filefullname})
+    FILEVAR(${filename} filevar)
+    MD5(${filefullname} ${filevar}_md5)
+    file(APPEND ${outfile} "set(baseline_${filevar}_md5 ${${filevar}_md5})\n")
+  endforeach(fileitem ${filelist})
+endmacro(WRITE_MD5_SUMS)
+
+
+macro(GET_GENERATOR_EXEC_VERSIONS)
+  # Read lemon version
+  execute_process(COMMAND ${LEMON_EXECUTABLE} -x OUTPUT_VARIABLE lemon_version)
+  string(REPLACE "Lemon version " "" lemon_version "${lemon_version}")
+  string(STRIP "${lemon_version}" lemon_version)
+  # Read re2c version
+  execute_process(COMMAND ${RE2C_EXECUTABLE} -V OUTPUT_VARIABLE re2c_version)
+  string(STRIP "${re2c_version}" re2c_version)
+  # Read perplex version
+  execute_process(COMMAND ${PERPLEX_EXECUTABLE} -v OUTPUT_VARIABLE perplex_version)
+  string(STRIP "${perplex_version}" perplex_version)
+endmacro(GET_GENERATOR_EXEC_VERSIONS)
+
+# Local Variables:
+# tab-width: 8
+# mode: cmake
+# indent-tabs-mode: t
+# End:
+# ex: shiftwidth=2 tabstop=8

cmake/LEMON_Util.cmake

@@ -0,0 +1,146 @@
+# Defines the macro
+#  LEMON_TARGET(<Name> <LemonInput> <LemonSource> <LemonHeader>
+#		[<ArgString>])
+# which will create a custom rule to generate a parser. <LemonInput> is
+# the path to a lemon file. <LemonSource> is the desired name for the
+# generated source file. <LemonHeader> is the desired name for the
+# generated header which contains the token list. Anything in the optional
+# <ArgString> parameter is appended to the lemon command line.
+#
+#  ====================================================================
+#  Example:
+#
+#   find_package(LEMON)
+#   LEMON_TARGET(MyParser parser.y parser.c parser.h)
+#   add_executable(Foo main.cpp ${LEMON_MyParser_OUTPUTS})
+#  ====================================================================
+#
+#=============================================================================
+#
+# Originally based off of FindBISON.cmake from Kitware's CMake distribution
+#
+# Copyright (c) 2010-2012 United States Government as represented by
+#                the U.S. Army Research Laboratory.
+# Copyright 2009 Kitware, Inc.
+# Copyright 2006 Tristan Carel
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#  
+# * Redistributions of source code must retain the above copyright
+#   notice, this list of conditions and the following disclaimer.
+# 
+# * Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in the
+#   documentation and/or other materials provided with the distribution.
+# 
+# * The names of the authors may not be used to endorse or promote
+#   products derived from this software without specific prior written
+#   permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#=============================================================================
+
+#============================================================
+# LEMON_TARGET (public macro)
+#============================================================
+#
+macro(LEMON_TARGET Name LemonInput LemonSource LemonHeader)
+  if(NOT ${ARGC} EQUAL 4 AND NOT ${ARGC} EQUAL 5)
+    message(SEND_ERROR "Usage")
+  else()
+    get_filename_component(LemonInputFull ${LemonInput}  ABSOLUTE)
+    get_filename_component(LemonSourceFull ${LemonSource} ABSOLUTE)
+    get_filename_component(LemonHeaderFull ${LemonHeader} ABSOLUTE)
+
+    if(NOT ${LemonInput} STREQUAL ${LemonInputFull})
+      set(LEMON_${Name}_INPUT "${CMAKE_CURRENT_BINARY_DIR}/${LemonInput}")
+    else(NOT ${LemonInput} STREQUAL ${LemonInputFull})
+      set(LEMON_${Name}_INPUT "${LemonInput}")
+    endif(NOT ${LemonInput} STREQUAL ${LemonInputFull})
+
+    if(NOT ${LemonSource} STREQUAL ${LemonSourceFull})
+      set(LEMON_${Name}_OUTPUT_SOURCE "${CMAKE_CURRENT_BINARY_DIR}/${LemonSource}")
+    else(NOT ${LemonSource} STREQUAL ${LemonSourceFull})
+      set(LEMON_${Name}_OUTPUT_SOURCE "${LemonSource}")
+    endif(NOT ${LemonSource} STREQUAL ${LemonSourceFull})
+
+    if(NOT ${LemonHeader} STREQUAL ${LemonHeaderFull})
+      set(LEMON_${Name}_OUTPUT_HEADER "${CMAKE_CURRENT_BINARY_DIR}/${LemonHeader}")
+    else(NOT ${LemonHeader} STREQUAL ${LemonHeaderFull})
+      set(LEMON_${Name}_OUTPUT_HEADER "${LemonHeader}")
+    endif(NOT ${LemonHeader} STREQUAL ${LemonHeaderFull})
+
+    set(LEMON_${Name}_EXTRA_ARGS    "${ARGV4}")
+
+    # get input name minus path
+    get_filename_component(INPUT_NAME "${LemonInput}" NAME)
+    set(LEMON_BIN_INPUT ${CMAKE_CURRENT_BINARY_DIR}/${INPUT_NAME})
+
+    # names of lemon output files will be based on the name of the input file
+    string(REGEX REPLACE "^(.*)(\\.[^.]*)$" "\\1.c"   LEMON_GEN_SOURCE "${INPUT_NAME}")
+    string(REGEX REPLACE "^(.*)(\\.[^.]*)$" "\\1.h"   LEMON_GEN_HEADER "${INPUT_NAME}")
+    string(REGEX REPLACE "^(.*)(\\.[^.]*)$" "\\1.out" LEMON_GEN_OUT    "${INPUT_NAME}")
+
+    # copy input to bin directory and run lemon
+    add_custom_command(
+      OUTPUT ${LEMON_GEN_OUT} ${LEMON_GEN_SOURCE} ${LEMON_GEN_HEADER}
+      COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_CURRENT_SOURCE_DIR}/${LemonInput} ${LEMON_BIN_INPUT}
+      COMMAND ${LEMON_EXECUTABLE} ${INPUT_NAME} ${LEMON_${Name}_EXTRA_ARGS}
+      DEPENDS ${LemonInput} ${LEMON_TEMPLATE} ${LEMON_EXECUTABLE_TARGET}
+      COMMENT "[LEMON][${Name}] Building parser with ${LEMON_EXECUTABLE}"
+      )
+
+    # rename generated outputs
+    if(NOT "${LemonSource}" STREQUAL "${LEMON_GEN_SOURCE}")
+      add_custom_command(
+	OUTPUT ${LemonSource} 
+	COMMAND ${CMAKE_COMMAND} -E copy ${LEMON_GEN_SOURCE} ${LemonSource}
+	DEPENDS ${LemonInput} ${LEMON_EXECUTABLE_TARGET} ${LEMON_GEN_SOURCE} 
+	)
+      set(LEMON_${Name}_OUTPUTS ${LemonSource} ${LEMON_${Name}_OUTPUTS})
+    endif(NOT "${LemonSource}" STREQUAL "${LEMON_GEN_SOURCE}")
+    if(NOT "${LemonHeader}" STREQUAL "${LEMON_GEN_HEADER}")
+      add_custom_command(
+	OUTPUT ${LemonHeader}
+	COMMAND ${CMAKE_COMMAND} -E copy ${LEMON_GEN_HEADER} ${LemonHeader}
+	DEPENDS ${LemonInput} ${LEMON_EXECUTABLE_TARGET} ${LEMON_GEN_HEADER} 
+	)
+      set(LEMON_${Name}_OUTPUTS ${LemonHeader} ${LEMON_${Name}_OUTPUTS})
+    endif(NOT "${LemonHeader}" STREQUAL "${LEMON_GEN_HEADER}")
+
+    set(LEMON_${Name}_OUTPUTS ${LEMON_GEN_OUT} ${LemonSource} ${LemonHeader})
+
+    # make sure we clean up generated output and copied input
+    if("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}")
+      set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES "${LEMON_${Name}_OUTPUTS}") 
+    else("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}")
+      set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES "${LEMON_${Name}_OUTPUTS};${LEMON_BIN_INPUT}") 
+    endif("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}")
+
+    # macro ran successfully
+    set(LEMON_${Name}_DEFINED TRUE)
+  endif(NOT ${ARGC} EQUAL 4 AND NOT ${ARGC} EQUAL 5)
+endmacro(LEMON_TARGET)
+#
+#============================================================
+# LEMON_Utils.cmake ends here
+
+# Local Variables:
+# tab-width: 8
+# mode: cmake
+# indent-tabs-mode: t
+# End:
+# ex: shiftwidth=2 tabstop=8

cmake/PERPLEX_Util.cmake

@@ -0,0 +1,134 @@
+# Defines two macros - PERPLEX_TARGET, which takes perplex inputs and
+# runs both perplex and re2c to generate C source code/headers, and 
+# ADD_PERPLEX_LEMON_DEPENDENCY which is used to set up dependencies between
+# scanner and parser targets when necessary.
+#
+# #====================================================================
+#  Example:
+#
+#   find_package(LEMON)
+#   find_package(RE2C)
+#   find_package(PERPLEX)
+#
+#   LEMON_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp
+#   PERPLEX_TARGET(MyScanner scanner.re  ${CMAKE_CURRENT_BINARY_DIR}/scanner.cpp ${CMAKE_CURRENT_BINARY_DIR}/scanner_header.hpp)
+#   ADD_PERPLEX_LEMON_DEPENDENCY(MyScanner MyParser)
+#
+#   include_directories(${CMAKE_CURRENT_BINARY_DIR})
+#   add_executable(Foo
+#      Foo.cc
+#      ${LEMON_MyParser_OUTPUTS}
+#      ${PERPLEX_MyScanner_OUTPUTS}
+#   )
+#  ====================================================================
+# 
+#=============================================================================
+#
+# Originally based off of FindBISON.cmake from Kitware's CMake distribution
+#
+# Copyright (c) 2010-2012 United States Government as represented by
+#                the U.S. Army Research Laboratory.
+# Copyright 2009 Kitware, Inc.
+# Copyright 2006 Tristan Carel
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#  
+# * Redistributions of source code must retain the above copyright
+#   notice, this list of conditions and the following disclaimer.
+# 
+# * Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in the
+#   documentation and/or other materials provided with the distribution.
+# 
+# * The names of the authors may not be used to endorse or promote
+#   products derived from this software without specific prior written
+#   permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#=============================================================================
+
+#============================================================
+# PERPLEX_TARGET (public macro)
+#============================================================
+macro(PERPLEX_TARGET Name Input OutputSrc OutputHeader)
+  if(${ARGC} GREATER 4)
+    set(Template ${ARGV4})
+  else(${ARGC} GREATER 4)
+    if(PERPLEX_TEMPLATE)
+      set(Template ${PERPLEX_TEMPLATE})
+    else(PERPLEX_TEMPLATE)
+      message(FATAL_ERROR "\nNo Perplex template file specifed - please specify the file using the PERPLEX_TEMPLATE variable:\ncmake .. -DPERPLEX_TEMPLATE=/path/to/template_file.c\n")
+    endif(PERPLEX_TEMPLATE)
+  endif(${ARGC} GREATER 4)
+
+  get_filename_component(OutputName ${OutputSrc} NAME)
+  set(re2c_src "${CMAKE_CURRENT_BINARY_DIR}/${OutputName}.re")
+
+  add_custom_command(
+    OUTPUT ${re2c_src} ${OutputHeader}
+    COMMAND ${PERPLEX_EXECUTABLE} -c -o ${re2c_src} -i ${OutputHeader} -t ${Template} ${Input}
+    DEPENDS ${Input} ${Template} ${PERPLEX_EXECUTABLE_TARGET} ${RE2C_EXECUTABLE_TARGET}
+    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+    COMMENT "[PERPLEX][${Name}] Generating re2c input with ${PERPLEX_EXECUTABLE}"
+    )
+  if(NOT DEBUGGING_GENERATED_SOURCES)
+    add_custom_command(
+      OUTPUT ${OutputSrc}
+      COMMAND ${RE2C_EXECUTABLE} --no-debug-info --no-generation-date -c -o ${OutputSrc} ${re2c_src}
+      DEPENDS ${Input} ${re2c_src} ${OutputHeader} ${PERPLEX_EXECUTABLE_TARGET} ${RE2C_EXECUTABLE_TARGET}
+      WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+      COMMENT "[RE2C][${Name}] Building scanner with ${RE2C_EXECUTABLE}"
+      )
+  else(NOT DEBUGGING_GENERATED_SOURCES)
+    add_custom_command(
+      OUTPUT ${OutputSrc}
+      COMMAND ${RE2C_EXECUTABLE} --no-generation-date -c -o ${OutputSrc} ${re2c_src}
+      DEPENDS ${Input} ${re2c_src} ${OutputHeader} ${PERPLEX_EXECUTABLE_TARGET} ${RE2C_EXECUTABLE_TARGET}
+      WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+      COMMENT "[RE2C][${Name}] Building scanner with ${RE2C_EXECUTABLE}"
+      )
+  endif(NOT DEBUGGING_GENERATED_SOURCES)
+  set(PERPLEX_${Name}_DEFINED TRUE)
+  set(PERPLEX_${Name}_OUTPUTS ${OutputSrc})
+  set(PERPLEX_${Name}_INPUT ${Input})
+endmacro(PERPLEX_TARGET)
+
+#============================================================
+# ADD_PERPLEX_LEMON_DEPENDENCY (public macro)
+#============================================================
+macro(ADD_PERPLEX_LEMON_DEPENDENCY PERPLEXTarget LemonTarget)
+
+  if(NOT PERPLEX_${PERPLEXTarget}_OUTPUTS)
+    message(SEND_ERROR "PERPLEX target `${PERPLEXTarget}' does not exists.")
+  endif()
+
+  if(NOT LEMON_${LemonTarget}_OUTPUT_HEADER)
+    message(SEND_ERROR "Lemon target `${LemonTarget}' does not exists.")
+  endif()
+
+  set_source_files_properties(${PERPLEX_${PERPLEXTarget}_OUTPUTS}
+    PROPERTIES OBJECT_DEPENDS ${LEMON_${LemonTarget}_OUTPUT_HEADER})
+endmacro(ADD_PERPLEX_LEMON_DEPENDENCY)
+
+#============================================================
+# PERPLEX_Utils.cmake ends here
+
+# Local Variables:
+# tab-width: 8
+# mode: cmake
+# indent-tabs-mode: t
+# End:
+# ex: shiftwidth=2 tabstop=8

cmake/SCL_Utils.cmake

@@ -1,75 +0,0 @@
-# Will need windows logic someday, even though it doesn't work yet, so go ahead
-# and add the DLL_DEFINE macro
-
-MACRO(DLL_DEFINE libname)
-	IF(MSVC)
-		STRING(REGEX REPLACE "lib" "" LOWERCORE "${libname}")
-		STRING(TOUPPER ${LOWERCORE} UPPER_CORE)
-		add_definitions("-D${UPPER_CORE}_EXPORT_DLL")
-	ENDIF(MSVC)
-ENDMACRO()
-
-
-MACRO(SCL_ADDEXEC execname srcs libs)
-  STRING(REGEX REPLACE " " ";" srcslist "${srcs}")
-  STRING(REGEX REPLACE " " ";" libslist "${libs}")
-  add_executable(${execname} ${srcslist})
-  target_link_libraries(${execname} ${libslist})
-  INSTALL(TARGETS ${execname} DESTINATION bin)
-  # Enable extra compiler flags if local executables and/or global options dictate
-  SET(LOCAL_COMPILE_FLAGS "")
-  FOREACH(extraarg ${ARGN})
-	  IF(${extraarg} MATCHES "STRICT" AND SCL-ENABLE_STRICT)
-		  SET(LOCAL_COMPILE_FLAGS "${LOCAL_COMPILE_FLAGS} ${STRICT_FLAGS}")
-	  ENDIF(${extraarg} MATCHES "STRICT" AND SCL-ENABLE_STRICT)
-  ENDFOREACH(extraarg ${ARGN})
-  IF(LOCAL_COMPILE_FLAGS)
-	  SET_TARGET_PROPERTIES(${execname} PROPERTIES COMPILE_FLAGS ${LOCAL_COMPILE_FLAGS})
-  ENDIF(LOCAL_COMPILE_FLAGS)
-ENDMACRO(SCL_ADDEXEC execname srcs libs)
-
-MACRO(SCL_ADDLIB libname srcs libs)
-  STRING(REGEX REPLACE " " ";" srcslist "${srcs}")
-  STRING(REGEX REPLACE " " ";" libslist1 "${libs}")
-  STRING(REGEX REPLACE "-framework;" "-framework " libslist "${libslist1}")
-  DLL_DEFINE(${libname})
-  IF(BUILD_SHARED_LIBS)
-	  add_library(${libname} SHARED ${srcslist})
-	  if(NOT ${libs} MATCHES "NONE")
-		  target_link_libraries(${libname} ${libslist})
-	  endif(NOT ${libs} MATCHES "NONE")
-	  SET_TARGET_PROPERTIES(${libname} PROPERTIES VERSION ${SCL_VERSION_MAJOR}.${SCL_VERSION_MINOR} SOVERSION ${SCL_VERSION_MAJOR} )
-	  INSTALL(TARGETS ${libname} DESTINATION lib)
-  ENDIF(BUILD_SHARED_LIBS)
-  IF(BUILD_STATIC_LIBS AND NOT MSVC)
-	  add_library(${libname}-static STATIC ${srcslist})
-	  if(NOT ${libs} MATCHES "NONE")
-		  target_link_libraries(${libname}-static ${libslist})
-	  endif(NOT ${libs} MATCHES "NONE")
-	  IF(NOT WIN32)
-		  SET_TARGET_PROPERTIES(${libname}-static PROPERTIES OUTPUT_NAME "${libname}")
-	  ENDIF(NOT WIN32)
-	  IF(WIN32)
-		  # We need the lib prefix on win32, so add it even if our add_library
-		  # wrapper function has removed it due to the target name - see
-		  # http://www.cmake.org/Wiki/CMake_FAQ#How_do_I_make_my_shared_and_static_libraries_have_the_same_root_name.2C_but_different_suffixes.3F
-		  SET_TARGET_PROPERTIES(${libname}-static PROPERTIES PREFIX "lib")
-	  ENDIF(WIN32)
-	  INSTALL(TARGETS ${libname}-static DESTINATION lib)
-  ENDIF(BUILD_STATIC_LIBS AND NOT MSVC)
-  # Enable extra compiler flags if local libraries and/or global options dictate
-  SET(LOCAL_COMPILE_FLAGS "")
-  FOREACH(extraarg ${ARGN})
-	  IF(${extraarg} MATCHES "STRICT" AND SCL-ENABLE_STRICT)
-		  SET(LOCAL_COMPILE_FLAGS "${LOCAL_COMPILE_FLAGS} ${STRICT_FLAGS}")
-	  ENDIF(${extraarg} MATCHES "STRICT" AND SCL-ENABLE_STRICT)
-  ENDFOREACH(extraarg ${ARGN})
-  IF(LOCAL_COMPILE_FLAGS)
-	  IF(BUILD_SHARED_LIBS)
-		  SET_TARGET_PROPERTIES(${libname} PROPERTIES COMPILE_FLAGS ${LOCAL_COMPILE_FLAGS})
-	  ENDIF(BUILD_SHARED_LIBS)
-	  IF(BUILD_STATIC_LIBS AND NOT MSVC)
-		  SET_TARGET_PROPERTIES(${libname}-static PROPERTIES COMPILE_FLAGS ${LOCAL_COMPILE_FLAGS})
-	  ENDIF(BUILD_STATIC_LIBS AND NOT MSVC)
-  ENDIF(LOCAL_COMPILE_FLAGS)
-ENDMACRO(SCL_ADDLIB libname srcs libs)

cmake/SC_Utils.cmake

@@ -0,0 +1,133 @@
+
+# set compile definitions for dll exports on windows
+MACRO(DEFINE_DLL_EXPORTS libname)
+    IF( MSVC OR BORLAND )
+        if( ${libname} MATCHES "sdai_.*" )
+            set( export "SC_SCHEMA_DLL_EXPORTS" )
+        else()
+            STRING(REGEX REPLACE "lib" "" shortname "${libname}")
+            STRING(REGEX REPLACE "step" "" LOWERCORE "${shortname}")
+            STRING(TOUPPER ${LOWERCORE} UPPER_CORE)
+            set( export "SC_${UPPER_CORE}_DLL_EXPORTS" )
+        endif()
+        get_target_property(defs ${libname} COMPILE_DEFINITIONS )
+        if( defs ) #if no properties, ${defs} will be defs-NOTFOUND which CMake interprets as false
+            set( defs "${defs};${export}")
+        else( defs )
+            set( defs "${export}")
+        endif( defs )
+        set_target_properties(${libname} PROPERTIES COMPILE_DEFINITIONS "${defs}" )
+    ENDIF( MSVC OR BORLAND )
+ENDMACRO(DEFINE_DLL_EXPORTS libname)
+
+# set compile definitions for dll imports on windows
+MACRO( DEFINE_DLL_IMPORTS tgt libs )
+    IF( MSVC OR BORLAND )
+        get_target_property(defs ${tgt} COMPILE_DEFINITIONS )
+        if( NOT defs ) #if no properties, ${defs} will be defs-NOTFOUND which CMake interprets as false
+            set( defs "")
+        endif( NOT defs )
+        foreach( lib ${libs} )
+            STRING(REGEX REPLACE "lib" "" shortname "${lib}")
+            STRING(REGEX REPLACE "step" "" LOWERCORE "${shortname}")
+            STRING(TOUPPER ${LOWERCORE} UPPER_CORE)
+            list( APPEND defs "SC_${UPPER_CORE}_DLL_IMPORTS" )
+        endforeach( lib ${libs} )
+        if( DEFINED defs )
+            if( defs )
+                set_target_properties( ${tgt} PROPERTIES COMPILE_DEFINITIONS "${defs}" )
+            endif( defs )
+        endif( DEFINED defs )
+    ENDIF( MSVC OR BORLAND )
+ENDMACRO( DEFINE_DLL_IMPORTS tgt libs )
+
+#EXCLUDE_OR_INSTALL(target destination ARGV3)
+# installs ${target} in ${destination} unless testing is enabled AND ${arg_3} == "TESTABLE",
+# in which case the EXCLUDE_FROM_ALL property is set for testing.
+# EXCLUDE_FROM_ALL cannot be set on targets that are to be installed,
+# so either test the target or install it - but not both
+MACRO(EXCLUDE_OR_INSTALL target dest arg_3 )
+    if( NOT ( ( SC_ENABLE_TESTING ) AND ( "${arg_3}" STREQUAL "TESTABLE" ) ) )
+        INSTALL(TARGETS ${target} DESTINATION ${dest})
+    else( NOT ( ( SC_ENABLE_TESTING ) AND ( "${arg_3}" STREQUAL "TESTABLE" ) ) )
+        set_target_properties( ${target} PROPERTIES EXCLUDE_FROM_ALL ON )
+    endif( NOT ( ( SC_ENABLE_TESTING ) AND ( "${arg_3}" STREQUAL "TESTABLE" ) ) )
+ENDMACRO(EXCLUDE_OR_INSTALL target dest arg_3 )
+
+#SC_ADDEXEC( execname "source files" "linked libs" ["TESTABLE"] ["MSVC flag" ...])
+# optional 4th argument of "TESTABLE", passed to EXCLUDE_OR_INSTALL macro
+# optional args can also be used by MSVC-specific code, but it looks like these two uses
+# will not conflict because the MSVC args must contain "STRICT"
+MACRO(SC_ADDEXEC execname srcslist libslist)
+    add_executable(${execname} ${srcslist})
+    target_link_libraries(${execname} ${libslist})
+    DEFINE_DLL_IMPORTS(${execname} "${libslist}")  #add import definitions for all libs that the executable is linked to
+    EXCLUDE_OR_INSTALL( ${execname} "bin" "${ARGV3}" )
+    # Enable extra compiler flags if local executables and/or global options dictate
+    SET(LOCAL_COMPILE_FLAGS "")
+    FOREACH(extraarg ${ARGN})
+        IF(${extraarg} MATCHES "STRICT" AND SC-ENABLE_STRICT)
+            SET(LOCAL_COMPILE_FLAGS "${LOCAL_COMPILE_FLAGS} ${STRICT_FLAGS}")
+        ENDIF(${extraarg} MATCHES "STRICT" AND SC-ENABLE_STRICT)
+    ENDFOREACH(extraarg ${ARGN})
+    IF(LOCAL_COMPILE_FLAGS)
+        SET_TARGET_PROPERTIES(${execname} PROPERTIES COMPILE_FLAGS ${LOCAL_COMPILE_FLAGS})
+    ENDIF(LOCAL_COMPILE_FLAGS)
+ENDMACRO(SC_ADDEXEC execname srcslist libslist)
+
+#SC_ADDLIB( libname "source files" "linked libs" ["TESTABLE"] ["MSVC flag" ...])
+# optional 4th argument of "TESTABLE", passed to EXCLUDE_OR_INSTALL macro
+# optional args can also be used by MSVC-specific code, but it looks like these two uses
+# will not conflict because the MSVC args must contain "STRICT"
+MACRO(SC_ADDLIB libname srcslist libslist)
+  STRING(REGEX REPLACE "-framework;" "-framework " libslist "${libslist1}")
+  IF(SC_BUILD_SHARED_LIBS)
+      add_library(${libname} SHARED ${srcslist})
+      DEFINE_DLL_EXPORTS(${libname})
+      if(NOT "${libs}" MATCHES "NONE")
+          target_link_libraries(${libname} ${libslist})
+          DEFINE_DLL_IMPORTS(${libname} "${libslist}" )
+      endif(NOT "${libs}" MATCHES "NONE")
+      SET_TARGET_PROPERTIES(${libname} PROPERTIES VERSION ${SC_ABI_VERSION} SOVERSION ${SC_ABI_SOVERSION} )
+      EXCLUDE_OR_INSTALL( ${libname} "lib" "${ARGV3}" )
+    if(APPLE)
+        set_target_properties(${libname} PROPERTIES LINK_FLAGS "-flat_namespace -undefined suppress")
+    endif(APPLE)
+  ENDIF(SC_BUILD_SHARED_LIBS)
+  IF(SC_BUILD_STATIC_LIBS AND NOT MSVC)
+      add_library(${libname}-static STATIC ${srcslist})
+      DEFINE_DLL_EXPORTS(${libname}-static)
+      if(NOT ${libs} MATCHES "NONE")
+          target_link_libraries(${libname}-static "${libslist}")
+          DEFINE_DLL_IMPORTS(${libname}-static ${libslist} )
+      endif(NOT ${libs} MATCHES "NONE")
+      IF(NOT WIN32)
+          SET_TARGET_PROPERTIES(${libname}-static PROPERTIES OUTPUT_NAME "${libname}")
+      ENDIF(NOT WIN32)
+      IF(WIN32)
+          # We need the lib prefix on win32, so add it even if our add_library
+          # wrapper function has removed it due to the target name - see
+          # http://www.cmake.org/Wiki/CMake_FAQ#How_do_I_make_my_shared_and_static_libraries_have_the_same_root_name.2C_but_different_suffixes.3F
+          SET_TARGET_PROPERTIES(${libname}-static PROPERTIES PREFIX "lib")
+      ENDIF(WIN32)
+      EXCLUDE_OR_INSTALL( ${libname}-static "lib" "${ARGV3}" )
+    if(APPLE)
+        set_target_properties(${libname}-static PROPERTIES LINK_FLAGS "-flat_namespace -undefined suppress")
+    endif(APPLE)
+  ENDIF(SC_BUILD_STATIC_LIBS AND NOT MSVC)
+  # Enable extra compiler flags if local libraries and/or global options dictate
+  SET(LOCAL_COMPILE_FLAGS "")
+  FOREACH(extraarg ${ARGN})
+      IF(${extraarg} MATCHES "STRICT" AND SC-ENABLE_STRICT)
+          SET(LOCAL_COMPILE_FLAGS "${LOCAL_COMPILE_FLAGS} ${STRICT_FLAGS}")
+      ENDIF(${extraarg} MATCHES "STRICT" AND SC-ENABLE_STRICT)
+  ENDFOREACH(extraarg ${ARGN})
+  IF(LOCAL_COMPILE_FLAGS)
+      IF(BUILD_SHARED_LIBS)
+          SET_TARGET_PROPERTIES(${libname} PROPERTIES COMPILE_FLAGS ${LOCAL_COMPILE_FLAGS})
+      ENDIF(BUILD_SHARED_LIBS)
+      IF(BUILD_STATIC_LIBS AND NOT MSVC)
+          SET_TARGET_PROPERTIES(${libname}-static PROPERTIES COMPILE_FLAGS ${LOCAL_COMPILE_FLAGS})
+      ENDIF(BUILD_STATIC_LIBS AND NOT MSVC)
+  ENDIF(LOCAL_COMPILE_FLAGS)
+ENDMACRO(SC_ADDLIB libname srcslist libslist)

cmake/cmake_uninstall.cmake.in

@@ -0,0 +1,22 @@
+if (NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt")
+    message(FATAL_ERROR "Cannot find install manifest: \"@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt\"")
+endif(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt")
+
+file(READ "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt" files)
+string(REGEX REPLACE "\n" ";" files "${files}")
+list(REVERSE files)
+foreach (file ${files})
+    message(STATUS "Uninstalling \"$ENV{DESTDIR}${file}\"")
+    if (EXISTS "$ENV{DESTDIR}${file}")
+        execute_process(
+            COMMAND ${CMAKE_COMMAND} -E remove "$ENV{DESTDIR}${file}"
+            OUTPUT_VARIABLE rm_out
+            RESULT_VARIABLE rm_retval
+        )
+        if(NOT ${rm_retval} EQUAL 0)
+            message(FATAL_ERROR "Problem when removing \"$ENV{DESTDIR}${file}\"")
+        endif (NOT ${rm_retval} EQUAL 0)
+    else (EXISTS "$ENV{DESTDIR}${file}")
+        message(STATUS "File \"$ENV{DESTDIR}${file}\" does not exist.")
+    endif (EXISTS "$ENV{DESTDIR}${file}")
+endforeach(file)

cmake/manage_generated.cmake.in

@@ -0,0 +1,100 @@
+# Inherit the parent CMake setting
+set(CURRENT_SOURCE_DIR "@CMAKE_CURRENT_SOURCE_DIR@")
+set(LEMON_EXECUTABLE "@LEMON_EXECUTABLE@")
+set(RE2C_EXECUTABLE "@RE2C_EXECUTABLE@")
+set(PERPLEX_EXECUTABLE "@PERPLEX_EXECUTABLE@")
+set(SYNC_SCRIPT "@SYNC_SCRIPT@")
+set(SYNC_TARGET_NAME "@SYNC_TARGET_NAME@")
+set(DEBUGGING_GENERATED_SOURCES "@DEBUGGING_GENERATED_SOURCES@")
+
+if(NOT DEBUGGING_GENERATED_SOURCES)
+  # Include the file the provides the baseline against which
+  # current files will be compared
+  include("@BASELINE_INFORMATION_FILE@")
+
+  # Define a variety of convenience routines
+  include("@PROJECT_CMAKE_DIR@/Generated_Source_Utils.cmake")
+
+  # The following need to be checked:
+  #
+  # 1.  baseline input MD5 hashes against the current input
+  #     hashes.  If the cached sources were generated using
+  #     inputs other than the current inputs, note they are
+  #     out of sync but don't stop.  Templates used by perplex
+  #     and lemon are part of this group.
+  #
+  # 2.  baseline cached source MD5 hashes against current
+  #     cached source MD5 hashes.  Making sure no changes
+  #     have been made to the generated sources.  If the
+  #     cached sources need to be updated (see #1, for example)
+  #     their MD5 hashes need to be updated at the same time.
+  #
+  # 3.  MD5 hashes of output generated by the tools against
+  #     the MD5 hashes of the equalivent cached sources, if
+  #     a) the tool versions are the same b) the input MD5
+  #     hash comparisions were the same and c) the baseline
+  #     test from #2 passed.  This is done to detect platform
+  #     differences in output sources, but is only valid if
+  #     the input files are in their "pristine" state and the
+  #     toolchain is equalivent to that used for the baseline.
+
+  # Individually verify all of the files in question.
+  set(input_files "@INPUT_FILELIST@")
+  VERIFY_FILES("${input_files}" 0 input_unchanged)
+  set(template_files "@TEMPLATE_FILELIST@")
+  VERIFY_FILES("${template_files}" 1 templates_unchanged)
+  set(cached_files "@CACHED_FILELIST@")
+  VERIFY_FILES("${cached_files}" 1 cached_unchanged)
+  if(NOT cached_unchanged)
+    message(FATAL_ERROR "Cached generated sources do not match the MD5 hashes present in @BASELINE_INFORMATION_FILE@ - if updating cached sources, remember that the build enforces the requirement that associated MD5 hashes in @BASELINE_INFORMATION_FILE@ are current as well.  Cached generated sources should not be directly edited.")
+  endif(NOT cached_unchanged)
+
+  GET_GENERATOR_EXEC_VERSIONS()
+
+  if("${lemon_version}" VERSION_EQUAL "${baseline_lemon_version}" AND "${perplex_version}" VERSION_EQUAL "${baseline_perplex_version}" AND "${re2c_version}" VERSION_EQUAL "${baseline_re2c_version}")
+    set(tool_versions_equal 1)
+  else()
+    set(tool_versions_equal 0)
+  endif()
+
+  if(NOT input_unchanged)
+    if(templates_unchanged AND tool_versions_equal)
+      message("Input files changed - syncing cached outputs")
+      execute_process(COMMAND ${CMAKE_COMMAND} -P ${SYNC_SCRIPT} OUTPUT_VARIABLE output) 
+    else(templates_unchanged AND tool_versions_equal)
+      if(NOT templates_unchanged AND NOT tool_versions_equal)
+	message("Input files have been updated, but templates and current tool versions do not match those previously used to generate cached sources.  Automatic syncing will not proceed.")
+	message("To force syncing, use the build target ${SYNC_TARGET_NAME}")
+      else(NOT templates_unchanged AND NOT tool_versions_equal)
+	if(NOT templates_unchanged)
+	  message("Input files have been updated, but templates do not match those previously used to generate cached sources.  Automatic syncing will not proceed.")
+	  message("To force syncing, use the build target ${SYNC_TARGET_NAME}")
+	endif(NOT templates_unchanged)
+	if(NOT tool_versions_equal)
+	  message("Input files have been updated, but tool versions do not match those previously used to generate cached sources.  Automatic syncing will not proceed.")
+	  message("To force syncing, use the build target ${SYNC_TARGET_NAME}")
+	endif(NOT tool_versions_equal)
+      endif(NOT templates_unchanged AND NOT tool_versions_equal)
+    endif(templates_unchanged AND tool_versions_equal)
+  else(NOT input_unchanged)
+    if(templates_unchanged AND cached_unchanged AND tool_versions_equal)
+      # Under these conditions, the uncached generated output should be equal to the cached files.
+      # Check if it is - a difference here may indicate a platform-specific behavior in one of the
+      # generators.
+      set(build_files "@BUILD_OUTPUT_FILELIST@")
+      VERIFY_FILES("${build_files}" 1 platform_unchanged)
+      if(NOT platform_unchanged)
+	message("Note: give these build inputs and tools, source files should be identical to generated files.  Differences were still observed - possible indiciation of platform-specific generator behavior.")
+      endif(NOT platform_unchanged)
+    endif(templates_unchanged AND cached_unchanged AND tool_versions_equal)
+  endif(NOT input_unchanged)
+else(NOT DEBUGGING_GENERATED_SOURCES)
+  message("\nNote: DEBUGGING_GENERATED_SOURCES is enabled - generated outputs will contain configuration-specific debugging information, so syncing cached output files is not possible.  To restore normal behavior, disable DEBUGGING_GENERATED_SOURCES.\n")
+endif(NOT DEBUGGING_GENERATED_SOURCES)
+
+# Local Variables:
+# tab-width: 8
+# mode: cmake
+# indent-tabs-mode: t
+# End:
+# ex: shiftwidth=2 tabstop=8

cmake/sc_version_string.cmake

@@ -0,0 +1,58 @@
+#use git for a pretty commit id
+#uses 'git describe --tags', so tags are required in the repo
+#create a tag with 'git tag <name>' and 'git push --tags'
+
+# http://stackoverflow.com/questions/3780667
+# http://www.cmake.org/pipermail/cmake/2009-February/027014.html
+
+#sc_version_string.h defines sc_version() which returns a pretty commit description and a build timestamp.
+
+set(SC_IS_SUBBUILD "@SC_IS_SUBBUILD@")
+
+set(VERS_FILE ${SOURCE_DIR}/SC_VERSION.txt )
+if( EXISTS ${SOURCE_DIR}/.git )
+    find_package(Git QUIET)
+    if(GIT_FOUND)
+        execute_process(COMMAND ${GIT_EXECUTABLE} describe --tags RESULT_VARIABLE res_var OUTPUT_VARIABLE GIT_COMMIT_ID )
+        if( NOT ${res_var} EQUAL 0 )
+            file( READ ${VERS_FILE} GIT_COMMIT_ID LIMIT 255 )
+	    if(NOT SC_IS_SUBBUILD)
+              message( WARNING "Git failed (probably no tags in repo). Build will contain revision info from ${VERS_FILE}." )
+	    endif(NOT SC_IS_SUBBUILD)
+        endif()
+    else(GIT_FOUND)
+        file( READ ${VERS_FILE} GIT_COMMIT_ID LIMIT 255 )
+	if(NOT SC_IS_SUBBUILD)
+          message( WARNING "Git not found. Build will contain revision info from ${VERS_FILE}." )
+	endif(NOT SC_IS_SUBBUILD)
+    endif(GIT_FOUND)
+else()
+    file( READ ${VERS_FILE} GIT_COMMIT_ID LIMIT 255 )
+    if(NOT SC_IS_SUBBUILD)
+      message( WARNING "Git failed ('.git' not found). Build will contain revision info from ${VERS_FILE}." )
+    endif(NOT SC_IS_SUBBUILD)
+endif()
+
+string( REPLACE "\n" "" GIT_COMMIT_ID ${GIT_COMMIT_ID} )
+
+set( vstring "//sc_version_string.h - written by cmake. Changes will be lost!\n"
+             "#ifndef SC_VERSION_STRING\n"
+             "#define SC_VERSION_STRING\n\n"
+             "/*\n** Returns a string like \"test-1-g5e1fb47, built at TIME on DATE\", where test is the\n"
+             "** name of the last tagged git revision, 1 is the number of commits since that tag,\n"
+             "** 'g' is unknown, 5e1fb47 is the first 7 chars of the git sha1 commit id, and TIME\n"
+             "** and DATE are substituted by the compiler.\n*/\n\n"
+             "const char* sc_version() {\n"
+             "    return \"git commit id ${GIT_COMMIT_ID}, built at \" __TIME__ \" on \" __DATE__ \;\n"
+             "}\n\n"
+             "#endif\n"
+   )
+
+file(WRITE sc_version_string.h.txt ${vstring} )
+# copy the file to the final header only if the version changes
+# reduces needless rebuilds
+execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different
+                        sc_version_string.h.txt ${BINARY_DIR}/include/sc_version_string.h)
+if(NOT SC_IS_SUBBUILD)
+  message("-- sc_version_string.h is up-to-date.")
+endif(NOT SC_IS_SUBBUILD)

cmake/scl_version_string.cmake

@@ -1,48 +0,0 @@
-#use git for a pretty commit id
-#uses 'git describe --tags', so tags are required in the repo
-#create a tag with 'git tag <name>' and 'git push --tags'
-
-# http://stackoverflow.com/questions/3780667
-# http://www.cmake.org/pipermail/cmake/2009-February/027014.html
-
-#scl_version_string.h defines scl_version() which returns a pretty commit description and a build timestamp.
-
-set(VERS_FILE ${SOURCE_DIR}/SCL_VERSION.txt )
-if( EXISTS ${SOURCE_DIR}/.git )
-    find_package(Git QUIET)
-    if(GIT_FOUND)
-        execute_process(COMMAND ${GIT_EXECUTABLE} describe --tags RESULT_VARIABLE res_var OUTPUT_VARIABLE GIT_COMMIT_ID )
-        if( NOT ${res_var} EQUAL 0 )
-            file( READ ${VERS_FILE} GIT_COMMIT_ID LIMIT 255 )
-            message( WARNING "Git failed (probably no tags in repo). Build will contain revision info from ${VERS_FILE}." )
-        endif()
-    else(GIT_FOUND)
-        file( READ ${VERS_FILE} GIT_COMMIT_ID LIMIT 255 )
-        message( WARNING "Git not found. Build will contain revision info from ${VERS_FILE}." )
-    endif(GIT_FOUND)
-else()
-    file( READ ${VERS_FILE} GIT_COMMIT_ID LIMIT 255 )
-    message( WARNING "Git failed ('.git' not found). Build will contain revision info from ${VERS_FILE}." )
-endif()
-
-string( REPLACE "\n" "" GIT_COMMIT_ID ${GIT_COMMIT_ID} )
-
-set( vstring "//scl_version_string.h - written by cmake. Changes will be lost!\n"
-             "#ifndef SCL_VERSION_STRING\n"
-             "#define SCL_VERSION_STRING\n\n"
-             "/*\n** Returns a string like \"test-1-g5e1fb47, built on <timestamp>\", where test is the\n"
-             "** name of the last tagged git revision, 1 is the number of commits since that tag,\n"
-             "** 'g' is unknown, 5e1fb47 is the first 7 chars of the git sha1 commit id, and\n"
-             "** <timestamp> is the output of your system's 'date' command.\n*/\n\n"
-             "const char* scl_version() {\n"
-             "    return \"git commit id ${GIT_COMMIT_ID}, built at \"__TIME__\" on \"__DATE__\;\n"
-             "}\n\n"
-             "#endif\n"
-   )
-
-file(WRITE scl_version_string.h.txt ${vstring} )
-# copy the file to the final header only if the version changes
-# reduces needless rebuilds
-execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different
-                        scl_version_string.h.txt ${BINARY_DIR}/include/scl_version_string.h)
-message("-- scl_version_string.h is up-to-date.")

cmake/sync_generated.cmake.in

@@ -0,0 +1,83 @@
+# Inherit the parent CMake setting
+set(CURRENT_SOURCE_DIR @CMAKE_CURRENT_SOURCE_DIR@)
+set(CURRENT_BINARY_DIR @CMAKE_CURRENT_BINARY_DIR@)
+set(CACHED_FILES_DIR @CACHED_FILES_DIR@)
+set(LEMON_EXECUTABLE @LEMON_EXECUTABLE@)
+set(RE2C_EXECUTABLE @RE2C_EXECUTABLE@)
+set(PERPLEX_EXECUTABLE @PERPLEX_EXECUTABLE@)
+set(LOCKED_SOURCE_DIR @LOCKED_SOURCE_DIR@)
+set(DEBUGGING_GENERATED_SOURCES @DEBUGGING_GENERATED_SOURCES@)
+
+if(NOT DEBUGGING_GENERATED_SOURCES)
+  # Define a variety of convenience routines
+  include(@PROJECT_CMAKE_DIR@/Generated_Source_Utils.cmake)
+
+  # The following steps are executed to sync generated sources:
+  #
+  # 1.  Create a new verification_info.cmake file and populate
+  #     it with the current versions of perplex, re2c and lemon.
+  #     Also add the MD5 sums for current template files.
+  #
+  # 2.  For all files that need to be updated in the cache,
+  #     calculate new MD5 sums and add them to the new
+  #     verification_info.cmake - this is usually the input
+  #     files and the generated outputs.
+  #
+  # 3.  Overwrite the original cached verification_info.cmake
+  #     and generated files with the new ones.  If LOCKED_SOURCE_DIR
+  #     is ON, this step will not be carried out - instead, an
+  #     informational message with manual updating instructions
+  #     will be printed.
+
+  set(new_info_file "${CURRENT_BINARY_DIR}/verification_info.cmake.new")
+
+
+  file(WRITE ${new_info_file} "# Autogenerated verification information\n")
+
+  # Handle generator version numbers
+  GET_GENERATOR_EXEC_VERSIONS()
+  file(APPEND ${new_info_file} "set(baseline_lemon_version \"${lemon_version}\")\n")
+  file(APPEND ${new_info_file} "set(baseline_re2c_version \"${re2c_version}\")\n")
+  file(APPEND ${new_info_file} "set(baseline_perplex_version \"${perplex_version}\")\n")
+
+  # Handle template files
+  set(template_files "@TEMPLATE_FILELIST@")
+  WRITE_MD5_SUMS("${template_files}" "${new_info_file}")
+
+  # Handle input files
+  set(input_files "@INPUT_FILELIST@")
+  WRITE_MD5_SUMS("${input_files}" "${new_info_file}")
+
+  # Handle generated files
+  set(output_files "@BUILD_OUTPUT_FILELIST@")
+  WRITE_MD5_SUMS("${output_files}" "${new_info_file}")
+
+  # Copy files into their final locations
+  if(NOT LOCKED_SOURCE_DIR)
+    configure_file(${new_info_file} "${CACHED_FILES_DIR}/verification_info.cmake" COPYONLY)
+    foreach(outf ${output_files})
+      get_filename_component(filecorename ${outf} NAME)
+      message("copying ${outf} to ${CACHED_FILES_DIR}/${filecorename}")
+      configure_file(${outf} "${CACHED_FILES_DIR}/${filecorename}" COPYONLY)
+    endforeach(outf ${output_files})
+  else(NOT LOCKED_SOURCE_DIR)
+    message("Source directory writing is locked - LOCKED_SOURCE_DIR is set.")
+    message("To update the generated files, manually copy the following to ${CACHED_FILES_DIR}:")
+    message("   ${new_info_file} (rename to verification_info.cmake)")
+    foreach(outf ${output_files})
+      message("   ${outf}")
+    endforeach(outf ${output_files})
+  endif(NOT LOCKED_SOURCE_DIR)
+
+else (NOT DEBUGGING_GENERATED_SOURCES)
+  
+  message("\nNote: DEBUGGING_GENERATED_SOURCES is enabled - generated outputs will contain configuration-specific debugging information, so syncing cached output files is not possible.  To restore normal behavior, disable DEBUGGING_GENERATED_SOURCES.\n") 
+
+endif(NOT DEBUGGING_GENERATED_SOURCES)
+
+# Local Variables:
+# tab-width: 8
+# mode: cmake
+# indent-tabs-mode: t
+# End:
+# ex: shiftwidth=2 tabstop=8

cmake/verify_generated.cmake.in

@@ -0,0 +1,37 @@
+# Inherit the parent CMake setting
+set(DEBUGGING_GENERATED_SOURCES @DEBUGGING_GENERATED_SOURCES@)
+set(CURRENT_SOURCE_DIR @CMAKE_CURRENT_SOURCE_DIR@)
+
+# Include the file the provides the baseline against which
+# current files will be compared
+if(NOT DEBUGGING_GENERATED_SOURCES)
+
+  include(@BASELINE_INFORMATION_FILE@)
+
+  # Define a variety of convenience routines
+  include(@PROJECT_CMAKE_DIR@/Generated_Source_Utils.cmake)
+
+  # Individually verify all of the files in question.
+  set(filelist "@CACHED_FILELIST@")
+  VERIFY_FILES("${filelist}" 1 srcs_pass)
+  if(NOT srcs_pass)
+    message(FATAL_ERROR "Generated sources have been modified.  These files should never be modified directly except when debugging faulty output from the generators - changes to lexer and parser logic should be made to the generator input files.  If this is a debugging situation, set the variable DEBUGGING_GENERATED_SOURCES to ON during the CMake configure.")
+  endif(NOT srcs_pass)
+
+  # If we got by that test, see if it looks like these 
+  # sources came from the current input files.  It's not
+  # a failure condition if they didn't, but warn about it.
+  set(filelist "@INPUT_FILELIST@")
+  VERIFY_FILES("${filelist}" 0 inputs_same)
+  if(NOT inputs_same)
+    message("Note: cached generated sources are not in sync with input files.")
+  endif(NOT inputs_same)
+
+endif(NOT DEBUGGING_GENERATED_SOURCES)
+
+# Local Variables:
+# tab-width: 8
+# mode: cmake
+# indent-tabs-mode: t
+# End:
+# ex: shiftwidth=2 tabstop=8

ctest_matrix.cmake

@@ -8,49 +8,17 @@ set( CTEST_MEMORYCHECK_COMMAND /usr/bin/valgrind )
 set( CTEST_INITIAL_CACHE "
 SITE:STRING=${CTEST_SITE}
 BUILDNAME:STRING=${CTEST_BUILD_NAME}
-ENABLE_TESTING:BOOL=ON
-CMAKE_BUILD_TYPE:STRING=Debug
+SC_ENABLE_TESTING:BOOL=ON
+SC_BUILD_TYPE:STRING=Debug
 ")
 
-# find number of processors, for faster builds
-# from http://www.kitware.com/blog/home/post/63
-if(NOT DEFINED PROCESSOR_COUNT)
-  # Unknown:
-  set(PROCESSOR_COUNT 0)
-
-  # Linux:
-  set(cpuinfo_file "/proc/cpuinfo")
-  if(EXISTS "${cpuinfo_file}")
-    file(STRINGS "${cpuinfo_file}" procs REGEX "^processor.: [0-9]+$")
-    list(LENGTH procs PROCESSOR_COUNT)
-  endif()
-
-  # Mac:
-  if(APPLE)
-    find_program(cmd_sys_pro "system_profiler")
-    if(cmd_sys_pro)
-      execute_process(COMMAND ${cmd_sys_pro} OUTPUT_VARIABLE info)
-      string(REGEX REPLACE "^.*Total Number Of Cores: ([0-9]+).*$" "\\1"
-        PROCESSOR_COUNT "${info}")
-    endif()
-  endif()
-
-  # Windows:
-  if(WIN32)
-    set(PROCESSOR_COUNT "$ENV{NUMBER_OF_PROCESSORS}")
-  endif()
-endif()
-
-set(CTEST_BUILD_FLAGS "-j${PROCESSOR_COUNT}")
-
 
 ctest_start(matrix)
 ctest_empty_binary_directory(${CTEST_BINARY_DIRECTORY})
-ctest_configure( BUILD "${CTEST_BINARY_DIRECTORY}" OPTIONS -DENABLE_TESTING=ON )
+ctest_configure( BUILD "${CTEST_BINARY_DIRECTORY}" OPTIONS -DSC_ENABLE_TESTING=ON )
 ctest_build( BUILD "${CTEST_BINARY_DIRECTORY}" )
 message("running tests")
-ctest_test( BUILD "${CTEST_BINARY_DIRECTORY}" PARALLEL_LEVEL ${PROCESSOR_COUNT}
-                        INCLUDE_LABEL "cpp_schema_....*" )
+ctest_test( BUILD "${CTEST_BINARY_DIRECTORY}" INCLUDE_LABEL "cpp_schema_....*" )
 
 message("running python script")
 execute_process( COMMAND python ../misc/wiki-scripts/update-matrix.py

data/CMakeLists.txt

@@ -1,25 +1,32 @@
+# To build one or more schemas, configure with
+# 'cmake -DSC_BUILD_SCHEMAS="path/to/schema.exp;path/to/schema2.exp"
 
-#this sets a property so that the target doesn't get built by 'make' or 'make all'
-#useful when testing generation of schema code/compiling schem libs/etc
-FUNCTION( TESTABLE_TARGET target )
-    if(ENABLE_TESTING)
-        set_target_properties( ${target} PROPERTIES EXCLUDE_FROM_ALL ON )
-    endif()
-ENDFUNCTION( TESTABLE_TARGET )
+MACRO(RELATIVE_PATH_TO_TOPLEVEL current_dir rel_path)
+       string(REPLACE "${SC_SOURCE_DIR}" "" subpath "${current_dir}")
+       string(REGEX REPLACE "^/" "" subpath "${subpath}")
+       string(LENGTH "${subpath}" PATH_LENGTH)
+       if(PATH_LENGTH GREATER 0)
+               set(${rel_path} "..")
+               get_filename_component(subpath "${subpath}" PATH)
+               string(LENGTH "${subpath}" PATH_LENGTH)
+               while(PATH_LENGTH GREATER 0)
+                       set(${rel_path} "${${rel_path}}/..")
+                       get_filename_component(subpath "${subpath}" PATH)
+                       string(LENGTH "${subpath}" PATH_LENGTH)
+               endwhile(PATH_LENGTH GREATER 0)
+       endif(PATH_LENGTH GREATER 0)
+ENDMACRO(RELATIVE_PATH_TO_TOPLEVEL current_dir rel_path)
 
-# To build one or more schemas, configure with 
-# 'cmake -DBUILD_SCHEMAS="path/to/schema.exp;path/to/schema2.exp"
-
-# This function runs fedex on one express file. The generated source goes in a dir 
-# in the build dir, and it is compiled into a library. A p21read executable is 
+# This function runs fedex on one express file. The generated source goes in a dir
+# in the build dir, and it is compiled into a library. A p21read executable is
 # compiled and linked to the lib. p21read is used to test the lib.
 FUNCTION(BUILD_A_SCHEMA SCHEMA_FILE)
-    if( EXISTS "${CMAKE_BINARY_DIR}/${SCHEMA_FILE}" )  #try absolute path. if that fails, must already be absolute.
+    if( EXISTS "${CMAKE_BINARY_DIR}/${SCHEMA_FILE}" )  #is it a path relative to build dir?
         set( SCHEMA_FILE "${CMAKE_BINARY_DIR}/${SCHEMA_FILE}" )
-    else()
-        if( NOT EXISTS ${SCHEMA_FILE} )
-            message( FATAL_ERROR "Cannot find ${CMAKE_BINARY_DIR}/${SCHEMA_FILE} or ${SCHEMA_FILE}")
-        endif()
+    elseif( EXISTS "${SC_SOURCE_DIR}/data/${SCHEMA_FILE}" )  # path relative to STEPcode/data?
+        set( SCHEMA_FILE "${SC_SOURCE_DIR}/data/${SCHEMA_FILE}" )
+    elseif( NOT EXISTS ${SCHEMA_FILE} ) # absolute path
+        message( FATAL_ERROR "Cannot find ${CMAKE_BINARY_DIR}/${SCHEMA_FILE} or ${SC_SOURCE_DIR}/data/${SCHEMA_FILE} or ${SCHEMA_FILE}" )
     endif()
 
     if( IS_DIRECTORY ${SCHEMA_FILE} ) #if it is a dir, look for one .exp file inside
@@ -36,10 +43,10 @@ FUNCTION(BUILD_A_SCHEMA SCHEMA_FILE)
     string(TOUPPER ${SCHEMA_N} SCHEMA_LONG_NAME) #fedex_plus always uses upper case for file names
     get_filename_component( SCHEMA_SN ${SCHEMA_FILE} NAME )
     string( REGEX REPLACE "\(.*\).[Ee][Xx][Pp]" "\\1" SCHEMA_SHORT_NAME ${SCHEMA_SN} )
-    
+
     project( sdai_${SCHEMA_SHORT_NAME} )
     message( STATUS "Generating code for ${SCHEMA_SHORT_NAME}.")
-    set( SCHEMA_OUTPUT_DIR ${CMAKE_BINARY_DIR}/${SCHEMA_SHORT_NAME} )
+    set( SCHEMA_OUTPUT_DIR ${CMAKE_CURRENT_BINARY_DIR}/${SCHEMA_SHORT_NAME} )
 
     #the names of the files that will be generated
     set( FEDEX_OUT ${SCHEMA_OUTPUT_DIR}/compstructs.cc ${SCHEMA_OUTPUT_DIR}/Sdaiclasses.h
@@ -51,11 +58,11 @@ FUNCTION(BUILD_A_SCHEMA SCHEMA_FILE)
     # multiple schemas, each one will use the include dirs from all previous schemas. Since
     # one header (schema.h) is always named the same, this will not work. only workaround
     # seems to be set_target_properties( <target> PROPERTIES COMPILE_FLAGS <flags> )
-    set( ${PROJECT_NAME}_COMPILE_FLAGS "-I${CMAKE_CURRENT_SOURCE_DIR} -I${SCL_SOURCE_DIR}/src/cldai -I${SCL_SOURCE_DIR}/src/cleditor -I${SCL_SOURCE_DIR}/src/clutils -I${SCHEMA_OUTPUT_DIR} -I${SCL_SOURCE_DIR}/src/clstepcore" )
+    set( ${PROJECT_NAME}_COMPILE_FLAGS "-I${CMAKE_CURRENT_SOURCE_DIR} -I${SC_SOURCE_DIR}/src/cldai -I${SC_SOURCE_DIR}/src/cleditor -I${SC_SOURCE_DIR}/src/clutils -I${SCHEMA_OUTPUT_DIR} -I${SC_SOURCE_DIR}/src/clstepcore -I${SC_SOURCE_DIR}/src/base" )
 
     add_custom_target( generate_cpp_${SCHEMA_SHORT_NAME} SOURCES ${FEDEX_OUT} )
     add_custom_command( OUTPUT ${SCHEMA_OUTPUT_DIR}
-                        COMMAND cmake ARGS -E make_directory ${SCHEMA_OUTPUT_DIR}
+                        COMMAND ${CMAKE_COMMAND} ARGS -E make_directory ${SCHEMA_OUTPUT_DIR}
                         COMMENT "Creating ${SCHEMA_OUTPUT_DIR} for schema ${SCHEMA_SHORT_NAME}")
     add_custom_command( OUTPUT ${FEDEX_OUT}
                         COMMAND fedex_plus ARGS ${SCHEMA_FILE}
@@ -63,23 +70,23 @@ FUNCTION(BUILD_A_SCHEMA SCHEMA_FILE)
                         WORKING_DIRECTORY ${SCHEMA_OUTPUT_DIR}
                         COMMENT "Running fedex_plus for ${SCHEMA_SHORT_NAME}..."
                         VERBATIM )
-    if(MSVC OR BORLAND)
-        add_definitions( -DSCL_SCHEMA_DLL_EXPORTS )
-        add_definitions( -DSCL_EXPRESS_DLL_IMPORTS )
-		add_definitions( -DSCL_UTILS_DLL_IMPORTS )
-        add_definitions( -DSCL_DAI_DLL_IMPORTS )
-        add_definitions( -DSCL_CORE_DLL_IMPORTS )
-        add_definitions( -DSCL_EDITOR_DLL_IMPORTS )
-    endif()
-    add_library( ${PROJECT_NAME} SHARED ${FEDEX_OUT} )
-    target_link_libraries(${PROJECT_NAME} stepdai stepcore express stepeditor steputils )
+
+    if( SC_ENABLE_COVERAGE AND NOT SC_COVER_SCHEMAS )
+      # Coverage will always be sparse on schema libs. Compiling the libs with the -fprofile-arcs and
+      # -ftest-coverage is extremely slow. We can avoid that by temporarily changing build type to release.
+      set( PREV_BUILD_TYPE ${CMAKE_BUILD_TYPE} )
+      set( CMAKE_BUILD_TYPE "Release" )
+    endif( SC_ENABLE_COVERAGE AND NOT SC_COVER_SCHEMAS )
+
+    # if testing is enabled, "TESTABLE" sets property EXCLUDE_FROM_ALL and prevents installation
+    SC_ADDLIB( ${PROJECT_NAME} "${FEDEX_OUT}" "stepdai;stepcore;express;stepeditor;steputils;base" "TESTABLE" )
     add_dependencies( ${PROJECT_NAME} generate_cpp_${SCHEMA_SHORT_NAME} )
     set_target_properties( ${PROJECT_NAME} PROPERTIES COMPILE_FLAGS
                            ${${PROJECT_NAME}_COMPILE_FLAGS} )
-    if(APPLE)
-        set_target_properties(${PROJECT_NAME} PROPERTIES LINK_FLAGS "-flat_namespace -undefined suppress")
-    endif(APPLE)
-    TESTABLE_TARGET( ${PROJECT_NAME} )
+
+    if( SC_ENABLE_COVERAGE AND NOT SC_COVER_SCHEMAS )
+      set( CMAKE_BUILD_TYPE ${PREV_BUILD_TYPE} )
+    endif( SC_ENABLE_COVERAGE AND NOT SC_COVER_SCHEMAS )
 
     add_test( NAME generate_cpp_${SCHEMA_SHORT_NAME}
               WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
@@ -91,40 +98,77 @@ FUNCTION(BUILD_A_SCHEMA SCHEMA_FILE)
               COMMAND ${CMAKE_COMMAND} --build .
                                        --target p21read_${PROJECT_NAME}
                                        --config $<CONFIGURATION> )
+   if(NOT WIN32)
+    add_test( NAME build_lazy_cpp_${PROJECT_NAME}
+              WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+              COMMAND ${CMAKE_COMMAND} --build .
+                                       --target lazy_${PROJECT_NAME}
+                                       --config $<CONFIGURATION> )
+   endif(NOT WIN32)
 
     # label the tests and set dependencies
     set_tests_properties( generate_cpp_${SCHEMA_SHORT_NAME} PROPERTIES LABELS cpp_schema_gen )
-    set_tests_properties( build_cpp_${PROJECT_NAME} PROPERTIES DEPENDS generate_cpp_${SCHEMA_SHORT_NAME} LABELS cpp_schema_build )
+   if(NOT WIN32)
+    set_tests_properties( build_lazy_cpp_${PROJECT_NAME} build_cpp_${PROJECT_NAME} PROPERTIES DEPENDS generate_cpp_${SCHEMA_SHORT_NAME} LABELS cpp_schema_build )
+   endif(NOT WIN32)
 
-    if(MSVC OR BORLAND)
-        add_executable( p21read_${PROJECT_NAME} ${SCL_SOURCE_DIR}/src/test/p21read/p21read.cc ${SCL_SOURCE_DIR}/src/fedex_plus/xgetopt.cc )
-    else()
-        add_executable( p21read_${PROJECT_NAME} ${SCL_SOURCE_DIR}/src/test/p21read/p21read.cc )
-    endif()
+   RELATIVE_PATH_TO_TOPLEVEL(${CMAKE_CURRENT_SOURCE_DIR} RELATIVE_PATH_COMPONENT)
+   SC_ADDEXEC( p21read_${PROJECT_NAME} "${RELATIVE_PATH_COMPONENT}/src/test/p21read/p21read.cc" "${PROJECT_NAME};base" "TESTABLE" )
+   if(NOT WIN32)
+    SC_ADDEXEC( lazy_${PROJECT_NAME} "${RELATIVE_PATH_COMPONENT}/src/cllazyfile/lazy_test.cc" "${PROJECT_NAME};steplazyfile;stepeditor" "TESTABLE" )
+   endif(NOT WIN32)
     add_dependencies( p21read_${PROJECT_NAME} version_string )
-    target_link_libraries( p21read_${PROJECT_NAME} ${PROJECT_NAME} )
+   if(NOT WIN32)
+    add_dependencies( lazy_${PROJECT_NAME} version_string )
+   endif(NOT WIN32)
     set_target_properties( p21read_${PROJECT_NAME} PROPERTIES COMPILE_FLAGS
                            ${${PROJECT_NAME}_COMPILE_FLAGS} )
-    TESTABLE_TARGET( p21read_${PROJECT_NAME} )
+   if(NOT WIN32)
+    set_target_properties( lazy_${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${${PROJECT_NAME}_COMPILE_FLAGS} -I${SC_SOURCE_DIR}/src/base/judy/src" )
+   endif(NOT WIN32)
+
+
+    #add user-defined executables
+    foreach( src ${SC_SDAI_ADDITIONAL_EXES_SRCS} )
+        get_filename_component( name ${src} NAME_WE )
+        get_filename_component( path ${src} ABSOLUTE )
+        SC_ADDEXEC( ${name}_${PROJECT_NAME} "${src}" "${PROJECT_NAME};base" "TESTABLE" )
+        add_dependencies( ${name}_${PROJECT_NAME} version_string )
+        set_target_properties( ${name}_${PROJECT_NAME} PROPERTIES COMPILE_FLAGS
+                               "${${PROJECT_NAME}_COMPILE_FLAGS} -I${path}" )
+    endforeach( src ${SC_SDAI_ADDITIONAL_EXES_SRCS} )
 
     #find all part 21 files in schema dir, add a test for each one
     get_filename_component( SCHEMA_DIR ${SCHEMA_FILE} PATH )
-    file( GLOB_RECURSE P21_FILES ${SCHEMA_DIR}/*.stp ${SCHEMA_DIR}/*.step ${SCHEMA_DIR}/*.p21 )
+    file( GLOB_RECURSE P21_FILES ${SCHEMA_DIR}/*.stp ${SCHEMA_DIR}/*.step ${SCHEMA_DIR}/*.p21 ${SCHEMA_DIR}/*.ifc )
     foreach( TEST_FILE ${P21_FILES} )
     get_filename_component( FNAME ${TEST_FILE} NAME_WE )
         add_test( NAME read_write_cpp_${SCHEMA_SHORT_NAME}_${FNAME}
                   WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
                   COMMAND p21read_${PROJECT_NAME} ${TEST_FILE} )
         set_tests_properties( read_write_cpp_${SCHEMA_SHORT_NAME}_${FNAME} PROPERTIES DEPENDS build_cpp_${PROJECT_NAME} LABELS cpp_schema_rw )
+       if(NOT WIN32)
+        add_test( NAME read_lazy_cpp_${SCHEMA_SHORT_NAME}_${FNAME}
+                  WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+                  COMMAND lazy_${PROJECT_NAME} ${TEST_FILE} )
+        set_tests_properties( read_lazy_cpp_${SCHEMA_SHORT_NAME}_${FNAME} PROPERTIES DEPENDS build_lazy_cpp_${PROJECT_NAME} LABELS cpp_schema_rw )
+       endif(NOT WIN32)
     endforeach()
 
 ENDFUNCTION(BUILD_A_SCHEMA)
 
-if( DEFINED BUILD_SCHEMAS )
-    if( BUILD_SCHEMAS STREQUAL "ALL" )
-        file( GLOB_RECURSE BUILD_SCHEMAS ${SCL_SOURCE_DIR}/data/*.exp )
+#----------------------------------------------------------------------------------------------------
+
+if( DEFINED SC_BUILD_SCHEMAS )
+    foreach( src ${SC_SDAI_ADDITIONAL_EXES_SRCS} )
+        get_filename_component( name ${src} NAME_WE )
+        message( STATUS "Additional SDAI executable: ${name}" )
+    endforeach( src ${SC_SDAI_ADDITIONAL_EXES_SRCS} )
+
+    if( SC_BUILD_SCHEMAS STREQUAL "ALL" )
+        file( GLOB_RECURSE SC_BUILD_SCHEMAS ${SC_SOURCE_DIR}/data/*.exp )
     endif()
-    foreach( ap ${BUILD_SCHEMAS} )
+    foreach( ap ${SC_BUILD_SCHEMAS} )
         BUILD_A_SCHEMA( ${ap} )
     endforeach()
 endif()

data/cd209/ATS1-out.stp

@@ -0,0 +1,364 @@
+ISO-10303-21;
+HEADER;
+
+/******************************************************************************************
+* STEP Physical File produced by: The EXPRESS Data Manager Version 5.01.0100.b03 SimDM : 25 Apr 2012
+* Module:                         EDMstepFileFactory/EDMstandAlone
+* Creation date:                  Mon Jul 09 12:24:22 2012
+* Host:                           AER4WA926171Z
+* Database:                       C:\Documents and Settings\johnsjc2\Desktop\AP209\SimDM2010\DevCM\db\d
+* Database version:               5207
+* Database creation date:         Wed Apr 18 15:33:55 2012
+* Schema:                         AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF
+* Model:                          DataRepository.FemTest
+* Model creation date:            Mon Jul 09 12:24:22 2012
+* Header model:                   
+* EDMuser:                        superuser
+* EDMgroup:                       
+* License ID and type:            5565 : Project license. Expiry date: 31 Dec 2012
+* EDMstepFileFactory options:     010000000
+******************************************************************************************/
+
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME(
+'C:\\Documents and Settings\\johnsjc2\\Desktop\\AP209\\SimDM2010\\DevCM\\db\\d.DataRepository.FemTest'
+
+,
+          '2012-07-09T12:24:22',
+          ('ANONYMOUS USER'),
+          ('ANONYMOUS ORGANISATION'),
+          'The EXPRESS Data Manager Version 5.01.0100.b03 SimDM : 25 Apr 2012',
+          '',
+          '');
+FILE_SCHEMA(('AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF'));
+ENDSEC;
+
+DATA;
+#637538235= APPLICATION_CONTEXT('SimDM');
+#637538237= PRODUCT_DEFINITION_CONTEXT('assembly definition',#637538235,
+'life cycle stage');
+#637538239= PRODUCT_DEFINITION('default-id.0',$,#637538240,#637538244);
+#637538240= PRODUCT_DEFINITION_FORMATION('default-id.0','',#637538241);
+#637538241= PRODUCT('default-id.0','default-fea-part','',(#637538243));
+#637538243= PRODUCT_CONTEXT('design_context',#637538235,'design_context'
+);
+#637538244= PRODUCT_DEFINITION_CONTEXT(
+'product_definition_context_name_1',#637538245,'ANALYSIS-STAGE');
+#637538245= APPLICATION_CONTEXT('FEA-ANALYSIS-DOMAIN');
+#637538247= PRODUCT_DEFINITION_SHAPE('name',$,#637538239);
+#637538248= SHAPE_DEFINITION_REPRESENTATION(#637538247,#637538249);
+#637538249= POINT_REPRESENTATION('point_representation_name_1',(
+#637538251,#637538359),#637538257);
+#637538251= NODE_SET('node_set_name_1',(#637538253,#637538295,#637538299
+,#637538303,#637538307,#637538311,#637538315,#637538319,#637538323,
+#637538327,#637538331,#637538335,#637538339,#637538343,#637538347,
+#637538351,#637538355));
+#637538253= NODE('1',(#637538255),#637538257,#637538282);
+#637538255= CARTESIAN_POINT('1',(0.,-2.,1.));
+#637538257= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538260,#637538268,#637538271,#637538265,#637538263,#637538274,
+#637538275,#637538278,#637538281,#637538267))REPRESENTATION_CONTEXT(
+'CORD2R.1','3d'));
+#637538260= SI_ENERGY_UNIT((#637538262,#637538264,#637538266),*,$,
+.JOULE.);
+#637538262= DERIVED_UNIT_ELEMENT(#637538263,1.);
+#637538263= /* MASS_UNIT+SI_UNIT */(MASS_UNIT()NAMED_UNIT(*)SI_UNIT(
+.KILO.,.GRAM.));
+#637538264= DERIVED_UNIT_ELEMENT(#637538265,2.);
+#637538265= /* LENGTH_UNIT+SI_UNIT */(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(
+$,.METRE.));
+#637538266= DERIVED_UNIT_ELEMENT(#637538267,-2.);
+#637538267= /* SI_UNIT+TIME_UNIT */(NAMED_UNIT(*)SI_UNIT($,.SECOND.)
+TIME_UNIT());
+#637538268= SI_FORCE_UNIT((#637538262,#637538270,#637538266),*,$,
+.NEWTON.);
+#637538270= DERIVED_UNIT_ELEMENT(#637538265,1.);
+#637538271= SI_FREQUENCY_UNIT((#637538273),*,$,.HERTZ.);
+#637538273= DERIVED_UNIT_ELEMENT(#637538267,-1.);
+#637538274= /* PLANE_ANGLE_UNIT+SI_UNIT */(NAMED_UNIT(*)PLANE_ANGLE_UNIT
+()SI_UNIT($,.RADIAN.));
+#637538275= SI_POWER_UNIT((#637538262,#637538264,#637538277),*,$,.WATT.
+);
+#637538277= DERIVED_UNIT_ELEMENT(#637538267,-3.);
+#637538278= SI_PRESSURE_UNIT((#637538262,#637538280,#637538266),*,$,
+.PASCAL.);
+#637538280= DERIVED_UNIT_ELEMENT(#637538265,-1.);
+#637538281= /* SI_UNIT+THERMODYNAMIC_TEMPERATURE_UNIT */(NAMED_UNIT(*)
+SI_UNIT($,.DEGREE_CELSIUS.)THERMODYNAMIC_TEMPERATURE_UNIT());
+#637538282= FEA_MODEL_3D('Identification',(#637538284),#637538291,
+'NASTRAN BDF Converter v0.0.0',('NASTRAN'),'AnalysisModelType');
+#637538284= FEA_AXIS2_PLACEMENT_3D('0',#637538285,#637538287,#637538289,
+.CARTESIAN.,'FEA_BASIC_COORD_SYSTEM.0');
+#637538285= CARTESIAN_POINT('',(0.,0.,0.));
+#637538287= DIRECTION('AxisZ',(0.,0.,1.));
+#637538289= DIRECTION('RefX',(1.,0.,0.));
+#637538291= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538260,#637538268,#637538271,#637538265,#637538263,#637538274,
+#637538275,#637538278,#637538281,#637538267))REPRESENTATION_CONTEXT(
+'FEA_BASIC_COORD_SYSTEM.0','3d'));
+#637538295= NODE('2',(#637538297),#637538257,#637538282);
+#637538297= CARTESIAN_POINT('2',(1.,-2.,1.));
+#637538299= NODE('3',(#637538301),#637538257,#637538282);
+#637538301= CARTESIAN_POINT('3',(2.,-2.,1.));
+#637538303= NODE('4',(#637538305),#637538257,#637538282);
+#637538305= CARTESIAN_POINT('4',(3.,-2.,1.));
+#637538307= NODE('5',(#637538309),#637538257,#637538282);
+#637538309= CARTESIAN_POINT('5',(4.,-2.,1.));
+#637538311= NODE('6',(#637538313),#637538257,#637538282);
+#637538313= CARTESIAN_POINT('6',(5.,-2.,1.));
+#637538315= NODE('7',(#637538317),#637538257,#637538282);
+#637538317= CARTESIAN_POINT('7',(6.,-2.,1.));
+#637538319= NODE('8',(#637538321),#637538257,#637538282);
+#637538321= CARTESIAN_POINT('8',(7.,-2.,1.));
+#637538323= NODE('9',(#637538325),#637538257,#637538282);
+#637538325= CARTESIAN_POINT('9',(8.,-2.,1.));
+#637538327= NODE('10',(#637538329),#637538257,#637538282);
+#637538329= CARTESIAN_POINT('10',(9.,-2.,1.));
+#637538331= NODE('11',(#637538333),#637538257,#637538282);
+#637538333= CARTESIAN_POINT('11',(10.,-2.,1.));
+#637538335= NODE('12',(#637538337),#637538257,#637538282);
+#637538337= CARTESIAN_POINT('12',(11.,-2.,1.));
+#637538339= NODE('13',(#637538341),#637538257,#637538282);
+#637538341= CARTESIAN_POINT('13',(12.,-2.,1.));
+#637538343= NODE('14',(#637538345),#637538257,#637538282);
+#637538345= CARTESIAN_POINT('14',(13.,-2.,1.));
+#637538347= NODE('15',(#637538349),#637538257,#637538282);
+#637538349= CARTESIAN_POINT('15',(14.,-2.,1.));
+#637538351= NODE('16',(#637538353),#637538257,#637538282);
+#637538353= CARTESIAN_POINT('16',(15.,-2.,1.));
+#637538355= NODE('17',(#637538357),#637538257,#637538282);
+#637538357= CARTESIAN_POINT('17',(16.,-2.,1.));
+#637538359= FEA_AXIS2_PLACEMENT_3D('1',#637538360,#637538362,#637538364,
+.CARTESIAN.,'CORD2R.1');
+#637538360= CARTESIAN_POINT('',(0.,0.,0.));
+#637538362= DIRECTION('AxisZ',(0.,0.,1.));
+#637538364= DIRECTION('RefX',(1.,0.,0.));
+#637538366= FEA_MODEL_DEFINITION('fea_model_definition_id_1',$,
+#637538247,.U.);
+#637538367= STRUCTURAL_RESPONSE_PROPERTY(
+'structural_response_property_id_1',$,#637538366);
+#637538368= STRUCTURAL_RESPONSE_PROPERTY_DEFINITION_REPRESENTATION(
+#637538367,#637538282);
+#637538369= NAME_ATTRIBUTE('',#637538239);
+#637538370= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538371,#637538372,(
+#637538239));
+#637538371= GROUP('default-gpvv-type',$);
+#637538372= CLASSIFICATION_ROLE('view_type',$);
+#637538374= APPLIED_IDENTIFICATION_ASSIGNMENT('default-id.0',#637538375,
+(#637538240,#637538239,#637538241));
+#637538375= IDENTIFICATION_ROLE('default-role',$);
+#637538377= APPLIED_ORGANIZATION_ASSIGNMENT(#637538378,#637538379,(
+#637538374));
+#637538378= ORGANIZATION($,'default-organization',$);
+#637538379= ORGANIZATION_ROLE('id context');
+#637538381= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538382,#637538383,(
+#637538374));
+#637538382= GROUP('id',$);
+#637538383= CLASSIFICATION_ROLE('',$);
+#637538385= APPLICATION_PROTOCOL_DEFINITION('status',
+'ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies'
+,2011,#637538235);
+#637538386= DESCRIPTION_ATTRIBUTE('SimDM',#637538235);
+#637538387= ID_ATTRIBUTE('SimDM',#637538235);
+#637538388= DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.);
+#637538389= PRODUCT_RELATED_PRODUCT_CATEGORY('document',$,());
+#637538391= PRODUCT_RELATED_PRODUCT_CATEGORY('product',$,(#637538241));
+#637538393= DESCRIPTION_ATTRIBUTE('',#637538245);
+#637538394= CARTESIAN_POINT('0',(0.,0.,0.));
+#637538396= DUMMY_NODE('0',(#637538394),#637538291,#637538282);
+#637538398= ITEM_DEFINED_TRANSFORMATION('','',#637538284,#637538359);
+#637538399= REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION('','',
+#637538282,#637538249,#637538398);
+#637538400= ELEMENT_MATERIAL('MAT1.1','Fea Material',(#637538402,
+#637538417,#637538422));
+#637538402= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538403,#637538405,
+#637538409);
+#637538403= MATERIAL_PROPERTY('MAT1.1.0',$,#637538404);
+#637538404= CHARACTERIZED_OBJECT('material_property',$);
+#637538405= REPRESENTATION('representation_id_2',(#637538407),#637538291
+);
+#637538407= FEA_LINEAR_ELASTICITY('',FEA_ISOTROPIC_SYMMETRIC_TENSOR4_3D(
+(10000000.,0.33)));
+#637538409= DATA_ENVIRONMENT('DATA_ENV','Property_conditions',(
+#637538411));
+#637538411= PROPERTY_DEFINITION_REPRESENTATION(#637538412,#637538414);
+#637538412= PROPERTY_DEFINITION('Material Property Definition',$,
+#637538413);
+#637538413= CHARACTERIZED_OBJECT('property',$);
+#637538414= REPRESENTATION('representation_id_1',(#637538416),#637538291
+);
+#637538416= MEASURE_REPRESENTATION_ITEM('representation_item_name_1',
+CONTEXT_DEPENDENT_MEASURE(70.),#637538281);
+#637538417= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538418,#637538419,
+#637538409);
+#637538418= MATERIAL_PROPERTY('MAT1.1.1',$,#637538404);
+#637538419= REPRESENTATION('representation_id_3',(#637538421),#637538291
+);
+#637538421= FEA_MASS_DENSITY('',0.000254);
+#637538422= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538423,#637538424,
+#637538409);
+#637538423= MATERIAL_PROPERTY('MAT1.1.2',$,#637538404);
+#637538424= REPRESENTATION('representation_id_4',(#637538426),#637538291
+);
+#637538426= FEA_TANGENTIAL_COEFFICIENT_OF_LINEAR_THERMAL_EXPANSION('',
+ISOTROPIC_SYMMETRIC_TENSOR2_3D(0.));
+#637538427= CURVE_3D_ELEMENT_REPRESENTATION('16',(#637538429,#637538433)
+,#637538435,(#637538351,#637538355),#637538282,#637538439,#637538443,
+#637538400);
+#637538429= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538430
+);
+#637538430= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538431);
+#637538431= DIRECTION('undefined',(1.,0.,0.));
+#637538433= FEA_PARAMETRIC_POINT('',(1.,0.,0.));
+#637538435= PARAMETRIC_REPRESENTATION_CONTEXT(
+'parametric_representation_context','parametric');
+#637538439= CURVE_3D_ELEMENT_DESCRIPTOR(.LINEAR.,'LINEAR_CURVE.CROD',((
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.AXIAL.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.TORSION.))));
+#637538443= CURVE_3D_ELEMENT_PROPERTY('PROD.1','',(#637538445),(
+#637538456,#637538458),(#637538461,#637538464));
+#637538445= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538446,#637538447,
+#637538449);
+#637538446= CURVE_ELEMENT_LOCATION(#637538433);
+#637538447= EULER_ANGLES((0.,0.,0.));
+#637538449= CURVE_ELEMENT_SECTION_DERIVED_DEFINITIONS('',0.,8.,(
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)),(0.,0.,0.),
+0.,CONTEXT_DEPENDENT_MEASURE(0.),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.));
+#637538456= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538458= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538461= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538463));
+#637538463= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.NONE.),0.);
+#637538464= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538463));
+#637538466= CURVE_3D_ELEMENT_REPRESENTATION('15',(#637538429,#637538433)
+,#637538435,(#637538347,#637538351),#637538282,#637538439,#637538443,
+#637538400);
+#637538469= CURVE_3D_ELEMENT_REPRESENTATION('14',(#637538429,#637538433)
+,#637538435,(#637538343,#637538347),#637538282,#637538439,#637538443,
+#637538400);
+#637538472= CURVE_3D_ELEMENT_REPRESENTATION('13',(#637538429,#637538433)
+,#637538435,(#637538339,#637538343),#637538282,#637538439,#637538443,
+#637538400);
+#637538475= CURVE_3D_ELEMENT_REPRESENTATION('12',(#637538429,#637538433)
+,#637538435,(#637538335,#637538339),#637538282,#637538439,#637538443,
+#637538400);
+#637538478= CURVE_3D_ELEMENT_REPRESENTATION('11',(#637538429,#637538433)
+,#637538435,(#637538331,#637538335),#637538282,#637538439,#637538443,
+#637538400);
+#637538481= CURVE_3D_ELEMENT_REPRESENTATION('10',(#637538429,#637538433)
+,#637538435,(#637538327,#637538331),#637538282,#637538439,#637538443,
+#637538400);
+#637538484= CURVE_3D_ELEMENT_REPRESENTATION('9',(#637538429,#637538433),
+#637538435,(#637538323,#637538327),#637538282,#637538439,#637538443,
+#637538400);
+#637538487= CURVE_3D_ELEMENT_REPRESENTATION('8',(#637538429,#637538433),
+#637538435,(#637538319,#637538323),#637538282,#637538439,#637538443,
+#637538400);
+#637538490= CURVE_3D_ELEMENT_REPRESENTATION('7',(#637538429,#637538433),
+#637538435,(#637538315,#637538319),#637538282,#637538439,#637538443,
+#637538400);
+#637538493= CURVE_3D_ELEMENT_REPRESENTATION('6',(#637538429,#637538433),
+#637538435,(#637538311,#637538315),#637538282,#637538439,#637538443,
+#637538400);
+#637538496= CURVE_3D_ELEMENT_REPRESENTATION('5',(#637538429,#637538433),
+#637538435,(#637538307,#637538311),#637538282,#637538439,#637538443,
+#637538400);
+#637538499= CURVE_3D_ELEMENT_REPRESENTATION('4',(#637538429,#637538433),
+#637538435,(#637538303,#637538307),#637538282,#637538439,#637538443,
+#637538400);
+#637538502= CURVE_3D_ELEMENT_REPRESENTATION('3',(#637538429,#637538433),
+#637538435,(#637538299,#637538303),#637538282,#637538439,#637538443,
+#637538400);
+#637538505= CURVE_3D_ELEMENT_REPRESENTATION('2',(#637538429,#637538433),
+#637538435,(#637538295,#637538299),#637538282,#637538439,#637538443,
+#637538400);
+#637538508= CURVE_3D_ELEMENT_REPRESENTATION('1',(#637538429,#637538433),
+#637538435,(#637538253,#637538295),#637538282,#637538439,#637538443,
+#637538400);
+#637538511= ID_ATTRIBUTE('MAT1.1',#637538412);
+#637538512= DESCRIPTION_ATTRIBUTE('Elasticity',#637538402);
+#637538513= DESCRIPTION_ATTRIBUTE('MassDensity',#637538417);
+#637538514= DESCRIPTION_ATTRIBUTE('TangentCTE',#637538422);
+#637538515= CONTROL(#637538282,'Control.0','FemConvert',
+'MSC.NASTRAN JOB CREATED ON 06-JUL-00 AT 06:14:07',('<SOL>101</SOL>',
+'TIME 600','CEND','<GLOBALCASE>0</GLOBALCASE>','<SUBCASE>1</SUBCASE>',
+'ENDDATA 8336E13E'),('NASTRAN'));
+#637538518= CONTROL_LINEAR_STATIC_ANALYSIS_STEP(#637538515,
+'STATIC STEP 1',1,#637538519,'',#637538520);
+#637538519= SPECIFIED_STATE('STEP DEFAULT','default_initial_state');
+#637538520= CONTROL_LINEAR_STATIC_LOAD_INCREMENT_PROCESS('STATIC STEP 1'
+,'',#637538521);
+#637538521= SPECIFIED_STATE('Step 1 Base Specified State',
+'Relating Specified State');
+#637538522= OUTPUT_REQUEST_STATE('Step 1 Output Request State','',(
+#637538518));
+#637538524= NODAL_FREEDOM_VALUES(#637538522,#637538525,#637538284,
+#637538527,(UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.)));
+#637538525= NODE_GROUP('','ALL',#637538282,(#637538253,#637538295,
+#637538299,#637538303,#637538307,#637538311,#637538315,#637538319,
+#637538323,#637538327,#637538331,#637538335,#637538339,#637538343,
+#637538347,#637538351,#637538355));
+#637538527= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.X_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(.Z_ROTATION.)));
+#637538530= SINGLE_POINT_CONSTRAINT_ELEMENT('SPC1_1.0',(#637538518),
+#637538253,#637538284,(#637538533,#637538534,#637538535),'');
+#637538533= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.X_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538534= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538535= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Z_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538536= SINGLE_POINT_CONSTRAINT_ELEMENT_VALUES(#637538537,#637538530
+,#637538538,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)
+,CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538537= SPECIFIED_STATE('SPCVALSTATE_1_2','');
+#637538538= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.)));
+#637538541= SPECIFIED_STATE('SPCCASE_2_2_1','Aggregator SPC 2 Step 1');
+#637538542= STATE_RELATIONSHIP(
+'SPCCASE_2_2_1 is related to Step 1 Base Specified State','',#637538521,
+#637538541);
+#637538543= STATE_RELATIONSHIP(
+'SPCVALSTATE_1_2 is related to SPCCASE_2_2_1','',#637538541,#637538537);
+#637538544= LINEARLY_SUPERIMPOSED_STATE('LOADSTATECOMBINATION_2',
+'Overall Factor Combined State');
+#637538546= STATE_RELATIONSHIP(
+'LOADSTATECOMBINATION_2 is related to Step 1 Base Specified State','',
+#637538521,#637538544);
+#637538547= STATE_COMPONENT('OverallComp','',#637538544,1.);
+#637538549= STATE_RELATIONSHIP(
+'LOADSTATEITEM_1 is related to OverallComp','',#637538547,#637538550);
+#637538550= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_1',
+'Item Factor State');
+#637538551= SPECIFIED_STATE('LOADSTATECORE_1',
+'Core Loads Specified State');
+#637538552= STATE_RELATIONSHIP(
+'LOADSTATECORE_1 is related to ItemComp_2_1','',#637538553,#637538551);
+#637538553= STATE_COMPONENT('ItemComp_2_1','',#637538550,1.);
+#637538555= NODAL_FREEDOM_ACTION_DEFINITION(#637538551,#637538355,
+#637538284,#637538556,(CONTEXT_DEPENDENT_MEASURE(-1000.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538556= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.)));
+#637538559= ID_ATTRIBUTE('ALL',#637538525);
+ENDSEC;
+
+END-ISO-10303-21;

data/cd209/ATS1Mod0-out.stp

@@ -0,0 +1,385 @@
+ISO-10303-21;
+HEADER;
+
+/******************************************************************************************
+* STEP Physical File produced by: The EXPRESS Data Manager Version 5.01.0100.b04 : 12 Apr 2012
+* Module:                         EDMstepFileFactory/EDMstandAlone
+* Creation date:                  Tue Jun 05 10:29:55 2012
+* Host:                           AER4WA926171Z
+* Database:                       C:\Documents and Settings\johnsjc2\Desktop\AP209\SimDM2010\DevCM\db\d
+* Database version:               5207
+* Database creation date:         Wed Apr 18 15:33:55 2012
+* Schema:                         AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF
+* Model:                          DataRepository.FemTest
+* Model creation date:            Tue Jun 05 10:29:54 2012
+* Header model:                   
+* EDMuser:                        superuser
+* EDMgroup:                       
+* License ID and type:            5565 : Project license. Expiry date: 31 Dec 2012
+* EDMstepFileFactory options:     010000000
+******************************************************************************************/
+
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME(
+'C:\\Documents and Settings\\johnsjc2\\Desktop\\AP209\\SimDM2010\\DevCM\\db\\d.DataRepository.FemTest'
+
+,
+          '2012-06-05T10:29:55',
+          ('ANONYMOUS USER'),
+          ('ANONYMOUS ORGANISATION'),
+          'The EXPRESS Data Manager Version 5.01.0100.b04 : 12 Apr 2012',
+          '',
+          '');
+FILE_SCHEMA(('AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF'));
+ENDSEC;
+
+DATA;
+#637538233= APPLICATION_CONTEXT('SimDM');
+#637538235= PRODUCT_DEFINITION_CONTEXT('assembly definition',#637538233,
+'life cycle stage');
+#637538237= PRODUCT_DEFINITION('default-id.0',$,#637538238,#637538242);
+#637538238= PRODUCT_DEFINITION_FORMATION('default-id.0','',#637538239);
+#637538239= PRODUCT('default-id.0','default-fea-part','',(#637538241));
+#637538241= PRODUCT_CONTEXT('design_context',#637538233,'design_context'
+);
+#637538242= PRODUCT_DEFINITION_CONTEXT(
+'product_definition_context_name_1',#637538243,'ANALYSIS-STAGE');
+#637538243= APPLICATION_CONTEXT('FEA-ANALYSIS-DOMAIN');
+#637538245= PRODUCT_DEFINITION_SHAPE('name',$,#637538237);
+#637538246= SHAPE_DEFINITION_REPRESENTATION(#637538245,#637538247);
+#637538247= POINT_REPRESENTATION('point_representation_name_1',(
+#637538249,#637538357),#637538255);
+#637538249= NODE_SET('node_set_name_1',(#637538251,#637538293,#637538297
+,#637538301,#637538305,#637538309,#637538313,#637538317,#637538321,
+#637538325,#637538329,#637538333,#637538337,#637538341,#637538345,
+#637538349,#637538353));
+#637538251= NODE('1',(#637538253),#637538255,#637538280);
+#637538253= CARTESIAN_POINT('1',(0.,-2.,1.));
+#637538255= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538258,#637538266,#637538269,#637538263,#637538261,#637538272,
+#637538273,#637538276,#637538279,#637538265))REPRESENTATION_CONTEXT(
+'CORD2R.1','3d'));
+#637538258= SI_ENERGY_UNIT((#637538260,#637538262,#637538264),*,$,
+.JOULE.);
+#637538260= DERIVED_UNIT_ELEMENT(#637538261,1.);
+#637538261= /* MASS_UNIT+SI_UNIT */(MASS_UNIT()NAMED_UNIT(*)SI_UNIT(
+.KILO.,.GRAM.));
+#637538262= DERIVED_UNIT_ELEMENT(#637538263,2.);
+#637538263= /* LENGTH_UNIT+SI_UNIT */(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(
+$,.METRE.));
+#637538264= DERIVED_UNIT_ELEMENT(#637538265,-2.);
+#637538265= /* SI_UNIT+TIME_UNIT */(NAMED_UNIT(*)SI_UNIT($,.SECOND.)
+TIME_UNIT());
+#637538266= SI_FORCE_UNIT((#637538260,#637538268,#637538264),*,$,
+.NEWTON.);
+#637538268= DERIVED_UNIT_ELEMENT(#637538263,1.);
+#637538269= SI_FREQUENCY_UNIT((#637538271),*,$,.HERTZ.);
+#637538271= DERIVED_UNIT_ELEMENT(#637538265,-1.);
+#637538272= /* PLANE_ANGLE_UNIT+SI_UNIT */(NAMED_UNIT(*)PLANE_ANGLE_UNIT
+()SI_UNIT($,.RADIAN.));
+#637538273= SI_POWER_UNIT((#637538260,#637538262,#637538275),*,$,.WATT.
+);
+#637538275= DERIVED_UNIT_ELEMENT(#637538265,-3.);
+#637538276= SI_PRESSURE_UNIT((#637538260,#637538278,#637538264),*,$,
+.PASCAL.);
+#637538278= DERIVED_UNIT_ELEMENT(#637538263,-1.);
+#637538279= /* SI_UNIT+THERMODYNAMIC_TEMPERATURE_UNIT */(NAMED_UNIT(*)
+SI_UNIT($,.DEGREE_CELSIUS.)THERMODYNAMIC_TEMPERATURE_UNIT());
+#637538280= FEA_MODEL_3D('Identification',(#637538282),#637538289,
+'NASTRAN BDF Converter v0.0.0',('NASTRAN'),'AnalysisModelType');
+#637538282= FEA_AXIS2_PLACEMENT_3D('0',#637538283,#637538285,#637538287,
+.CARTESIAN.,'FEA_BASIC_COORD_SYSTEM.0');
+#637538283= CARTESIAN_POINT('',(0.,0.,0.));
+#637538285= DIRECTION('AxisZ',(0.,0.,1.));
+#637538287= DIRECTION('RefX',(1.,0.,0.));
+#637538289= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538258,#637538266,#637538269,#637538263,#637538261,#637538272,
+#637538273,#637538276,#637538279,#637538265))REPRESENTATION_CONTEXT(
+'FEA_BASIC_COORD_SYSTEM.0','3d'));
+#637538293= NODE('2',(#637538295),#637538255,#637538280);
+#637538295= CARTESIAN_POINT('2',(1.,-2.,1.));
+#637538297= NODE('3',(#637538299),#637538255,#637538280);
+#637538299= CARTESIAN_POINT('3',(2.,-2.,1.));
+#637538301= NODE('4',(#637538303),#637538255,#637538280);
+#637538303= CARTESIAN_POINT('4',(3.,-2.,1.));
+#637538305= NODE('5',(#637538307),#637538255,#637538280);
+#637538307= CARTESIAN_POINT('5',(4.,-2.,1.));
+#637538309= NODE('6',(#637538311),#637538255,#637538280);
+#637538311= CARTESIAN_POINT('6',(5.,-2.,1.));
+#637538313= NODE('7',(#637538315),#637538255,#637538280);
+#637538315= CARTESIAN_POINT('7',(6.,-2.,1.));
+#637538317= NODE('8',(#637538319),#637538255,#637538280);
+#637538319= CARTESIAN_POINT('8',(7.,-2.,1.));
+#637538321= NODE('9',(#637538323),#637538255,#637538280);
+#637538323= CARTESIAN_POINT('9',(8.,-2.,1.));
+#637538325= NODE('10',(#637538327),#637538255,#637538280);
+#637538327= CARTESIAN_POINT('10',(9.,-2.,1.));
+#637538329= NODE('11',(#637538331),#637538255,#637538280);
+#637538331= CARTESIAN_POINT('11',(10.,-2.,1.));
+#637538333= NODE('12',(#637538335),#637538255,#637538280);
+#637538335= CARTESIAN_POINT('12',(11.,-2.,1.));
+#637538337= NODE('13',(#637538339),#637538255,#637538280);
+#637538339= CARTESIAN_POINT('13',(12.,-2.,1.));
+#637538341= NODE('14',(#637538343),#637538255,#637538280);
+#637538343= CARTESIAN_POINT('14',(13.,-2.,1.));
+#637538345= NODE('15',(#637538347),#637538255,#637538280);
+#637538347= CARTESIAN_POINT('15',(14.,-2.,1.));
+#637538349= NODE('16',(#637538351),#637538255,#637538280);
+#637538351= CARTESIAN_POINT('16',(15.,-2.,1.));
+#637538353= NODE('17',(#637538355),#637538255,#637538280);
+#637538355= CARTESIAN_POINT('17',(16.,-2.,1.));
+#637538357= FEA_AXIS2_PLACEMENT_3D('1',#637538358,#637538360,#637538362,
+.CARTESIAN.,'CORD2R.1');
+#637538358= CARTESIAN_POINT('',(0.,0.,0.));
+#637538360= DIRECTION('AxisZ',(0.,0.,1.));
+#637538362= DIRECTION('RefX',(1.,0.,0.));
+#637538364= FEA_MODEL_DEFINITION('fea_model_definition_id_1',$,
+#637538245,.U.);
+#637538365= STRUCTURAL_RESPONSE_PROPERTY(
+'structural_response_property_id_1',$,#637538364);
+#637538366= STRUCTURAL_RESPONSE_PROPERTY_DEFINITION_REPRESENTATION(
+#637538365,#637538280);
+#637538367= NAME_ATTRIBUTE('',#637538237);
+#637538368= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538369,#637538370,(
+#637538237));
+#637538369= GROUP('default-gpvv-type',$);
+#637538370= CLASSIFICATION_ROLE('view_type',$);
+#637538372= APPLIED_IDENTIFICATION_ASSIGNMENT('default-id.0',#637538373,
+(#637538238,#637538237,#637538239));
+#637538373= IDENTIFICATION_ROLE('default-role',$);
+#637538375= APPLIED_ORGANIZATION_ASSIGNMENT(#637538376,#637538377,(
+#637538372));
+#637538376= ORGANIZATION($,'default-organization',$);
+#637538377= ORGANIZATION_ROLE('id context');
+#637538379= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538380,#637538381,(
+#637538372));
+#637538380= GROUP('id',$);
+#637538381= CLASSIFICATION_ROLE('',$);
+#637538383= APPLICATION_PROTOCOL_DEFINITION('status',
+'ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies'
+,2011,#637538233);
+#637538384= DESCRIPTION_ATTRIBUTE('SimDM',#637538233);
+#637538385= ID_ATTRIBUTE('SimDM',#637538233);
+#637538386= DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.);
+#637538387= PRODUCT_RELATED_PRODUCT_CATEGORY('document',$,());
+#637538389= PRODUCT_RELATED_PRODUCT_CATEGORY('product',$,(#637538239));
+#637538391= DESCRIPTION_ATTRIBUTE('',#637538243);
+#637538392= CARTESIAN_POINT('0',(0.,0.,0.));
+#637538394= DUMMY_NODE('0',(#637538392),#637538289,#637538280);
+#637538396= ITEM_DEFINED_TRANSFORMATION('','',#637538282,#637538357);
+#637538397= REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION('','',
+#637538280,#637538247,#637538396);
+#637538398= ELEMENT_MATERIAL('MAT1.1','Fea Material',(#637538400,
+#637538415,#637538420));
+#637538400= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538401,#637538403,
+#637538407);
+#637538401= MATERIAL_PROPERTY('MAT1.1.0',$,#637538402);
+#637538402= CHARACTERIZED_OBJECT('material_property',$);
+#637538403= REPRESENTATION('representation_id_2',(#637538405),#637538289
+);
+#637538405= FEA_LINEAR_ELASTICITY('',FEA_ISOTROPIC_SYMMETRIC_TENSOR4_3D(
+(10000000.,0.33)));
+#637538407= DATA_ENVIRONMENT('DATA_ENV','Property_conditions',(
+#637538409));
+#637538409= PROPERTY_DEFINITION_REPRESENTATION(#637538410,#637538412);
+#637538410= PROPERTY_DEFINITION('Material Property Definition',$,
+#637538411);
+#637538411= CHARACTERIZED_OBJECT('property',$);
+#637538412= REPRESENTATION('representation_id_1',(#637538414),#637538289
+);
+#637538414= MEASURE_REPRESENTATION_ITEM('representation_item_name_1',
+CONTEXT_DEPENDENT_MEASURE(70.),#637538279);
+#637538415= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538416,#637538417,
+#637538407);
+#637538416= MATERIAL_PROPERTY('MAT1.1.1',$,#637538402);
+#637538417= REPRESENTATION('representation_id_3',(#637538419),#637538289
+);
+#637538419= FEA_MASS_DENSITY('',0.000254);
+#637538420= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538421,#637538422,
+#637538407);
+#637538421= MATERIAL_PROPERTY('MAT1.1.2',$,#637538402);
+#637538422= REPRESENTATION('representation_id_4',(#637538424),#637538289
+);
+#637538424= FEA_TANGENTIAL_COEFFICIENT_OF_LINEAR_THERMAL_EXPANSION('',
+ISOTROPIC_SYMMETRIC_TENSOR2_3D(0.));
+#637538425= CURVE_3D_ELEMENT_REPRESENTATION('16',(#637538427,#637538431)
+,#637538433,(#637538349,#637538353),#637538280,#637538437,#637538441,
+#637538398);
+#637538427= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538428
+);
+#637538428= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538429);
+#637538429= DIRECTION('undefined',(1.,0.,0.));
+#637538431= FEA_PARAMETRIC_POINT('',(1.,0.,0.));
+#637538433= PARAMETRIC_REPRESENTATION_CONTEXT(
+'parametric_representation_context','parametric');
+#637538437= CURVE_3D_ELEMENT_DESCRIPTOR(.LINEAR.,'LINEAR_CURVE.CROD',((
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.AXIAL.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.TORSION.))));
+#637538441= CURVE_3D_ELEMENT_PROPERTY('PROD.1','',(#637538443),(
+#637538454,#637538456),(#637538459,#637538462));
+#637538443= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538444,#637538445,
+#637538447);
+#637538444= CURVE_ELEMENT_LOCATION(#637538431);
+#637538445= EULER_ANGLES((0.,0.,0.));
+#637538447= CURVE_ELEMENT_SECTION_DERIVED_DEFINITIONS('',0.,8.,(
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)),(0.,0.,0.),
+0.,CONTEXT_DEPENDENT_MEASURE(0.),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.));
+#637538454= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538456= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538459= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538461));
+#637538461= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.NONE.),0.);
+#637538462= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538461));
+#637538464= CURVE_3D_ELEMENT_REPRESENTATION('15',(#637538427,#637538431)
+,#637538433,(#637538345,#637538349),#637538280,#637538437,#637538441,
+#637538398);
+#637538467= CURVE_3D_ELEMENT_REPRESENTATION('14',(#637538427,#637538431)
+,#637538433,(#637538341,#637538345),#637538280,#637538437,#637538441,
+#637538398);
+#637538470= CURVE_3D_ELEMENT_REPRESENTATION('13',(#637538427,#637538431)
+,#637538433,(#637538337,#637538341),#637538280,#637538437,#637538441,
+#637538398);
+#637538473= CURVE_3D_ELEMENT_REPRESENTATION('12',(#637538427,#637538431)
+,#637538433,(#637538333,#637538337),#637538280,#637538437,#637538441,
+#637538398);
+#637538476= CURVE_3D_ELEMENT_REPRESENTATION('11',(#637538427,#637538431)
+,#637538433,(#637538329,#637538333),#637538280,#637538437,#637538441,
+#637538398);
+#637538479= CURVE_3D_ELEMENT_REPRESENTATION('10',(#637538427,#637538431)
+,#637538433,(#637538325,#637538329),#637538280,#637538437,#637538441,
+#637538398);
+#637538482= CURVE_3D_ELEMENT_REPRESENTATION('9',(#637538427,#637538431),
+#637538433,(#637538321,#637538325),#637538280,#637538437,#637538441,
+#637538398);
+#637538485= CURVE_3D_ELEMENT_REPRESENTATION('8',(#637538427,#637538431),
+#637538433,(#637538317,#637538321),#637538280,#637538437,#637538441,
+#637538398);
+#637538488= CURVE_3D_ELEMENT_REPRESENTATION('7',(#637538427,#637538431),
+#637538433,(#637538313,#637538317),#637538280,#637538437,#637538441,
+#637538398);
+#637538491= CURVE_3D_ELEMENT_REPRESENTATION('6',(#637538427,#637538431),
+#637538433,(#637538309,#637538313),#637538280,#637538437,#637538441,
+#637538398);
+#637538494= CURVE_3D_ELEMENT_REPRESENTATION('5',(#637538427,#637538431),
+#637538433,(#637538305,#637538309),#637538280,#637538437,#637538441,
+#637538398);
+#637538497= CURVE_3D_ELEMENT_REPRESENTATION('4',(#637538427,#637538431),
+#637538433,(#637538301,#637538305),#637538280,#637538437,#637538441,
+#637538398);
+#637538500= CURVE_3D_ELEMENT_REPRESENTATION('3',(#637538427,#637538431),
+#637538433,(#637538297,#637538301),#637538280,#637538437,#637538441,
+#637538398);
+#637538503= CURVE_3D_ELEMENT_REPRESENTATION('2',(#637538427,#637538431),
+#637538433,(#637538293,#637538297),#637538280,#637538437,#637538441,
+#637538398);
+#637538506= CURVE_3D_ELEMENT_REPRESENTATION('1',(#637538427,#637538431),
+#637538433,(#637538251,#637538293),#637538280,#637538437,#637538441,
+#637538398);
+#637538509= ID_ATTRIBUTE('MAT1.1',#637538410);
+#637538510= DESCRIPTION_ATTRIBUTE('Elasticity',#637538400);
+#637538511= DESCRIPTION_ATTRIBUTE('MassDensity',#637538415);
+#637538512= DESCRIPTION_ATTRIBUTE('TangentCTE',#637538420);
+#637538513= CONTROL(#637538280,'Control.0','FemConvert',
+'MSC.NASTRAN JOB CREATED ON 06-JUL-00 AT 06:14:07',('<SOL>101</SOL>',
+'TIME 600','CEND','<GLOBALCASE>0</GLOBALCASE>','<SUBCASE>1</SUBCASE>',
+'<SUBCASE>2</SUBCASE>','ENDDATA'),('NASTRAN'));
+#637538516= CONTROL_LINEAR_STATIC_ANALYSIS_STEP(#637538513,
+'STATIC STEP 2',2,#637538517,'',#637538518);
+#637538517= SPECIFIED_STATE('STEP DEFAULT','default_initial_state');
+#637538518= CONTROL_LINEAR_STATIC_LOAD_INCREMENT_PROCESS('STATIC STEP 2'
+,'',#637538519);
+#637538519= SPECIFIED_STATE('Step 2 Base Specified State',
+'Relating Specified State');
+#637538520= OUTPUT_REQUEST_STATE('Step 2 Output Request State','',(
+#637538516));
+#637538522= NODAL_FREEDOM_VALUES(#637538520,#637538523,#637538282,
+#637538525,(UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.)));
+#637538523= NODE_GROUP('','ALL',#637538280,(#637538251,#637538293,
+#637538297,#637538301,#637538305,#637538309,#637538313,#637538317,
+#637538321,#637538325,#637538329,#637538333,#637538337,#637538341,
+#637538345,#637538349,#637538353));
+#637538525= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.X_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(.Z_ROTATION.)));
+#637538528= SINGLE_POINT_CONSTRAINT_ELEMENT('SPC1_1.0',(#637538530,
+#637538516),#637538251,#637538282,(#637538534,#637538535,#637538536),''
+);
+#637538530= CONTROL_LINEAR_STATIC_ANALYSIS_STEP(#637538513,
+'STATIC STEP 1',1,#637538517,'',#637538531);
+#637538531= CONTROL_LINEAR_STATIC_LOAD_INCREMENT_PROCESS('STATIC STEP 1'
+,'',#637538532);
+#637538532= SPECIFIED_STATE('Step 1 Base Specified State',
+'Relating Specified State');
+#637538534= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.X_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538535= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538536= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Z_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538537= SINGLE_POINT_CONSTRAINT_ELEMENT_VALUES(#637538538,#637538528
+,#637538539,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)
+,CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538538= SPECIFIED_STATE('SPCVALSTATE_1_2','');
+#637538539= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.)));
+#637538542= SPECIFIED_STATE('SPCCASE_2_2_1','Aggregator SPC 2 Step 1');
+#637538543= STATE_RELATIONSHIP(
+'SPCCASE_2_2_1 is related to Step 1 Base Specified State','',#637538532,
+#637538542);
+#637538544= STATE_RELATIONSHIP(
+'SPCVALSTATE_1_2 is related to SPCCASE_2_2_1','',#637538542,#637538538);
+#637538545= LINEARLY_SUPERIMPOSED_STATE('LOADSTATECOMBINATION_2',
+'Overall Factor Combined State');
+#637538547= STATE_RELATIONSHIP(
+'LOADSTATECOMBINATION_2 is related to Step 2 Base Specified State','',
+#637538519,#637538545);
+#637538548= STATE_RELATIONSHIP(
+'LOADSTATECOMBINATION_2 is related to Step 1 Base Specified State','',
+#637538532,#637538545);
+#637538549= STATE_COMPONENT('OverallComp','',#637538545,1.);
+#637538551= STATE_RELATIONSHIP(
+'LOADSTATEITEM_1 is related to OverallComp','',#637538549,#637538552);
+#637538552= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_1',
+'Item Factor State');
+#637538553= SPECIFIED_STATE('LOADSTATECORE_1',
+'Core Loads Specified State');
+#637538554= STATE_RELATIONSHIP(
+'LOADSTATECORE_1 is related to ItemComp_2_1','',#637538555,#637538553);
+#637538555= STATE_COMPONENT('ItemComp_2_1','',#637538552,1.);
+#637538557= NODAL_FREEDOM_ACTION_DEFINITION(#637538553,#637538353,
+#637538282,#637538558,(CONTEXT_DEPENDENT_MEASURE(-1000.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538558= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.)));
+#637538561= OUTPUT_REQUEST_STATE('Step 1 Output Request State','',(
+#637538530));
+#637538563= NODAL_FREEDOM_VALUES(#637538561,#637538523,#637538282,
+#637538525,(UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.)));
+#637538565= ID_ATTRIBUTE('ALL',#637538523);
+#637538566= SPECIFIED_STATE('SPCCASE_2_2_2','Aggregator SPC 2 Step 2');
+#637538567= STATE_RELATIONSHIP(
+'SPCCASE_2_2_2 is related to Step 2 Base Specified State','',#637538519,
+#637538566);
+ENDSEC;
+
+END-ISO-10303-21;

data/cd209/ATS1Mod0-outresult.stp

@@ -0,0 +1,559 @@
+ISO-10303-21;
+HEADER;
+
+/******************************************************************************************
+* STEP Physical File produced by: The EXPRESS Data Manager Version 5.01.0100.b03 SimDM : 25 Apr 2012
+* Module:                         EDMstepFileFactory/EDMstandAlone
+* Creation date:                  Mon Jul 09 13:15:28 2012
+* Host:                           AER4WA926171Z
+* Database:                       C:\Documents and Settings\johnsjc2\Desktop\AP209\SimDM2010\DevCM\db\d
+* Database version:               5207
+* Database creation date:         Wed Apr 18 15:33:55 2012
+* Schema:                         AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF
+* Model:                          DataRepository.FemTest
+* Model creation date:            Mon Jul 09 13:15:28 2012
+* Header model:                   
+* EDMuser:                        superuser
+* EDMgroup:                       
+* License ID and type:            5565 : Project license. Expiry date: 31 Dec 2012
+* EDMstepFileFactory options:     010000000
+******************************************************************************************/
+
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME(
+'C:\\Documents and Settings\\johnsjc2\\Desktop\\AP209\\SimDM2010\\DevCM\\db\\d.DataRepository.FemTest'
+
+,
+          '2012-07-09T13:15:28',
+          ('ANONYMOUS USER'),
+          ('ANONYMOUS ORGANISATION'),
+          'The EXPRESS Data Manager Version 5.01.0100.b03 SimDM : 25 Apr 2012',
+          '',
+          '');
+FILE_SCHEMA(('AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF'));
+ENDSEC;
+
+DATA;
+#637538235= APPLICATION_CONTEXT('SimDM');
+#637538237= PRODUCT_DEFINITION_CONTEXT('assembly definition',#637538235,
+'life cycle stage');
+#637538239= PRODUCT_DEFINITION('default-id.0',$,#637538240,#637538244);
+#637538240= PRODUCT_DEFINITION_FORMATION('default-id.0','',#637538241);
+#637538241= PRODUCT('default-id.0','default-fea-part','',(#637538243));
+#637538243= PRODUCT_CONTEXT('design_context',#637538235,'design_context'
+);
+#637538244= PRODUCT_DEFINITION_CONTEXT(
+'product_definition_context_name_1',#637538245,'ANALYSIS-STAGE');
+#637538245= APPLICATION_CONTEXT('FEA-ANALYSIS-DOMAIN');
+#637538247= PRODUCT_DEFINITION_SHAPE('name',$,#637538239);
+#637538248= SHAPE_DEFINITION_REPRESENTATION(#637538247,#637538249);
+#637538249= POINT_REPRESENTATION('point_representation_name_1',(
+#637538251,#637538359),#637538257);
+#637538251= NODE_SET('node_set_name_1',(#637538253,#637538295,#637538299
+,#637538303,#637538307,#637538311,#637538315,#637538319,#637538323,
+#637538327,#637538331,#637538335,#637538339,#637538343,#637538347,
+#637538351,#637538355));
+#637538253= NODE('1',(#637538255),#637538257,#637538282);
+#637538255= CARTESIAN_POINT('1',(0.,-2.,1.));
+#637538257= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538260,#637538268,#637538271,#637538265,#637538263,#637538274,
+#637538275,#637538278,#637538281,#637538267))REPRESENTATION_CONTEXT(
+'CORD2R.1','3d'));
+#637538260= SI_ENERGY_UNIT((#637538262,#637538264,#637538266),*,$,
+.JOULE.);
+#637538262= DERIVED_UNIT_ELEMENT(#637538263,1.);
+#637538263= /* MASS_UNIT+SI_UNIT */(MASS_UNIT()NAMED_UNIT(*)SI_UNIT(
+.KILO.,.GRAM.));
+#637538264= DERIVED_UNIT_ELEMENT(#637538265,2.);
+#637538265= /* LENGTH_UNIT+SI_UNIT */(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(
+$,.METRE.));
+#637538266= DERIVED_UNIT_ELEMENT(#637538267,-2.);
+#637538267= /* SI_UNIT+TIME_UNIT */(NAMED_UNIT(*)SI_UNIT($,.SECOND.)
+TIME_UNIT());
+#637538268= SI_FORCE_UNIT((#637538262,#637538270,#637538266),*,$,
+.NEWTON.);
+#637538270= DERIVED_UNIT_ELEMENT(#637538265,1.);
+#637538271= SI_FREQUENCY_UNIT((#637538273),*,$,.HERTZ.);
+#637538273= DERIVED_UNIT_ELEMENT(#637538267,-1.);
+#637538274= /* PLANE_ANGLE_UNIT+SI_UNIT */(NAMED_UNIT(*)PLANE_ANGLE_UNIT
+()SI_UNIT($,.RADIAN.));
+#637538275= SI_POWER_UNIT((#637538262,#637538264,#637538277),*,$,.WATT.
+);
+#637538277= DERIVED_UNIT_ELEMENT(#637538267,-3.);
+#637538278= SI_PRESSURE_UNIT((#637538262,#637538280,#637538266),*,$,
+.PASCAL.);
+#637538280= DERIVED_UNIT_ELEMENT(#637538265,-1.);
+#637538281= /* SI_UNIT+THERMODYNAMIC_TEMPERATURE_UNIT */(NAMED_UNIT(*)
+SI_UNIT($,.DEGREE_CELSIUS.)THERMODYNAMIC_TEMPERATURE_UNIT());
+#637538282= FEA_MODEL_3D('Identification',(#637538284),#637538291,
+'NASTRAN BDF Converter v0.0.0',('NASTRAN'),'AnalysisModelType');
+#637538284= FEA_AXIS2_PLACEMENT_3D('0',#637538285,#637538287,#637538289,
+.CARTESIAN.,'FEA_BASIC_COORD_SYSTEM.0');
+#637538285= CARTESIAN_POINT('',(0.,0.,0.));
+#637538287= DIRECTION('AxisZ',(0.,0.,1.));
+#637538289= DIRECTION('RefX',(1.,0.,0.));
+#637538291= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538260,#637538268,#637538271,#637538265,#637538263,#637538274,
+#637538275,#637538278,#637538281,#637538267))REPRESENTATION_CONTEXT(
+'FEA_BASIC_COORD_SYSTEM.0','3d'));
+#637538295= NODE('2',(#637538297),#637538257,#637538282);
+#637538297= CARTESIAN_POINT('2',(1.,-2.,1.));
+#637538299= NODE('3',(#637538301),#637538257,#637538282);
+#637538301= CARTESIAN_POINT('3',(2.,-2.,1.));
+#637538303= NODE('4',(#637538305),#637538257,#637538282);
+#637538305= CARTESIAN_POINT('4',(3.,-2.,1.));
+#637538307= NODE('5',(#637538309),#637538257,#637538282);
+#637538309= CARTESIAN_POINT('5',(4.,-2.,1.));
+#637538311= NODE('6',(#637538313),#637538257,#637538282);
+#637538313= CARTESIAN_POINT('6',(5.,-2.,1.));
+#637538315= NODE('7',(#637538317),#637538257,#637538282);
+#637538317= CARTESIAN_POINT('7',(6.,-2.,1.));
+#637538319= NODE('8',(#637538321),#637538257,#637538282);
+#637538321= CARTESIAN_POINT('8',(7.,-2.,1.));
+#637538323= NODE('9',(#637538325),#637538257,#637538282);
+#637538325= CARTESIAN_POINT('9',(8.,-2.,1.));
+#637538327= NODE('10',(#637538329),#637538257,#637538282);
+#637538329= CARTESIAN_POINT('10',(9.,-2.,1.));
+#637538331= NODE('11',(#637538333),#637538257,#637538282);
+#637538333= CARTESIAN_POINT('11',(10.,-2.,1.));
+#637538335= NODE('12',(#637538337),#637538257,#637538282);
+#637538337= CARTESIAN_POINT('12',(11.,-2.,1.));
+#637538339= NODE('13',(#637538341),#637538257,#637538282);
+#637538341= CARTESIAN_POINT('13',(12.,-2.,1.));
+#637538343= NODE('14',(#637538345),#637538257,#637538282);
+#637538345= CARTESIAN_POINT('14',(13.,-2.,1.));
+#637538347= NODE('15',(#637538349),#637538257,#637538282);
+#637538349= CARTESIAN_POINT('15',(14.,-2.,1.));
+#637538351= NODE('16',(#637538353),#637538257,#637538282);
+#637538353= CARTESIAN_POINT('16',(15.,-2.,1.));
+#637538355= NODE('17',(#637538357),#637538257,#637538282);
+#637538357= CARTESIAN_POINT('17',(16.,-2.,1.));
+#637538359= FEA_AXIS2_PLACEMENT_3D('1',#637538360,#637538362,#637538364,
+.CARTESIAN.,'CORD2R.1');
+#637538360= CARTESIAN_POINT('',(0.,0.,0.));
+#637538362= DIRECTION('AxisZ',(0.,0.,1.));
+#637538364= DIRECTION('RefX',(1.,0.,0.));
+#637538366= FEA_MODEL_DEFINITION('fea_model_definition_id_1',$,
+#637538247,.U.);
+#637538367= STRUCTURAL_RESPONSE_PROPERTY(
+'structural_response_property_id_1',$,#637538366);
+#637538368= STRUCTURAL_RESPONSE_PROPERTY_DEFINITION_REPRESENTATION(
+#637538367,#637538282);
+#637538369= NAME_ATTRIBUTE('',#637538239);
+#637538370= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538371,#637538372,(
+#637538239));
+#637538371= GROUP('default-gpvv-type',$);
+#637538372= CLASSIFICATION_ROLE('view_type',$);
+#637538374= APPLIED_IDENTIFICATION_ASSIGNMENT('default-id.0',#637538375,
+(#637538240,#637538239,#637538241));
+#637538375= IDENTIFICATION_ROLE('default-role',$);
+#637538377= APPLIED_ORGANIZATION_ASSIGNMENT(#637538378,#637538379,(
+#637538374));
+#637538378= ORGANIZATION($,'default-organization',$);
+#637538379= ORGANIZATION_ROLE('id context');
+#637538381= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538382,#637538383,(
+#637538374));
+#637538382= GROUP('id',$);
+#637538383= CLASSIFICATION_ROLE('',$);
+#637538385= APPLICATION_PROTOCOL_DEFINITION('status',
+'ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies'
+,2011,#637538235);
+#637538386= DESCRIPTION_ATTRIBUTE('SimDM',#637538235);
+#637538387= ID_ATTRIBUTE('SimDM',#637538235);
+#637538388= DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.);
+#637538389= PRODUCT_RELATED_PRODUCT_CATEGORY('document',$,());
+#637538391= PRODUCT_RELATED_PRODUCT_CATEGORY('product',$,(#637538241));
+#637538393= DESCRIPTION_ATTRIBUTE('',#637538245);
+#637538394= CARTESIAN_POINT('0',(0.,0.,0.));
+#637538396= DUMMY_NODE('0',(#637538394),#637538291,#637538282);
+#637538398= ITEM_DEFINED_TRANSFORMATION('','',#637538284,#637538359);
+#637538399= REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION('','',
+#637538282,#637538249,#637538398);
+#637538400= ELEMENT_MATERIAL('MAT1.1','Fea Material',(#637538402,
+#637538417,#637538422));
+#637538402= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538403,#637538405,
+#637538409);
+#637538403= MATERIAL_PROPERTY('MAT1.1.0',$,#637538404);
+#637538404= CHARACTERIZED_OBJECT('material_property',$);
+#637538405= REPRESENTATION('representation_id_2',(#637538407),#637538291
+);
+#637538407= FEA_LINEAR_ELASTICITY('',FEA_ISOTROPIC_SYMMETRIC_TENSOR4_3D(
+(10000000.,0.33)));
+#637538409= DATA_ENVIRONMENT('DATA_ENV','Property_conditions',(
+#637538411));
+#637538411= PROPERTY_DEFINITION_REPRESENTATION(#637538412,#637538414);
+#637538412= PROPERTY_DEFINITION('Material Property Definition',$,
+#637538413);
+#637538413= CHARACTERIZED_OBJECT('property',$);
+#637538414= REPRESENTATION('representation_id_1',(#637538416),#637538291
+);
+#637538416= MEASURE_REPRESENTATION_ITEM('representation_item_name_1',
+CONTEXT_DEPENDENT_MEASURE(70.),#637538281);
+#637538417= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538418,#637538419,
+#637538409);
+#637538418= MATERIAL_PROPERTY('MAT1.1.1',$,#637538404);
+#637538419= REPRESENTATION('representation_id_3',(#637538421),#637538291
+);
+#637538421= FEA_MASS_DENSITY('',0.000254);
+#637538422= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538423,#637538424,
+#637538409);
+#637538423= MATERIAL_PROPERTY('MAT1.1.2',$,#637538404);
+#637538424= REPRESENTATION('representation_id_4',(#637538426),#637538291
+);
+#637538426= FEA_TANGENTIAL_COEFFICIENT_OF_LINEAR_THERMAL_EXPANSION('',
+ISOTROPIC_SYMMETRIC_TENSOR2_3D(0.));
+#637538427= CURVE_3D_ELEMENT_REPRESENTATION('16',(#637538429,#637538433)
+,#637538435,(#637538351,#637538355),#637538282,#637538439,#637538443,
+#637538400);
+#637538429= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538430
+);
+#637538430= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538431);
+#637538431= DIRECTION('undefined',(1.,0.,0.));
+#637538433= FEA_PARAMETRIC_POINT('',(1.,0.,0.));
+#637538435= PARAMETRIC_REPRESENTATION_CONTEXT(
+'parametric_representation_context','parametric');
+#637538439= CURVE_3D_ELEMENT_DESCRIPTOR(.LINEAR.,'LINEAR_CURVE.CROD',((
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.AXIAL.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.TORSION.))));
+#637538443= CURVE_3D_ELEMENT_PROPERTY('PROD.1','',(#637538445),(
+#637538456,#637538458),(#637538461,#637538464));
+#637538445= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538446,#637538447,
+#637538449);
+#637538446= CURVE_ELEMENT_LOCATION(#637538433);
+#637538447= EULER_ANGLES((0.,0.,0.));
+#637538449= CURVE_ELEMENT_SECTION_DERIVED_DEFINITIONS('',0.,8.,(
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)),(0.,0.,0.),
+0.,CONTEXT_DEPENDENT_MEASURE(0.),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.));
+#637538456= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538458= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538461= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538463));
+#637538463= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.NONE.),0.);
+#637538464= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538463));
+#637538466= CURVE_3D_ELEMENT_REPRESENTATION('15',(#637538429,#637538433)
+,#637538435,(#637538347,#637538351),#637538282,#637538439,#637538443,
+#637538400);
+#637538469= CURVE_3D_ELEMENT_REPRESENTATION('14',(#637538429,#637538433)
+,#637538435,(#637538343,#637538347),#637538282,#637538439,#637538443,
+#637538400);
+#637538472= CURVE_3D_ELEMENT_REPRESENTATION('13',(#637538429,#637538433)
+,#637538435,(#637538339,#637538343),#637538282,#637538439,#637538443,
+#637538400);
+#637538475= CURVE_3D_ELEMENT_REPRESENTATION('12',(#637538429,#637538433)
+,#637538435,(#637538335,#637538339),#637538282,#637538439,#637538443,
+#637538400);
+#637538478= CURVE_3D_ELEMENT_REPRESENTATION('11',(#637538429,#637538433)
+,#637538435,(#637538331,#637538335),#637538282,#637538439,#637538443,
+#637538400);
+#637538481= CURVE_3D_ELEMENT_REPRESENTATION('10',(#637538429,#637538433)
+,#637538435,(#637538327,#637538331),#637538282,#637538439,#637538443,
+#637538400);
+#637538484= CURVE_3D_ELEMENT_REPRESENTATION('9',(#637538429,#637538433),
+#637538435,(#637538323,#637538327),#637538282,#637538439,#637538443,
+#637538400);
+#637538487= CURVE_3D_ELEMENT_REPRESENTATION('8',(#637538429,#637538433),
+#637538435,(#637538319,#637538323),#637538282,#637538439,#637538443,
+#637538400);
+#637538490= CURVE_3D_ELEMENT_REPRESENTATION('7',(#637538429,#637538433),
+#637538435,(#637538315,#637538319),#637538282,#637538439,#637538443,
+#637538400);
+#637538493= CURVE_3D_ELEMENT_REPRESENTATION('6',(#637538429,#637538433),
+#637538435,(#637538311,#637538315),#637538282,#637538439,#637538443,
+#637538400);
+#637538496= CURVE_3D_ELEMENT_REPRESENTATION('5',(#637538429,#637538433),
+#637538435,(#637538307,#637538311),#637538282,#637538439,#637538443,
+#637538400);
+#637538499= CURVE_3D_ELEMENT_REPRESENTATION('4',(#637538429,#637538433),
+#637538435,(#637538303,#637538307),#637538282,#637538439,#637538443,
+#637538400);
+#637538502= CURVE_3D_ELEMENT_REPRESENTATION('3',(#637538429,#637538433),
+#637538435,(#637538299,#637538303),#637538282,#637538439,#637538443,
+#637538400);
+#637538505= CURVE_3D_ELEMENT_REPRESENTATION('2',(#637538429,#637538433),
+#637538435,(#637538295,#637538299),#637538282,#637538439,#637538443,
+#637538400);
+#637538508= CURVE_3D_ELEMENT_REPRESENTATION('1',(#637538429,#637538433),
+#637538435,(#637538253,#637538295),#637538282,#637538439,#637538443,
+#637538400);
+#637538511= ID_ATTRIBUTE('MAT1.1',#637538412);
+#637538512= DESCRIPTION_ATTRIBUTE('Elasticity',#637538402);
+#637538513= DESCRIPTION_ATTRIBUTE('MassDensity',#637538417);
+#637538514= DESCRIPTION_ATTRIBUTE('TangentCTE',#637538422);
+#637538515= CONTROL(#637538282,'Control.0','FemConvert',
+'MSC.NASTRAN JOB CREATED ON 06-JUL-00 AT 06:14:07',('<SOL>101</SOL>',
+'TIME 600','CEND','<GLOBALCASE>0</GLOBALCASE>','<SUBCASE>1</SUBCASE>',
+'<SUBCASE>2</SUBCASE>','ENDDATA'),('NASTRAN'));
+#637538518= RESULT_LINEAR_STATIC_ANALYSIS_SUB_STEP(#637538515,#637538519
+,#637538520);
+#637538519= RESULT('Result.0','FemConvert',
+'MSC.NASTRAN JOB CREATED ON 06-JUL-00 AT 06:14:07');
+#637538520= CALCULATED_STATE('Calculated State for Step 2','');
+#637538521= CONTROL_RESULT_RELATIONSHIP(#637538522,#637538518);
+#637538522= CONTROL_LINEAR_STATIC_ANALYSIS_STEP(#637538515,
+'STATIC STEP 2',2,#637538523,'',#637538524);
+#637538523= SPECIFIED_STATE('STEP DEFAULT','default_initial_state');
+#637538524= CONTROL_LINEAR_STATIC_LOAD_INCREMENT_PROCESS('STATIC STEP 2'
+,'',#637538525);
+#637538525= SPECIFIED_STATE('Step 2 Base Specified State',
+'Relating Specified State');
+#637538526= RESULT_LINEAR_STATIC_ANALYSIS_SUB_STEP(#637538515,#637538519
+,#637538527);
+#637538527= CALCULATED_STATE('Calculated State for Step 1','');
+#637538528= CONTROL_RESULT_RELATIONSHIP(#637538529,#637538526);
+#637538529= CONTROL_LINEAR_STATIC_ANALYSIS_STEP(#637538515,
+'STATIC STEP 1',1,#637538523,'',#637538530);
+#637538530= CONTROL_LINEAR_STATIC_LOAD_INCREMENT_PROCESS('STATIC STEP 1'
+,'',#637538531);
+#637538531= SPECIFIED_STATE('Step 1 Base Specified State',
+'Relating Specified State');
+#637538532= SPECIFIED_STATE('SPCCASE_2_2_1','Aggregator SPC 2 Step 1');
+#637538533= STATE_RELATIONSHIP(
+'SPCCASE_2_2_1 is related to Step 1 Base Specified State','',#637538531,
+#637538532);
+#637538534= STATE_RELATIONSHIP(
+'SPCVALSTATE_1_2 is related to SPCCASE_2_2_1','',#637538532,#637538535);
+#637538535= SPECIFIED_STATE('SPCVALSTATE_1_2','');
+#637538536= SINGLE_POINT_CONSTRAINT_ELEMENT_VALUES(#637538535,#637538537
+,#637538543,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)
+,CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538537= SINGLE_POINT_CONSTRAINT_ELEMENT('SPC1_1.0',(#637538529,
+#637538522),#637538253,#637538284,(#637538540,#637538541,#637538542),''
+);
+#637538540= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.X_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538541= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538542= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Z_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538543= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.)));
+#637538546= LINEARLY_SUPERIMPOSED_STATE('LOADSTATECOMBINATION_2',
+'Overall Factor Combined State');
+#637538548= STATE_RELATIONSHIP(
+'LOADSTATECOMBINATION_2 is related to Step 2 Base Specified State','',
+#637538525,#637538546);
+#637538549= STATE_RELATIONSHIP(
+'LOADSTATECOMBINATION_2 is related to Step 1 Base Specified State','',
+#637538531,#637538546);
+#637538550= STATE_COMPONENT('OverallComp','',#637538546,1.);
+#637538552= STATE_RELATIONSHIP(
+'LOADSTATEITEM_1 is related to OverallComp','',#637538550,#637538553);
+#637538553= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_1',
+'Item Factor State');
+#637538554= SPECIFIED_STATE('LOADSTATECORE_1',
+'Core Loads Specified State');
+#637538555= STATE_RELATIONSHIP(
+'LOADSTATECORE_1 is related to ItemComp_2_1','',#637538556,#637538554);
+#637538556= STATE_COMPONENT('ItemComp_2_1','',#637538553,1.);
+#637538558= NODAL_FREEDOM_ACTION_DEFINITION(#637538554,#637538355,
+#637538284,#637538559,(CONTEXT_DEPENDENT_MEASURE(-1000.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538559= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.)));
+#637538562= OUTPUT_REQUEST_STATE('Step 1 Output Request State','',(
+#637538529));
+#637538564= NODAL_FREEDOM_VALUES(#637538562,#637538565,#637538284,
+#637538567,(UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.)));
+#637538565= NODE_GROUP('','ALL',#637538282,(#637538253,#637538295,
+#637538299,#637538303,#637538307,#637538311,#637538315,#637538319,
+#637538323,#637538327,#637538331,#637538335,#637538339,#637538343,
+#637538347,#637538351,#637538355));
+#637538567= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.X_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(.Z_ROTATION.)));
+#637538570= ID_ATTRIBUTE('ALL',#637538565);
+#637538571= SPECIFIED_STATE('SPCCASE_2_2_2','Aggregator SPC 2 Step 2');
+#637538572= STATE_RELATIONSHIP(
+'SPCCASE_2_2_2 is related to Step 2 Base Specified State','',#637538525,
+#637538571);
+#637538573= OUTPUT_REQUEST_STATE('Step 2 Output Request State','',(
+#637538522));
+#637538575= NODAL_FREEDOM_VALUES(#637538573,#637538565,#637538284,
+#637538567,(UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.)));
+#637538577= NODAL_FREEDOM_VALUES(#637538527,#637538253,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538579= NODAL_FREEDOM_VALUES(#637538527,#637538295,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-1.25000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538581= NODAL_FREEDOM_VALUES(#637538527,#637538299,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-2.50000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538583= NODAL_FREEDOM_VALUES(#637538527,#637538303,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-3.75000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538585= NODAL_FREEDOM_VALUES(#637538527,#637538307,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-5.00000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538587= NODAL_FREEDOM_VALUES(#637538527,#637538311,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-6.25000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538589= NODAL_FREEDOM_VALUES(#637538527,#637538315,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-7.50000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538591= NODAL_FREEDOM_VALUES(#637538527,#637538319,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-8.75000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538593= NODAL_FREEDOM_VALUES(#637538527,#637538323,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0001),CONTEXT_DEPENDENT_MEASURE
+(0.),CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538595= NODAL_FREEDOM_VALUES(#637538527,#637538327,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0001125),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538597= NODAL_FREEDOM_VALUES(#637538527,#637538331,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.000125),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538599= NODAL_FREEDOM_VALUES(#637538527,#637538335,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0001375),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538601= NODAL_FREEDOM_VALUES(#637538527,#637538339,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.00015),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538603= NODAL_FREEDOM_VALUES(#637538527,#637538343,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0001625),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538605= NODAL_FREEDOM_VALUES(#637538527,#637538347,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.000175),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538607= NODAL_FREEDOM_VALUES(#637538527,#637538351,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0001875),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538609= NODAL_FREEDOM_VALUES(#637538527,#637538355,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0002),CONTEXT_DEPENDENT_MEASURE
+(0.),CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538611= NODAL_FREEDOM_VALUES(#637538520,#637538253,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538613= NODAL_FREEDOM_VALUES(#637538520,#637538295,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-1.25000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538615= NODAL_FREEDOM_VALUES(#637538520,#637538299,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-2.50000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538617= NODAL_FREEDOM_VALUES(#637538520,#637538303,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-3.75000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538619= NODAL_FREEDOM_VALUES(#637538520,#637538307,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-5.00000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538621= NODAL_FREEDOM_VALUES(#637538520,#637538311,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-6.25000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538623= NODAL_FREEDOM_VALUES(#637538520,#637538315,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-7.50000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538625= NODAL_FREEDOM_VALUES(#637538520,#637538319,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-8.75000000000000E-5),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538627= NODAL_FREEDOM_VALUES(#637538520,#637538323,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0001),CONTEXT_DEPENDENT_MEASURE
+(0.),CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538629= NODAL_FREEDOM_VALUES(#637538520,#637538327,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0001125),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538631= NODAL_FREEDOM_VALUES(#637538520,#637538331,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.000125),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538633= NODAL_FREEDOM_VALUES(#637538520,#637538335,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0001375),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538635= NODAL_FREEDOM_VALUES(#637538520,#637538339,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.00015),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538637= NODAL_FREEDOM_VALUES(#637538520,#637538343,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0001625),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538639= NODAL_FREEDOM_VALUES(#637538520,#637538347,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.000175),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538641= NODAL_FREEDOM_VALUES(#637538520,#637538351,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0001875),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538643= NODAL_FREEDOM_VALUES(#637538520,#637538355,#637538284,
+#637538567,(CONTEXT_DEPENDENT_MEASURE(-0.0002),CONTEXT_DEPENDENT_MEASURE
+(0.),CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+ENDSEC;
+
+END-ISO-10303-21;

data/cd209/ATS2-out.stp

@@ -0,0 +1,685 @@
+ISO-10303-21;
+HEADER;
+
+/******************************************************************************************
+* STEP Physical File produced by: The EXPRESS Data Manager Version 5.01.0100.b03 SimDM : 25 Apr 2012
+* Module:                         EDMstepFileFactory/EDMstandAlone
+* Creation date:                  Mon Jul 09 12:24:23 2012
+* Host:                           AER4WA926171Z
+* Database:                       C:\Documents and Settings\johnsjc2\Desktop\AP209\SimDM2010\DevCM\db\d
+* Database version:               5207
+* Database creation date:         Wed Apr 18 15:33:55 2012
+* Schema:                         AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF
+* Model:                          DataRepository.FemTest
+* Model creation date:            Mon Jul 09 12:24:23 2012
+* Header model:                   
+* EDMuser:                        superuser
+* EDMgroup:                       
+* License ID and type:            5565 : Project license. Expiry date: 31 Dec 2012
+* EDMstepFileFactory options:     010000000
+******************************************************************************************/
+
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME(
+'C:\\Documents and Settings\\johnsjc2\\Desktop\\AP209\\SimDM2010\\DevCM\\db\\d.DataRepository.FemTest'
+
+,
+          '2012-07-09T12:24:23',
+          ('ANONYMOUS USER'),
+          ('ANONYMOUS ORGANISATION'),
+          'The EXPRESS Data Manager Version 5.01.0100.b03 SimDM : 25 Apr 2012',
+          '',
+          '');
+FILE_SCHEMA(('AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF'));
+ENDSEC;
+
+DATA;
+#637538235= APPLICATION_CONTEXT('SimDM');
+#637538237= PRODUCT_DEFINITION_CONTEXT('assembly definition',#637538235,
+'life cycle stage');
+#637538239= PRODUCT_DEFINITION('default-id.0',$,#637538240,#637538244);
+#637538240= PRODUCT_DEFINITION_FORMATION('default-id.0','',#637538241);
+#637538241= PRODUCT('default-id.0','default-fea-part','',(#637538243));
+#637538243= PRODUCT_CONTEXT('design_context',#637538235,'design_context'
+);
+#637538244= PRODUCT_DEFINITION_CONTEXT(
+'product_definition_context_name_1',#637538245,'ANALYSIS-STAGE');
+#637538245= APPLICATION_CONTEXT('FEA-ANALYSIS-DOMAIN');
+#637538247= PRODUCT_DEFINITION_SHAPE('name',$,#637538239);
+#637538248= SHAPE_DEFINITION_REPRESENTATION(#637538247,#637538249);
+#637538249= POINT_REPRESENTATION('point_representation_name_1',(
+#637538251,#637538359),#637538257);
+#637538251= NODE_SET('node_set_name_1',(#637538253,#637538295,#637538299
+,#637538303,#637538307,#637538311,#637538315,#637538319,#637538323,
+#637538327,#637538331,#637538335,#637538339,#637538343,#637538347,
+#637538351,#637538355));
+#637538253= NODE('1',(#637538255),#637538257,#637538282);
+#637538255= CARTESIAN_POINT('1',(0.,-2.,1.));
+#637538257= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538260,#637538268,#637538271,#637538265,#637538263,#637538274,
+#637538275,#637538278,#637538281,#637538267))REPRESENTATION_CONTEXT(
+'CORD2R.1','3d'));
+#637538260= SI_ENERGY_UNIT((#637538262,#637538264,#637538266),*,$,
+.JOULE.);
+#637538262= DERIVED_UNIT_ELEMENT(#637538263,1.);
+#637538263= /* MASS_UNIT+SI_UNIT */(MASS_UNIT()NAMED_UNIT(*)SI_UNIT(
+.KILO.,.GRAM.));
+#637538264= DERIVED_UNIT_ELEMENT(#637538265,2.);
+#637538265= /* LENGTH_UNIT+SI_UNIT */(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(
+$,.METRE.));
+#637538266= DERIVED_UNIT_ELEMENT(#637538267,-2.);
+#637538267= /* SI_UNIT+TIME_UNIT */(NAMED_UNIT(*)SI_UNIT($,.SECOND.)
+TIME_UNIT());
+#637538268= SI_FORCE_UNIT((#637538262,#637538270,#637538266),*,$,
+.NEWTON.);
+#637538270= DERIVED_UNIT_ELEMENT(#637538265,1.);
+#637538271= SI_FREQUENCY_UNIT((#637538273),*,$,.HERTZ.);
+#637538273= DERIVED_UNIT_ELEMENT(#637538267,-1.);
+#637538274= /* PLANE_ANGLE_UNIT+SI_UNIT */(NAMED_UNIT(*)PLANE_ANGLE_UNIT
+()SI_UNIT($,.RADIAN.));
+#637538275= SI_POWER_UNIT((#637538262,#637538264,#637538277),*,$,.WATT.
+);
+#637538277= DERIVED_UNIT_ELEMENT(#637538267,-3.);
+#637538278= SI_PRESSURE_UNIT((#637538262,#637538280,#637538266),*,$,
+.PASCAL.);
+#637538280= DERIVED_UNIT_ELEMENT(#637538265,-1.);
+#637538281= /* SI_UNIT+THERMODYNAMIC_TEMPERATURE_UNIT */(NAMED_UNIT(*)
+SI_UNIT($,.DEGREE_CELSIUS.)THERMODYNAMIC_TEMPERATURE_UNIT());
+#637538282= FEA_MODEL_3D('Identification',(#637538284),#637538291,
+'NASTRAN BDF Converter v0.0.0',('NASTRAN'),'AnalysisModelType');
+#637538284= FEA_AXIS2_PLACEMENT_3D('0',#637538285,#637538287,#637538289,
+.CARTESIAN.,'FEA_BASIC_COORD_SYSTEM.0');
+#637538285= CARTESIAN_POINT('',(0.,0.,0.));
+#637538287= DIRECTION('AxisZ',(0.,0.,1.));
+#637538289= DIRECTION('RefX',(1.,0.,0.));
+#637538291= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538260,#637538268,#637538271,#637538265,#637538263,#637538274,
+#637538275,#637538278,#637538281,#637538267))REPRESENTATION_CONTEXT(
+'FEA_BASIC_COORD_SYSTEM.0','3d'));
+#637538295= NODE('2',(#637538297),#637538257,#637538282);
+#637538297= CARTESIAN_POINT('2',(1.,-2.,1.));
+#637538299= NODE('3',(#637538301),#637538257,#637538282);
+#637538301= CARTESIAN_POINT('3',(2.,-2.,1.));
+#637538303= NODE('4',(#637538305),#637538257,#637538282);
+#637538305= CARTESIAN_POINT('4',(3.,-2.,1.));
+#637538307= NODE('5',(#637538309),#637538257,#637538282);
+#637538309= CARTESIAN_POINT('5',(4.,-2.,1.));
+#637538311= NODE('6',(#637538313),#637538257,#637538282);
+#637538313= CARTESIAN_POINT('6',(5.,-2.,1.));
+#637538315= NODE('7',(#637538317),#637538257,#637538282);
+#637538317= CARTESIAN_POINT('7',(6.,-2.,1.));
+#637538319= NODE('8',(#637538321),#637538257,#637538282);
+#637538321= CARTESIAN_POINT('8',(7.,-2.,1.));
+#637538323= NODE('9',(#637538325),#637538257,#637538282);
+#637538325= CARTESIAN_POINT('9',(8.,-2.,1.));
+#637538327= NODE('10',(#637538329),#637538257,#637538282);
+#637538329= CARTESIAN_POINT('10',(9.,-2.,1.));
+#637538331= NODE('11',(#637538333),#637538257,#637538282);
+#637538333= CARTESIAN_POINT('11',(10.,-2.,1.));
+#637538335= NODE('12',(#637538337),#637538257,#637538282);
+#637538337= CARTESIAN_POINT('12',(11.,-2.,1.));
+#637538339= NODE('13',(#637538341),#637538257,#637538282);
+#637538341= CARTESIAN_POINT('13',(12.,-2.,1.));
+#637538343= NODE('14',(#637538345),#637538257,#637538282);
+#637538345= CARTESIAN_POINT('14',(13.,-2.,1.));
+#637538347= NODE('15',(#637538349),#637538257,#637538282);
+#637538349= CARTESIAN_POINT('15',(14.,-2.,1.));
+#637538351= NODE('16',(#637538353),#637538257,#637538282);
+#637538353= CARTESIAN_POINT('16',(15.,-2.,1.));
+#637538355= NODE('17',(#637538357),#637538257,#637538282);
+#637538357= CARTESIAN_POINT('17',(16.,-2.,1.));
+#637538359= FEA_AXIS2_PLACEMENT_3D('1',#637538360,#637538362,#637538364,
+.CARTESIAN.,'CORD2R.1');
+#637538360= CARTESIAN_POINT('',(0.,0.,0.));
+#637538362= DIRECTION('AxisZ',(0.,0.,1.));
+#637538364= DIRECTION('RefX',(1.,0.,0.));
+#637538366= FEA_MODEL_DEFINITION('fea_model_definition_id_1',$,
+#637538247,.U.);
+#637538367= STRUCTURAL_RESPONSE_PROPERTY(
+'structural_response_property_id_1',$,#637538366);
+#637538368= STRUCTURAL_RESPONSE_PROPERTY_DEFINITION_REPRESENTATION(
+#637538367,#637538282);
+#637538369= NAME_ATTRIBUTE('',#637538239);
+#637538370= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538371,#637538372,(
+#637538239));
+#637538371= GROUP('default-gpvv-type',$);
+#637538372= CLASSIFICATION_ROLE('view_type',$);
+#637538374= APPLIED_IDENTIFICATION_ASSIGNMENT('default-id.0',#637538375,
+(#637538240,#637538239,#637538241));
+#637538375= IDENTIFICATION_ROLE('default-role',$);
+#637538377= APPLIED_ORGANIZATION_ASSIGNMENT(#637538378,#637538379,(
+#637538374));
+#637538378= ORGANIZATION($,'default-organization',$);
+#637538379= ORGANIZATION_ROLE('id context');
+#637538381= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538382,#637538383,(
+#637538374));
+#637538382= GROUP('id',$);
+#637538383= CLASSIFICATION_ROLE('',$);
+#637538385= APPLICATION_PROTOCOL_DEFINITION('status',
+'ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies'
+,2011,#637538235);
+#637538386= DESCRIPTION_ATTRIBUTE('SimDM',#637538235);
+#637538387= ID_ATTRIBUTE('SimDM',#637538235);
+#637538388= DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.);
+#637538389= PRODUCT_RELATED_PRODUCT_CATEGORY('document',$,());
+#637538391= PRODUCT_RELATED_PRODUCT_CATEGORY('product',$,(#637538241));
+#637538393= DESCRIPTION_ATTRIBUTE('',#637538245);
+#637538394= CARTESIAN_POINT('0',(0.,0.,0.));
+#637538396= DUMMY_NODE('0',(#637538394),#637538291,#637538282);
+#637538398= ITEM_DEFINED_TRANSFORMATION('','',#637538284,#637538359);
+#637538399= REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION('','',
+#637538282,#637538249,#637538398);
+#637538400= ELEMENT_MATERIAL('MAT1.1','Fea Material',(#637538402,
+#637538417,#637538422));
+#637538402= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538403,#637538405,
+#637538409);
+#637538403= MATERIAL_PROPERTY('MAT1.1.0',$,#637538404);
+#637538404= CHARACTERIZED_OBJECT('material_property',$);
+#637538405= REPRESENTATION('representation_id_2',(#637538407),#637538291
+);
+#637538407= FEA_LINEAR_ELASTICITY('',FEA_ISOTROPIC_SYMMETRIC_TENSOR4_3D(
+(10000000.,0.33)));
+#637538409= DATA_ENVIRONMENT('DATA_ENV','Property_conditions',(
+#637538411));
+#637538411= PROPERTY_DEFINITION_REPRESENTATION(#637538412,#637538414);
+#637538412= PROPERTY_DEFINITION('Material Property Definition',$,
+#637538413);
+#637538413= CHARACTERIZED_OBJECT('property',$);
+#637538414= REPRESENTATION('representation_id_1',(#637538416),#637538291
+);
+#637538416= MEASURE_REPRESENTATION_ITEM('representation_item_name_1',
+CONTEXT_DEPENDENT_MEASURE(70.),#637538281);
+#637538417= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538418,#637538419,
+#637538409);
+#637538418= MATERIAL_PROPERTY('MAT1.1.1',$,#637538404);
+#637538419= REPRESENTATION('representation_id_3',(#637538421),#637538291
+);
+#637538421= FEA_MASS_DENSITY('',0.000254);
+#637538422= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538423,#637538424,
+#637538409);
+#637538423= MATERIAL_PROPERTY('MAT1.1.2',$,#637538404);
+#637538424= REPRESENTATION('representation_id_4',(#637538426),#637538291
+);
+#637538426= FEA_TANGENTIAL_COEFFICIENT_OF_LINEAR_THERMAL_EXPANSION('',
+ISOTROPIC_SYMMETRIC_TENSOR2_3D(0.));
+#637538427= CURVE_3D_ELEMENT_REPRESENTATION('16',(#637538429,#637538433)
+,#637538435,(#637538351,#637538355),#637538282,#637538439,#637538445,
+#637538400);
+#637538429= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538430
+);
+#637538430= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538431);
+#637538431= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538433= FEA_PARAMETRIC_POINT('',(1.,0.,0.));
+#637538435= PARAMETRIC_REPRESENTATION_CONTEXT(
+'parametric_representation_context','parametric');
+#637538439= CURVE_3D_ELEMENT_DESCRIPTOR(.LINEAR.,'LINEAR_CURVE.CBAR*',((
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.AXIAL.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.Y_Y_BENDING.),
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.Z_Z_BENDING.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.TORSION.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.X_Y_SHEAR.),
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.X_Z_SHEAR.))));
+#637538445= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.16','',(#637538447),(
+#637538458,#637538460),(#637538463,#637538470));
+#637538447= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538448,#637538449,
+#637538451);
+#637538448= CURVE_ELEMENT_LOCATION(#637538433);
+#637538449= EULER_ANGLES((0.,0.,0.));
+#637538451= CURVE_ELEMENT_SECTION_DERIVED_DEFINITIONS('PBAR.1_0',0.,8.,(
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)),(2.667,
+10.667,0.),0.,CONTEXT_DEPENDENT_MEASURE(0.),(CONTEXT_DEPENDENT_MEASURE(
+0.),CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.));
+#637538458= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538460= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538463= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538465= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.X_TRANSLATION.),0.);
+#637538466= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.Y_TRANSLATION.),0.);
+#637538467= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.Z_TRANSLATION.),0.);
+#637538468= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.X_ROTATION.),0.);
+#637538469= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.Z_ROTATION.),0.);
+#637538470= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538472= CURVE_3D_ELEMENT_REPRESENTATION('15',(#637538474,#637538433)
+,#637538435,(#637538347,#637538351),#637538282,#637538439,#637538479,
+#637538400);
+#637538474= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538475
+);
+#637538475= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538476);
+#637538476= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538479= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.15','',(#637538481),(
+#637538486,#637538488),(#637538491,#637538493));
+#637538481= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538482,#637538483,
+#637538451);
+#637538482= CURVE_ELEMENT_LOCATION(#637538433);
+#637538483= EULER_ANGLES((0.,0.,0.));
+#637538486= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538488= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538491= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538493= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538495= CURVE_3D_ELEMENT_REPRESENTATION('14',(#637538497,#637538433)
+,#637538435,(#637538343,#637538347),#637538282,#637538439,#637538502,
+#637538400);
+#637538497= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538498
+);
+#637538498= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538499);
+#637538499= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538502= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.14','',(#637538504),(
+#637538509,#637538511),(#637538514,#637538516));
+#637538504= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538505,#637538506,
+#637538451);
+#637538505= CURVE_ELEMENT_LOCATION(#637538433);
+#637538506= EULER_ANGLES((0.,0.,0.));
+#637538509= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538511= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538514= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538516= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538518= CURVE_3D_ELEMENT_REPRESENTATION('13',(#637538520,#637538433)
+,#637538435,(#637538339,#637538343),#637538282,#637538439,#637538525,
+#637538400);
+#637538520= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538521
+);
+#637538521= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538522);
+#637538522= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538525= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.13','',(#637538527),(
+#637538532,#637538534),(#637538537,#637538539));
+#637538527= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538528,#637538529,
+#637538451);
+#637538528= CURVE_ELEMENT_LOCATION(#637538433);
+#637538529= EULER_ANGLES((0.,0.,0.));
+#637538532= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538534= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538537= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538539= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538541= CURVE_3D_ELEMENT_REPRESENTATION('12',(#637538543,#637538433)
+,#637538435,(#637538335,#637538339),#637538282,#637538439,#637538548,
+#637538400);
+#637538543= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538544
+);
+#637538544= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538545);
+#637538545= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538548= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.12','',(#637538550),(
+#637538555,#637538557),(#637538560,#637538562));
+#637538550= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538551,#637538552,
+#637538451);
+#637538551= CURVE_ELEMENT_LOCATION(#637538433);
+#637538552= EULER_ANGLES((0.,0.,0.));
+#637538555= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538557= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538560= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538562= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538564= CURVE_3D_ELEMENT_REPRESENTATION('11',(#637538566,#637538433)
+,#637538435,(#637538331,#637538335),#637538282,#637538439,#637538571,
+#637538400);
+#637538566= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538567
+);
+#637538567= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538568);
+#637538568= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538571= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.11','',(#637538573),(
+#637538578,#637538580),(#637538583,#637538585));
+#637538573= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538574,#637538575,
+#637538451);
+#637538574= CURVE_ELEMENT_LOCATION(#637538433);
+#637538575= EULER_ANGLES((0.,0.,0.));
+#637538578= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538580= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538583= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538585= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538587= CURVE_3D_ELEMENT_REPRESENTATION('10',(#637538589,#637538433)
+,#637538435,(#637538327,#637538331),#637538282,#637538439,#637538594,
+#637538400);
+#637538589= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538590
+);
+#637538590= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538591);
+#637538591= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538594= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.10','',(#637538596),(
+#637538601,#637538603),(#637538606,#637538608));
+#637538596= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538597,#637538598,
+#637538451);
+#637538597= CURVE_ELEMENT_LOCATION(#637538433);
+#637538598= EULER_ANGLES((0.,0.,0.));
+#637538601= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538603= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538606= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538608= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538610= CURVE_3D_ELEMENT_REPRESENTATION('9',(#637538612,#637538433),
+#637538435,(#637538323,#637538327),#637538282,#637538439,#637538617,
+#637538400);
+#637538612= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538613
+);
+#637538613= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538614);
+#637538614= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538617= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.9','',(#637538619),(
+#637538624,#637538626),(#637538629,#637538631));
+#637538619= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538620,#637538621,
+#637538451);
+#637538620= CURVE_ELEMENT_LOCATION(#637538433);
+#637538621= EULER_ANGLES((0.,0.,0.));
+#637538624= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538626= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538629= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538631= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538633= CURVE_3D_ELEMENT_REPRESENTATION('8',(#637538635,#637538433),
+#637538435,(#637538319,#637538323),#637538282,#637538439,#637538640,
+#637538400);
+#637538635= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538636
+);
+#637538636= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538637);
+#637538637= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538640= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.8','',(#637538642),(
+#637538647,#637538649),(#637538652,#637538654));
+#637538642= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538643,#637538644,
+#637538451);
+#637538643= CURVE_ELEMENT_LOCATION(#637538433);
+#637538644= EULER_ANGLES((0.,0.,0.));
+#637538647= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538649= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538652= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538654= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538656= CURVE_3D_ELEMENT_REPRESENTATION('7',(#637538658,#637538433),
+#637538435,(#637538315,#637538319),#637538282,#637538439,#637538663,
+#637538400);
+#637538658= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538659
+);
+#637538659= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538660);
+#637538660= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538663= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.7','',(#637538665),(
+#637538670,#637538672),(#637538675,#637538677));
+#637538665= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538666,#637538667,
+#637538451);
+#637538666= CURVE_ELEMENT_LOCATION(#637538433);
+#637538667= EULER_ANGLES((0.,0.,0.));
+#637538670= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538672= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538675= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538677= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538679= CURVE_3D_ELEMENT_REPRESENTATION('6',(#637538681,#637538433),
+#637538435,(#637538311,#637538315),#637538282,#637538439,#637538686,
+#637538400);
+#637538681= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538682
+);
+#637538682= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538683);
+#637538683= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538686= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.6','',(#637538688),(
+#637538693,#637538695),(#637538698,#637538700));
+#637538688= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538689,#637538690,
+#637538451);
+#637538689= CURVE_ELEMENT_LOCATION(#637538433);
+#637538690= EULER_ANGLES((0.,0.,0.));
+#637538693= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538695= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538698= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538700= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538702= CURVE_3D_ELEMENT_REPRESENTATION('5',(#637538704,#637538433),
+#637538435,(#637538307,#637538311),#637538282,#637538439,#637538709,
+#637538400);
+#637538704= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538705
+);
+#637538705= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538706);
+#637538706= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538709= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.5','',(#637538711),(
+#637538716,#637538718),(#637538721,#637538723));
+#637538711= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538712,#637538713,
+#637538451);
+#637538712= CURVE_ELEMENT_LOCATION(#637538433);
+#637538713= EULER_ANGLES((0.,0.,0.));
+#637538716= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538718= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538721= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538723= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538725= CURVE_3D_ELEMENT_REPRESENTATION('4',(#637538727,#637538433),
+#637538435,(#637538303,#637538307),#637538282,#637538439,#637538732,
+#637538400);
+#637538727= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538728
+);
+#637538728= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538729);
+#637538729= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538732= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.4','',(#637538734),(
+#637538739,#637538741),(#637538744,#637538746));
+#637538734= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538735,#637538736,
+#637538451);
+#637538735= CURVE_ELEMENT_LOCATION(#637538433);
+#637538736= EULER_ANGLES((0.,0.,0.));
+#637538739= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538741= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538744= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538746= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538748= CURVE_3D_ELEMENT_REPRESENTATION('3',(#637538750,#637538433),
+#637538435,(#637538299,#637538303),#637538282,#637538439,#637538755,
+#637538400);
+#637538750= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538751
+);
+#637538751= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538752);
+#637538752= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538755= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.3','',(#637538757),(
+#637538762,#637538764),(#637538767,#637538769));
+#637538757= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538758,#637538759,
+#637538451);
+#637538758= CURVE_ELEMENT_LOCATION(#637538433);
+#637538759= EULER_ANGLES((0.,0.,0.));
+#637538762= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538764= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538767= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538769= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538771= CURVE_3D_ELEMENT_REPRESENTATION('2',(#637538773,#637538433),
+#637538435,(#637538295,#637538299),#637538282,#637538439,#637538778,
+#637538400);
+#637538773= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538774
+);
+#637538774= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538775);
+#637538775= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538778= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.2','',(#637538780),(
+#637538785,#637538787),(#637538790,#637538792));
+#637538780= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538781,#637538782,
+#637538451);
+#637538781= CURVE_ELEMENT_LOCATION(#637538433);
+#637538782= EULER_ANGLES((0.,0.,0.));
+#637538785= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538787= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538790= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538792= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538794= CURVE_3D_ELEMENT_REPRESENTATION('1',(#637538796,#637538433),
+#637538435,(#637538253,#637538295),#637538282,#637538439,#637538801,
+#637538400);
+#637538796= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538797
+);
+#637538797= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538798);
+#637538798= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538801= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.1','',(#637538803),(
+#637538808,#637538810),(#637538813,#637538815));
+#637538803= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538804,#637538805,
+#637538451);
+#637538804= CURVE_ELEMENT_LOCATION(#637538433);
+#637538805= EULER_ANGLES((0.,0.,0.));
+#637538808= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538810= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538813= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538815= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538817= ID_ATTRIBUTE('MAT1.1',#637538412);
+#637538818= DESCRIPTION_ATTRIBUTE('Elasticity',#637538402);
+#637538819= DESCRIPTION_ATTRIBUTE('MassDensity',#637538417);
+#637538820= DESCRIPTION_ATTRIBUTE('TangentCTE',#637538422);
+#637538821= CONTROL(#637538282,'Control.0','FemConvert',
+'MSC.NASTRAN JOB CREATED ON 10-JUL-00 AT 06:54:00',('<SOL>101</SOL>',
+'TIME 600','CEND','<GLOBALCASE>0</GLOBALCASE>','<SUBCASE>1</SUBCASE>',
+'ENDDATA 07CFC18D'),('NASTRAN'));
+#637538824= CONTROL_LINEAR_STATIC_ANALYSIS_STEP(#637538821,
+'STATIC STEP 1',1,#637538825,'',#637538826);
+#637538825= SPECIFIED_STATE('STEP DEFAULT','default_initial_state');
+#637538826= CONTROL_LINEAR_STATIC_LOAD_INCREMENT_PROCESS('STATIC STEP 1'
+,'',#637538827);
+#637538827= SPECIFIED_STATE('Step 1 Base Specified State',
+'Relating Specified State');
+#637538828= OUTPUT_REQUEST_STATE('Step 1 Output Request State','',(
+#637538824));
+#637538830= NODAL_FREEDOM_VALUES(#637538828,#637538831,#637538284,
+#637538833,(UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.)));
+#637538831= NODE_GROUP('','ALL',#637538282,(#637538253,#637538295,
+#637538299,#637538303,#637538307,#637538311,#637538315,#637538319,
+#637538323,#637538327,#637538331,#637538335,#637538339,#637538343,
+#637538347,#637538351,#637538355));
+#637538833= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.X_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(.Z_ROTATION.)));
+#637538836= SINGLE_POINT_CONSTRAINT_ELEMENT('SPC1_1.0',(#637538824),
+#637538253,#637538284,(#637538839,#637538840,#637538841,#637538842,
+#637538843,#637538844),'');
+#637538839= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.X_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538840= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538841= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Z_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538842= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.X_ROTATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538843= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538844= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Z_ROTATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538845= SINGLE_POINT_CONSTRAINT_ELEMENT_VALUES(#637538846,#637538836
+,#637538847,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)
+,CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538846= SPECIFIED_STATE('SPCVALSTATE_1_2','');
+#637538847= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.X_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(.Z_ROTATION.)));
+#637538850= SPECIFIED_STATE('SPCCASE_2_2_1','Aggregator SPC 2 Step 1');
+#637538851= STATE_RELATIONSHIP(
+'SPCCASE_2_2_1 is related to Step 1 Base Specified State','',#637538827,
+#637538850);
+#637538852= STATE_RELATIONSHIP(
+'SPCVALSTATE_1_2 is related to SPCCASE_2_2_1','',#637538850,#637538846);
+#637538853= LINEARLY_SUPERIMPOSED_STATE('LOADSTATECOMBINATION_2',
+'Overall Factor Combined State');
+#637538855= STATE_RELATIONSHIP(
+'LOADSTATECOMBINATION_2 is related to Step 1 Base Specified State','',
+#637538827,#637538853);
+#637538856= STATE_COMPONENT('OverallComp','',#637538853,1.);
+#637538858= STATE_RELATIONSHIP(
+'LOADSTATEITEM_4 is related to OverallComp','',#637538856,#637538859);
+#637538859= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_4',
+'Item Factor State');
+#637538860= STATE_RELATIONSHIP(
+'LOADSTATEITEM_3 is related to OverallComp','',#637538856,#637538861);
+#637538861= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_3',
+'Item Factor State');
+#637538862= STATE_RELATIONSHIP(
+'LOADSTATEITEM_1 is related to OverallComp','',#637538856,#637538863);
+#637538863= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_1',
+'Item Factor State');
+#637538864= SPECIFIED_STATE('LOADSTATECORE_1',
+'Core Loads Specified State');
+#637538865= STATE_RELATIONSHIP(
+'LOADSTATECORE_1 is related to ItemComp_2_1','',#637538866,#637538864);
+#637538866= STATE_COMPONENT('ItemComp_2_1','',#637538863,1.);
+#637538868= NODAL_FREEDOM_ACTION_DEFINITION(#637538864,#637538355,
+#637538284,#637538869,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-1010.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538869= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.)));
+#637538872= SPECIFIED_STATE('LOADSTATECORE_3',
+'Core Loads Specified State');
+#637538873= STATE_RELATIONSHIP(
+'LOADSTATECORE_3 is related to ItemComp_2_3','',#637538874,#637538872);
+#637538874= STATE_COMPONENT('ItemComp_2_3','',#637538861,1.);
+#637538876= NODAL_FREEDOM_ACTION_DEFINITION(#637538872,#637538331,
+#637538284,#637538869,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-10.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538878= SPECIFIED_STATE('LOADSTATECORE_4',
+'Core Loads Specified State');
+#637538879= STATE_RELATIONSHIP(
+'LOADSTATECORE_4 is related to ItemComp_2_4','',#637538880,#637538878);
+#637538880= STATE_COMPONENT('ItemComp_2_4','',#637538859,1.);
+#637538882= NODAL_FREEDOM_ACTION_DEFINITION(#637538878,#637538351,
+#637538284,#637538869,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538884= NODAL_FREEDOM_ACTION_DEFINITION(#637538878,#637538347,
+#637538284,#637538869,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538886= NODAL_FREEDOM_ACTION_DEFINITION(#637538878,#637538343,
+#637538284,#637538869,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538888= NODAL_FREEDOM_ACTION_DEFINITION(#637538878,#637538339,
+#637538284,#637538869,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538890= NODAL_FREEDOM_ACTION_DEFINITION(#637538878,#637538335,
+#637538284,#637538869,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538892= ID_ATTRIBUTE('ALL',#637538831);
+ENDSEC;
+
+END-ISO-10303-21;

data/cd209/ATS2Mod0-out.stp

@@ -0,0 +1,705 @@
+ISO-10303-21;
+HEADER;
+
+/******************************************************************************************
+* STEP Physical File produced by: The EXPRESS Data Manager Version 5.01.0100.b04 : 12 Apr 2012
+* Module:                         EDMstepFileFactory/EDMstandAlone
+* Creation date:                  Tue Jun 05 10:29:56 2012
+* Host:                           AER4WA926171Z
+* Database:                       C:\Documents and Settings\johnsjc2\Desktop\AP209\SimDM2010\DevCM\db\d
+* Database version:               5207
+* Database creation date:         Wed Apr 18 15:33:55 2012
+* Schema:                         AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF
+* Model:                          DataRepository.FemTest
+* Model creation date:            Tue Jun 05 10:29:56 2012
+* Header model:                   
+* EDMuser:                        superuser
+* EDMgroup:                       
+* License ID and type:            5565 : Project license. Expiry date: 31 Dec 2012
+* EDMstepFileFactory options:     010000000
+******************************************************************************************/
+
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME(
+'C:\\Documents and Settings\\johnsjc2\\Desktop\\AP209\\SimDM2010\\DevCM\\db\\d.DataRepository.FemTest'
+
+,
+          '2012-06-05T10:29:56',
+          ('ANONYMOUS USER'),
+          ('ANONYMOUS ORGANISATION'),
+          'The EXPRESS Data Manager Version 5.01.0100.b04 : 12 Apr 2012',
+          '',
+          '');
+FILE_SCHEMA(('AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF'));
+ENDSEC;
+
+DATA;
+#637538233= APPLICATION_CONTEXT('SimDM');
+#637538235= PRODUCT_DEFINITION_CONTEXT('assembly definition',#637538233,
+'life cycle stage');
+#637538237= PRODUCT_DEFINITION('default-id.0',$,#637538238,#637538242);
+#637538238= PRODUCT_DEFINITION_FORMATION('default-id.0','',#637538239);
+#637538239= PRODUCT('default-id.0','default-fea-part','',(#637538241));
+#637538241= PRODUCT_CONTEXT('design_context',#637538233,'design_context'
+);
+#637538242= PRODUCT_DEFINITION_CONTEXT(
+'product_definition_context_name_1',#637538243,'ANALYSIS-STAGE');
+#637538243= APPLICATION_CONTEXT('FEA-ANALYSIS-DOMAIN');
+#637538245= PRODUCT_DEFINITION_SHAPE('name',$,#637538237);
+#637538246= SHAPE_DEFINITION_REPRESENTATION(#637538245,#637538247);
+#637538247= POINT_REPRESENTATION('point_representation_name_1',(
+#637538249,#637538357),#637538255);
+#637538249= NODE_SET('node_set_name_1',(#637538251,#637538293,#637538297
+,#637538301,#637538305,#637538309,#637538313,#637538317,#637538321,
+#637538325,#637538329,#637538333,#637538337,#637538341,#637538345,
+#637538349,#637538353));
+#637538251= NODE('1',(#637538253),#637538255,#637538280);
+#637538253= CARTESIAN_POINT('1',(0.,-2.,1.));
+#637538255= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538258,#637538266,#637538269,#637538263,#637538261,#637538272,
+#637538273,#637538276,#637538279,#637538265))REPRESENTATION_CONTEXT(
+'CORD2R.1','3d'));
+#637538258= SI_ENERGY_UNIT((#637538260,#637538262,#637538264),*,$,
+.JOULE.);
+#637538260= DERIVED_UNIT_ELEMENT(#637538261,1.);
+#637538261= /* MASS_UNIT+SI_UNIT */(MASS_UNIT()NAMED_UNIT(*)SI_UNIT(
+.KILO.,.GRAM.));
+#637538262= DERIVED_UNIT_ELEMENT(#637538263,2.);
+#637538263= /* LENGTH_UNIT+SI_UNIT */(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(
+$,.METRE.));
+#637538264= DERIVED_UNIT_ELEMENT(#637538265,-2.);
+#637538265= /* SI_UNIT+TIME_UNIT */(NAMED_UNIT(*)SI_UNIT($,.SECOND.)
+TIME_UNIT());
+#637538266= SI_FORCE_UNIT((#637538260,#637538268,#637538264),*,$,
+.NEWTON.);
+#637538268= DERIVED_UNIT_ELEMENT(#637538263,1.);
+#637538269= SI_FREQUENCY_UNIT((#637538271),*,$,.HERTZ.);
+#637538271= DERIVED_UNIT_ELEMENT(#637538265,-1.);
+#637538272= /* PLANE_ANGLE_UNIT+SI_UNIT */(NAMED_UNIT(*)PLANE_ANGLE_UNIT
+()SI_UNIT($,.RADIAN.));
+#637538273= SI_POWER_UNIT((#637538260,#637538262,#637538275),*,$,.WATT.
+);
+#637538275= DERIVED_UNIT_ELEMENT(#637538265,-3.);
+#637538276= SI_PRESSURE_UNIT((#637538260,#637538278,#637538264),*,$,
+.PASCAL.);
+#637538278= DERIVED_UNIT_ELEMENT(#637538263,-1.);
+#637538279= /* SI_UNIT+THERMODYNAMIC_TEMPERATURE_UNIT */(NAMED_UNIT(*)
+SI_UNIT($,.DEGREE_CELSIUS.)THERMODYNAMIC_TEMPERATURE_UNIT());
+#637538280= FEA_MODEL_3D('Identification',(#637538282),#637538289,
+'NASTRAN BDF Converter v0.0.0',('NASTRAN'),'AnalysisModelType');
+#637538282= FEA_AXIS2_PLACEMENT_3D('0',#637538283,#637538285,#637538287,
+.CARTESIAN.,'FEA_BASIC_COORD_SYSTEM.0');
+#637538283= CARTESIAN_POINT('',(0.,0.,0.));
+#637538285= DIRECTION('AxisZ',(0.,0.,1.));
+#637538287= DIRECTION('RefX',(1.,0.,0.));
+#637538289= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538258,#637538266,#637538269,#637538263,#637538261,#637538272,
+#637538273,#637538276,#637538279,#637538265))REPRESENTATION_CONTEXT(
+'FEA_BASIC_COORD_SYSTEM.0','3d'));
+#637538293= NODE('2',(#637538295),#637538255,#637538280);
+#637538295= CARTESIAN_POINT('2',(1.,-2.,1.));
+#637538297= NODE('3',(#637538299),#637538255,#637538280);
+#637538299= CARTESIAN_POINT('3',(2.,-2.,1.));
+#637538301= NODE('4',(#637538303),#637538255,#637538280);
+#637538303= CARTESIAN_POINT('4',(3.,-2.,1.));
+#637538305= NODE('5',(#637538307),#637538255,#637538280);
+#637538307= CARTESIAN_POINT('5',(4.,-2.,1.));
+#637538309= NODE('6',(#637538311),#637538255,#637538280);
+#637538311= CARTESIAN_POINT('6',(5.,-2.,1.));
+#637538313= NODE('7',(#637538315),#637538255,#637538280);
+#637538315= CARTESIAN_POINT('7',(6.,-2.,1.));
+#637538317= NODE('8',(#637538319),#637538255,#637538280);
+#637538319= CARTESIAN_POINT('8',(7.,-2.,1.));
+#637538321= NODE('9',(#637538323),#637538255,#637538280);
+#637538323= CARTESIAN_POINT('9',(8.,-2.,1.));
+#637538325= NODE('10',(#637538327),#637538255,#637538280);
+#637538327= CARTESIAN_POINT('10',(9.,-2.,1.));
+#637538329= NODE('11',(#637538331),#637538255,#637538280);
+#637538331= CARTESIAN_POINT('11',(10.,-2.,1.));
+#637538333= NODE('12',(#637538335),#637538255,#637538280);
+#637538335= CARTESIAN_POINT('12',(11.,-2.,1.));
+#637538337= NODE('13',(#637538339),#637538255,#637538280);
+#637538339= CARTESIAN_POINT('13',(12.,-2.,1.));
+#637538341= NODE('14',(#637538343),#637538255,#637538280);
+#637538343= CARTESIAN_POINT('14',(13.,-2.,1.));
+#637538345= NODE('15',(#637538347),#637538255,#637538280);
+#637538347= CARTESIAN_POINT('15',(14.,-2.,1.));
+#637538349= NODE('16',(#637538351),#637538255,#637538280);
+#637538351= CARTESIAN_POINT('16',(15.,-2.,1.));
+#637538353= NODE('17',(#637538355),#637538255,#637538280);
+#637538355= CARTESIAN_POINT('17',(16.,-2.,1.));
+#637538357= FEA_AXIS2_PLACEMENT_3D('1',#637538358,#637538360,#637538362,
+.CARTESIAN.,'CORD2R.1');
+#637538358= CARTESIAN_POINT('',(0.,0.,0.));
+#637538360= DIRECTION('AxisZ',(0.,0.,1.));
+#637538362= DIRECTION('RefX',(1.,0.,0.));
+#637538364= FEA_MODEL_DEFINITION('fea_model_definition_id_1',$,
+#637538245,.U.);
+#637538365= STRUCTURAL_RESPONSE_PROPERTY(
+'structural_response_property_id_1',$,#637538364);
+#637538366= STRUCTURAL_RESPONSE_PROPERTY_DEFINITION_REPRESENTATION(
+#637538365,#637538280);
+#637538367= NAME_ATTRIBUTE('',#637538237);
+#637538368= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538369,#637538370,(
+#637538237));
+#637538369= GROUP('default-gpvv-type',$);
+#637538370= CLASSIFICATION_ROLE('view_type',$);
+#637538372= APPLIED_IDENTIFICATION_ASSIGNMENT('default-id.0',#637538373,
+(#637538238,#637538237,#637538239));
+#637538373= IDENTIFICATION_ROLE('default-role',$);
+#637538375= APPLIED_ORGANIZATION_ASSIGNMENT(#637538376,#637538377,(
+#637538372));
+#637538376= ORGANIZATION($,'default-organization',$);
+#637538377= ORGANIZATION_ROLE('id context');
+#637538379= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538380,#637538381,(
+#637538372));
+#637538380= GROUP('id',$);
+#637538381= CLASSIFICATION_ROLE('',$);
+#637538383= APPLICATION_PROTOCOL_DEFINITION('status',
+'ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies'
+,2011,#637538233);
+#637538384= DESCRIPTION_ATTRIBUTE('SimDM',#637538233);
+#637538385= ID_ATTRIBUTE('SimDM',#637538233);
+#637538386= DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.);
+#637538387= PRODUCT_RELATED_PRODUCT_CATEGORY('document',$,());
+#637538389= PRODUCT_RELATED_PRODUCT_CATEGORY('product',$,(#637538239));
+#637538391= DESCRIPTION_ATTRIBUTE('',#637538243);
+#637538392= CARTESIAN_POINT('0',(0.,0.,0.));
+#637538394= DUMMY_NODE('0',(#637538392),#637538289,#637538280);
+#637538396= ITEM_DEFINED_TRANSFORMATION('','',#637538282,#637538357);
+#637538397= REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION('','',
+#637538280,#637538247,#637538396);
+#637538398= ELEMENT_MATERIAL('MAT1.1','Fea Material',(#637538400,
+#637538415,#637538420));
+#637538400= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538401,#637538403,
+#637538407);
+#637538401= MATERIAL_PROPERTY('MAT1.1.0',$,#637538402);
+#637538402= CHARACTERIZED_OBJECT('material_property',$);
+#637538403= REPRESENTATION('representation_id_2',(#637538405),#637538289
+);
+#637538405= FEA_LINEAR_ELASTICITY('',FEA_ISOTROPIC_SYMMETRIC_TENSOR4_3D(
+(10000000.,0.33)));
+#637538407= DATA_ENVIRONMENT('DATA_ENV','Property_conditions',(
+#637538409));
+#637538409= PROPERTY_DEFINITION_REPRESENTATION(#637538410,#637538412);
+#637538410= PROPERTY_DEFINITION('Material Property Definition',$,
+#637538411);
+#637538411= CHARACTERIZED_OBJECT('property',$);
+#637538412= REPRESENTATION('representation_id_1',(#637538414),#637538289
+);
+#637538414= MEASURE_REPRESENTATION_ITEM('representation_item_name_1',
+CONTEXT_DEPENDENT_MEASURE(70.),#637538279);
+#637538415= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538416,#637538417,
+#637538407);
+#637538416= MATERIAL_PROPERTY('MAT1.1.1',$,#637538402);
+#637538417= REPRESENTATION('representation_id_3',(#637538419),#637538289
+);
+#637538419= FEA_MASS_DENSITY('',0.000254);
+#637538420= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538421,#637538422,
+#637538407);
+#637538421= MATERIAL_PROPERTY('MAT1.1.2',$,#637538402);
+#637538422= REPRESENTATION('representation_id_4',(#637538424),#637538289
+);
+#637538424= FEA_TANGENTIAL_COEFFICIENT_OF_LINEAR_THERMAL_EXPANSION('',
+ISOTROPIC_SYMMETRIC_TENSOR2_3D(0.));
+#637538425= CURVE_3D_ELEMENT_REPRESENTATION('16',(#637538427,#637538431)
+,#637538433,(#637538349,#637538353),#637538280,#637538437,#637538443,
+#637538398);
+#637538427= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538428
+);
+#637538428= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538429);
+#637538429= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538431= FEA_PARAMETRIC_POINT('',(1.,0.,0.));
+#637538433= PARAMETRIC_REPRESENTATION_CONTEXT(
+'parametric_representation_context','parametric');
+#637538437= CURVE_3D_ELEMENT_DESCRIPTOR(.LINEAR.,'LINEAR_CURVE.CBAR*',((
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.AXIAL.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.Y_Y_BENDING.),
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.Z_Z_BENDING.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.TORSION.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.X_Y_SHEAR.),
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.X_Z_SHEAR.))));
+#637538443= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538445),(
+#637538456,#637538458),(#637538461,#637538468));
+#637538445= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538446,#637538447,
+#637538449);
+#637538446= CURVE_ELEMENT_LOCATION(#637538431);
+#637538447= EULER_ANGLES((0.,0.,0.));
+#637538449= CURVE_ELEMENT_SECTION_DERIVED_DEFINITIONS('PBAR.1',0.,8.,(
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)),(2.667,
+10.667,0.),0.,CONTEXT_DEPENDENT_MEASURE(0.),(CONTEXT_DEPENDENT_MEASURE(
+0.),CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.));
+#637538456= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538458= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538461= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538463= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.X_TRANSLATION.),0.);
+#637538464= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.Y_TRANSLATION.),0.);
+#637538465= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.Z_TRANSLATION.),0.);
+#637538466= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.X_ROTATION.),0.);
+#637538467= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.Z_ROTATION.),0.);
+#637538468= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538470= CURVE_3D_ELEMENT_REPRESENTATION('15',(#637538472,#637538431)
+,#637538433,(#637538345,#637538349),#637538280,#637538437,#637538477,
+#637538398);
+#637538472= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538473
+);
+#637538473= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538474);
+#637538474= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538477= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538479),(
+#637538484,#637538486),(#637538489,#637538491));
+#637538479= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538480,#637538481,
+#637538449);
+#637538480= CURVE_ELEMENT_LOCATION(#637538431);
+#637538481= EULER_ANGLES((0.,0.,0.));
+#637538484= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538486= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538489= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538491= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538493= CURVE_3D_ELEMENT_REPRESENTATION('14',(#637538495,#637538431)
+,#637538433,(#637538341,#637538345),#637538280,#637538437,#637538500,
+#637538398);
+#637538495= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538496
+);
+#637538496= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538497);
+#637538497= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538500= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538502),(
+#637538507,#637538509),(#637538512,#637538514));
+#637538502= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538503,#637538504,
+#637538449);
+#637538503= CURVE_ELEMENT_LOCATION(#637538431);
+#637538504= EULER_ANGLES((0.,0.,0.));
+#637538507= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538509= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538512= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538514= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538516= CURVE_3D_ELEMENT_REPRESENTATION('13',(#637538518,#637538431)
+,#637538433,(#637538337,#637538341),#637538280,#637538437,#637538523,
+#637538398);
+#637538518= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538519
+);
+#637538519= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538520);
+#637538520= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538523= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538525),(
+#637538530,#637538532),(#637538535,#637538537));
+#637538525= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538526,#637538527,
+#637538449);
+#637538526= CURVE_ELEMENT_LOCATION(#637538431);
+#637538527= EULER_ANGLES((0.,0.,0.));
+#637538530= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538532= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538535= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538537= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538539= CURVE_3D_ELEMENT_REPRESENTATION('12',(#637538541,#637538431)
+,#637538433,(#637538333,#637538337),#637538280,#637538437,#637538546,
+#637538398);
+#637538541= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538542
+);
+#637538542= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538543);
+#637538543= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538546= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538548),(
+#637538553,#637538555),(#637538558,#637538560));
+#637538548= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538549,#637538550,
+#637538449);
+#637538549= CURVE_ELEMENT_LOCATION(#637538431);
+#637538550= EULER_ANGLES((0.,0.,0.));
+#637538553= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538555= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538558= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538560= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538562= CURVE_3D_ELEMENT_REPRESENTATION('11',(#637538564,#637538431)
+,#637538433,(#637538329,#637538333),#637538280,#637538437,#637538569,
+#637538398);
+#637538564= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538565
+);
+#637538565= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538566);
+#637538566= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538569= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538571),(
+#637538576,#637538578),(#637538581,#637538583));
+#637538571= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538572,#637538573,
+#637538449);
+#637538572= CURVE_ELEMENT_LOCATION(#637538431);
+#637538573= EULER_ANGLES((0.,0.,0.));
+#637538576= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538578= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538581= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538583= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538585= CURVE_3D_ELEMENT_REPRESENTATION('10',(#637538587,#637538431)
+,#637538433,(#637538325,#637538329),#637538280,#637538437,#637538592,
+#637538398);
+#637538587= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538588
+);
+#637538588= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538589);
+#637538589= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538592= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538594),(
+#637538599,#637538601),(#637538604,#637538606));
+#637538594= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538595,#637538596,
+#637538449);
+#637538595= CURVE_ELEMENT_LOCATION(#637538431);
+#637538596= EULER_ANGLES((0.,0.,0.));
+#637538599= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538601= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538604= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538606= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538608= CURVE_3D_ELEMENT_REPRESENTATION('9',(#637538610,#637538431),
+#637538433,(#637538321,#637538325),#637538280,#637538437,#637538615,
+#637538398);
+#637538610= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538611
+);
+#637538611= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538612);
+#637538612= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538615= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538617),(
+#637538622,#637538624),(#637538627,#637538629));
+#637538617= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538618,#637538619,
+#637538449);
+#637538618= CURVE_ELEMENT_LOCATION(#637538431);
+#637538619= EULER_ANGLES((0.,0.,0.));
+#637538622= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538624= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538627= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538629= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538631= CURVE_3D_ELEMENT_REPRESENTATION('8',(#637538633,#637538431),
+#637538433,(#637538317,#637538321),#637538280,#637538437,#637538638,
+#637538398);
+#637538633= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538634
+);
+#637538634= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538635);
+#637538635= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538638= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538640),(
+#637538645,#637538647),(#637538650,#637538652));
+#637538640= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538641,#637538642,
+#637538449);
+#637538641= CURVE_ELEMENT_LOCATION(#637538431);
+#637538642= EULER_ANGLES((0.,0.,0.));
+#637538645= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538647= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538650= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538652= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538654= CURVE_3D_ELEMENT_REPRESENTATION('7',(#637538656,#637538431),
+#637538433,(#637538313,#637538317),#637538280,#637538437,#637538661,
+#637538398);
+#637538656= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538657
+);
+#637538657= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538658);
+#637538658= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538661= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538663),(
+#637538668,#637538670),(#637538673,#637538675));
+#637538663= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538664,#637538665,
+#637538449);
+#637538664= CURVE_ELEMENT_LOCATION(#637538431);
+#637538665= EULER_ANGLES((0.,0.,0.));
+#637538668= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538670= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538673= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538675= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538677= CURVE_3D_ELEMENT_REPRESENTATION('6',(#637538679,#637538431),
+#637538433,(#637538309,#637538313),#637538280,#637538437,#637538684,
+#637538398);
+#637538679= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538680
+);
+#637538680= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538681);
+#637538681= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538684= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538686),(
+#637538691,#637538693),(#637538696,#637538698));
+#637538686= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538687,#637538688,
+#637538449);
+#637538687= CURVE_ELEMENT_LOCATION(#637538431);
+#637538688= EULER_ANGLES((0.,0.,0.));
+#637538691= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538693= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538696= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538698= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538700= CURVE_3D_ELEMENT_REPRESENTATION('5',(#637538702,#637538431),
+#637538433,(#637538305,#637538309),#637538280,#637538437,#637538707,
+#637538398);
+#637538702= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538703
+);
+#637538703= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538704);
+#637538704= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538707= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538709),(
+#637538714,#637538716),(#637538719,#637538721));
+#637538709= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538710,#637538711,
+#637538449);
+#637538710= CURVE_ELEMENT_LOCATION(#637538431);
+#637538711= EULER_ANGLES((0.,0.,0.));
+#637538714= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538716= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538719= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538721= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538723= CURVE_3D_ELEMENT_REPRESENTATION('4',(#637538725,#637538431),
+#637538433,(#637538301,#637538305),#637538280,#637538437,#637538730,
+#637538398);
+#637538725= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538726
+);
+#637538726= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538727);
+#637538727= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538730= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538732),(
+#637538737,#637538739),(#637538742,#637538744));
+#637538732= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538733,#637538734,
+#637538449);
+#637538733= CURVE_ELEMENT_LOCATION(#637538431);
+#637538734= EULER_ANGLES((0.,0.,0.));
+#637538737= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538739= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538742= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538744= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538746= CURVE_3D_ELEMENT_REPRESENTATION('3',(#637538748,#637538431),
+#637538433,(#637538297,#637538301),#637538280,#637538437,#637538753,
+#637538398);
+#637538748= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538749
+);
+#637538749= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538750);
+#637538750= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538753= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538755),(
+#637538760,#637538762),(#637538765,#637538767));
+#637538755= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538756,#637538757,
+#637538449);
+#637538756= CURVE_ELEMENT_LOCATION(#637538431);
+#637538757= EULER_ANGLES((0.,0.,0.));
+#637538760= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538762= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538765= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538767= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538769= CURVE_3D_ELEMENT_REPRESENTATION('2',(#637538771,#637538431),
+#637538433,(#637538293,#637538297),#637538280,#637538437,#637538776,
+#637538398);
+#637538771= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538772
+);
+#637538772= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538773);
+#637538773= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538776= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538778),(
+#637538783,#637538785),(#637538788,#637538790));
+#637538778= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538779,#637538780,
+#637538449);
+#637538779= CURVE_ELEMENT_LOCATION(#637538431);
+#637538780= EULER_ANGLES((0.,0.,0.));
+#637538783= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538785= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538788= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538790= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538792= CURVE_3D_ELEMENT_REPRESENTATION('1',(#637538794,#637538431),
+#637538433,(#637538251,#637538293),#637538280,#637538437,#637538799,
+#637538398);
+#637538794= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538795
+);
+#637538795= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538796);
+#637538796= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538799= CURVE_3D_ELEMENT_PROPERTY('PBAR.1','',(#637538801),(
+#637538806,#637538808),(#637538811,#637538813));
+#637538801= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538802,#637538803,
+#637538449);
+#637538802= CURVE_ELEMENT_LOCATION(#637538431);
+#637538803= EULER_ANGLES((0.,0.,0.));
+#637538806= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538808= CURVE_ELEMENT_END_OFFSET(#637538282,(0.,0.,0.));
+#637538811= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538813= CURVE_ELEMENT_END_RELEASE(#637538282,(#637538463,#637538464,
+#637538465,#637538466,#637538467));
+#637538815= ID_ATTRIBUTE('MAT1.1',#637538410);
+#637538816= DESCRIPTION_ATTRIBUTE('Elasticity',#637538400);
+#637538817= DESCRIPTION_ATTRIBUTE('MassDensity',#637538415);
+#637538818= DESCRIPTION_ATTRIBUTE('TangentCTE',#637538420);
+#637538819= CONTROL(#637538280,'Control.0','FemConvert',
+'MSC.NASTRAN JOB CREATED ON 10-JUL-00 AT 06:54:00',('<SOL>101</SOL>',
+'TIME 600','CEND','<GLOBALCASE>0</GLOBALCASE>','<SUBCASE>1</SUBCASE>',
+'<SUBCASE>2</SUBCASE>','ENDDATA'),('NASTRAN'));
+#637538822= CONTROL_LINEAR_STATIC_ANALYSIS_STEP(#637538819,
+'STATIC STEP 2',2,#637538823,'',#637538824);
+#637538823= SPECIFIED_STATE('STEP DEFAULT','default_initial_state');
+#637538824= CONTROL_LINEAR_STATIC_LOAD_INCREMENT_PROCESS('STATIC STEP 2'
+,'',#637538825);
+#637538825= SPECIFIED_STATE('Step 2 Base Specified State',
+'Relating Specified State');
+#637538826= OUTPUT_REQUEST_STATE('Step 2 Output Request State','',(
+#637538822));
+#637538828= NODAL_FREEDOM_VALUES(#637538826,#637538829,#637538282,
+#637538831,(UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.)));
+#637538829= NODE_GROUP('','ALL',#637538280,(#637538251,#637538293,
+#637538297,#637538301,#637538305,#637538309,#637538313,#637538317,
+#637538321,#637538325,#637538329,#637538333,#637538337,#637538341,
+#637538345,#637538349,#637538353));
+#637538831= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.X_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(.Z_ROTATION.)));
+#637538834= SINGLE_POINT_CONSTRAINT_ELEMENT('SPC1_1.0',(#637538836,
+#637538822),#637538251,#637538282,(#637538840,#637538841,#637538842,
+#637538843,#637538844,#637538845),'');
+#637538836= CONTROL_LINEAR_STATIC_ANALYSIS_STEP(#637538819,
+'STATIC STEP 1',1,#637538823,'',#637538837);
+#637538837= CONTROL_LINEAR_STATIC_LOAD_INCREMENT_PROCESS('STATIC STEP 1'
+,'',#637538838);
+#637538838= SPECIFIED_STATE('Step 1 Base Specified State',
+'Relating Specified State');
+#637538840= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.X_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538841= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538842= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Z_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538843= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.X_ROTATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538844= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538845= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Z_ROTATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538846= SINGLE_POINT_CONSTRAINT_ELEMENT_VALUES(#637538847,#637538834
+,#637538848,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)
+,CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538847= SPECIFIED_STATE('SPCVALSTATE_1_2','');
+#637538848= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.X_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(.Z_ROTATION.)));
+#637538851= SPECIFIED_STATE('SPCCASE_2_2_1','Aggregator SPC 2 Step 1');
+#637538852= STATE_RELATIONSHIP(
+'SPCCASE_2_2_1 is related to Step 1 Base Specified State','',#637538838,
+#637538851);
+#637538853= STATE_RELATIONSHIP(
+'SPCVALSTATE_1_2 is related to SPCCASE_2_2_1','',#637538851,#637538847);
+#637538854= LINEARLY_SUPERIMPOSED_STATE('LOADSTATECOMBINATION_2',
+'Overall Factor Combined State');
+#637538856= STATE_RELATIONSHIP(
+'LOADSTATECOMBINATION_2 is related to Step 2 Base Specified State','',
+#637538825,#637538854);
+#637538857= STATE_RELATIONSHIP(
+'LOADSTATECOMBINATION_2 is related to Step 1 Base Specified State','',
+#637538838,#637538854);
+#637538858= STATE_COMPONENT('OverallComp','',#637538854,1.);
+#637538860= STATE_RELATIONSHIP(
+'LOADSTATEITEM_4 is related to OverallComp','',#637538858,#637538861);
+#637538861= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_4',
+'Item Factor State');
+#637538862= STATE_RELATIONSHIP(
+'LOADSTATEITEM_3 is related to OverallComp','',#637538858,#637538863);
+#637538863= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_3',
+'Item Factor State');
+#637538864= STATE_RELATIONSHIP(
+'LOADSTATEITEM_1 is related to OverallComp','',#637538858,#637538865);
+#637538865= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_1',
+'Item Factor State');
+#637538866= SPECIFIED_STATE('LOADSTATECORE_1',
+'Core Loads Specified State');
+#637538867= STATE_RELATIONSHIP(
+'LOADSTATECORE_1 is related to ItemComp_2_1','',#637538868,#637538866);
+#637538868= STATE_COMPONENT('ItemComp_2_1','',#637538865,1.);
+#637538870= NODAL_FREEDOM_ACTION_DEFINITION(#637538866,#637538353,
+#637538282,#637538871,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-1010.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538871= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.)));
+#637538874= SPECIFIED_STATE('LOADSTATECORE_3',
+'Core Loads Specified State');
+#637538875= STATE_RELATIONSHIP(
+'LOADSTATECORE_3 is related to ItemComp_2_3','',#637538876,#637538874);
+#637538876= STATE_COMPONENT('ItemComp_2_3','',#637538863,1.);
+#637538878= NODAL_FREEDOM_ACTION_DEFINITION(#637538874,#637538329,
+#637538282,#637538871,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-10.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538880= SPECIFIED_STATE('LOADSTATECORE_4',
+'Core Loads Specified State');
+#637538881= STATE_RELATIONSHIP(
+'LOADSTATECORE_4 is related to ItemComp_2_4','',#637538882,#637538880);
+#637538882= STATE_COMPONENT('ItemComp_2_4','',#637538861,1.);
+#637538884= NODAL_FREEDOM_ACTION_DEFINITION(#637538880,#637538349,
+#637538282,#637538871,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538886= NODAL_FREEDOM_ACTION_DEFINITION(#637538880,#637538345,
+#637538282,#637538871,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538888= NODAL_FREEDOM_ACTION_DEFINITION(#637538880,#637538341,
+#637538282,#637538871,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538890= NODAL_FREEDOM_ACTION_DEFINITION(#637538880,#637538337,
+#637538282,#637538871,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538892= NODAL_FREEDOM_ACTION_DEFINITION(#637538880,#637538333,
+#637538282,#637538871,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538894= OUTPUT_REQUEST_STATE('Step 1 Output Request State','',(
+#637538836));
+#637538896= NODAL_FREEDOM_VALUES(#637538894,#637538829,#637538282,
+#637538831,(UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.)));
+#637538898= ID_ATTRIBUTE('ALL',#637538829);
+#637538899= SPECIFIED_STATE('SPCCASE_2_2_2','Aggregator SPC 2 Step 2');
+#637538900= STATE_RELATIONSHIP(
+'SPCCASE_2_2_2 is related to Step 2 Base Specified State','',#637538825,
+#637538899);
+ENDSEC;
+
+END-ISO-10303-21;

data/cd209/ATS2Mod0-outresult.stp

@@ -0,0 +1,851 @@
+ISO-10303-21;
+HEADER;
+
+/******************************************************************************************
+* STEP Physical File produced by: The EXPRESS Data Manager Version 5.01.0100.b03 SimDM : 25 Apr 2012
+* Module:                         EDMstepFileFactory/EDMstandAlone
+* Creation date:                  Mon Jul 09 13:15:29 2012
+* Host:                           AER4WA926171Z
+* Database:                       C:\Documents and Settings\johnsjc2\Desktop\AP209\SimDM2010\DevCM\db\d
+* Database version:               5207
+* Database creation date:         Wed Apr 18 15:33:55 2012
+* Schema:                         AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF
+* Model:                          DataRepository.FemTest
+* Model creation date:            Mon Jul 09 13:15:29 2012
+* Header model:                   
+* EDMuser:                        superuser
+* EDMgroup:                       
+* License ID and type:            5565 : Project license. Expiry date: 31 Dec 2012
+* EDMstepFileFactory options:     010000000
+******************************************************************************************/
+
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME(
+'C:\\Documents and Settings\\johnsjc2\\Desktop\\AP209\\SimDM2010\\DevCM\\db\\d.DataRepository.FemTest'
+
+,
+          '2012-07-09T13:15:29',
+          ('ANONYMOUS USER'),
+          ('ANONYMOUS ORGANISATION'),
+          'The EXPRESS Data Manager Version 5.01.0100.b03 SimDM : 25 Apr 2012',
+          '',
+          '');
+FILE_SCHEMA(('AP209_MULTIDISCIPLINARY_ANALYSIS_AND_DESIGN_MIM_LF'));
+ENDSEC;
+
+DATA;
+#637538235= APPLICATION_CONTEXT('SimDM');
+#637538237= PRODUCT_DEFINITION_CONTEXT('assembly definition',#637538235,
+'life cycle stage');
+#637538239= PRODUCT_DEFINITION('default-id.0',$,#637538240,#637538244);
+#637538240= PRODUCT_DEFINITION_FORMATION('default-id.0','',#637538241);
+#637538241= PRODUCT('default-id.0','default-fea-part','',(#637538243));
+#637538243= PRODUCT_CONTEXT('design_context',#637538235,'design_context'
+);
+#637538244= PRODUCT_DEFINITION_CONTEXT(
+'product_definition_context_name_1',#637538245,'ANALYSIS-STAGE');
+#637538245= APPLICATION_CONTEXT('FEA-ANALYSIS-DOMAIN');
+#637538247= PRODUCT_DEFINITION_SHAPE('name',$,#637538239);
+#637538248= SHAPE_DEFINITION_REPRESENTATION(#637538247,#637538249);
+#637538249= POINT_REPRESENTATION('point_representation_name_1',(
+#637538251,#637538359),#637538257);
+#637538251= NODE_SET('node_set_name_1',(#637538253,#637538295,#637538299
+,#637538303,#637538307,#637538311,#637538315,#637538319,#637538323,
+#637538327,#637538331,#637538335,#637538339,#637538343,#637538347,
+#637538351,#637538355));
+#637538253= NODE('1',(#637538255),#637538257,#637538282);
+#637538255= CARTESIAN_POINT('1',(0.,-2.,1.));
+#637538257= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538260,#637538268,#637538271,#637538265,#637538263,#637538274,
+#637538275,#637538278,#637538281,#637538267))REPRESENTATION_CONTEXT(
+'CORD2R.1','3d'));
+#637538260= SI_ENERGY_UNIT((#637538262,#637538264,#637538266),*,$,
+.JOULE.);
+#637538262= DERIVED_UNIT_ELEMENT(#637538263,1.);
+#637538263= /* MASS_UNIT+SI_UNIT */(MASS_UNIT()NAMED_UNIT(*)SI_UNIT(
+.KILO.,.GRAM.));
+#637538264= DERIVED_UNIT_ELEMENT(#637538265,2.);
+#637538265= /* LENGTH_UNIT+SI_UNIT */(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(
+$,.METRE.));
+#637538266= DERIVED_UNIT_ELEMENT(#637538267,-2.);
+#637538267= /* SI_UNIT+TIME_UNIT */(NAMED_UNIT(*)SI_UNIT($,.SECOND.)
+TIME_UNIT());
+#637538268= SI_FORCE_UNIT((#637538262,#637538270,#637538266),*,$,
+.NEWTON.);
+#637538270= DERIVED_UNIT_ELEMENT(#637538265,1.);
+#637538271= SI_FREQUENCY_UNIT((#637538273),*,$,.HERTZ.);
+#637538273= DERIVED_UNIT_ELEMENT(#637538267,-1.);
+#637538274= /* PLANE_ANGLE_UNIT+SI_UNIT */(NAMED_UNIT(*)PLANE_ANGLE_UNIT
+()SI_UNIT($,.RADIAN.));
+#637538275= SI_POWER_UNIT((#637538262,#637538264,#637538277),*,$,.WATT.
+);
+#637538277= DERIVED_UNIT_ELEMENT(#637538267,-3.);
+#637538278= SI_PRESSURE_UNIT((#637538262,#637538280,#637538266),*,$,
+.PASCAL.);
+#637538280= DERIVED_UNIT_ELEMENT(#637538265,-1.);
+#637538281= /* SI_UNIT+THERMODYNAMIC_TEMPERATURE_UNIT */(NAMED_UNIT(*)
+SI_UNIT($,.DEGREE_CELSIUS.)THERMODYNAMIC_TEMPERATURE_UNIT());
+#637538282= FEA_MODEL_3D('Identification',(#637538284),#637538291,
+'NASTRAN BDF Converter v0.0.0',('NASTRAN'),'AnalysisModelType');
+#637538284= FEA_AXIS2_PLACEMENT_3D('0',#637538285,#637538287,#637538289,
+.CARTESIAN.,'FEA_BASIC_COORD_SYSTEM.0');
+#637538285= CARTESIAN_POINT('',(0.,0.,0.));
+#637538287= DIRECTION('AxisZ',(0.,0.,1.));
+#637538289= DIRECTION('RefX',(1.,0.,0.));
+#637538291= 
+/* GEOMETRIC_REPRESENTATION_CONTEXT+GLOBAL_UNIT_ASSIGNED_CONTEXT */(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((
+#637538260,#637538268,#637538271,#637538265,#637538263,#637538274,
+#637538275,#637538278,#637538281,#637538267))REPRESENTATION_CONTEXT(
+'FEA_BASIC_COORD_SYSTEM.0','3d'));
+#637538295= NODE('2',(#637538297),#637538257,#637538282);
+#637538297= CARTESIAN_POINT('2',(1.,-2.,1.));
+#637538299= NODE('3',(#637538301),#637538257,#637538282);
+#637538301= CARTESIAN_POINT('3',(2.,-2.,1.));
+#637538303= NODE('4',(#637538305),#637538257,#637538282);
+#637538305= CARTESIAN_POINT('4',(3.,-2.,1.));
+#637538307= NODE('5',(#637538309),#637538257,#637538282);
+#637538309= CARTESIAN_POINT('5',(4.,-2.,1.));
+#637538311= NODE('6',(#637538313),#637538257,#637538282);
+#637538313= CARTESIAN_POINT('6',(5.,-2.,1.));
+#637538315= NODE('7',(#637538317),#637538257,#637538282);
+#637538317= CARTESIAN_POINT('7',(6.,-2.,1.));
+#637538319= NODE('8',(#637538321),#637538257,#637538282);
+#637538321= CARTESIAN_POINT('8',(7.,-2.,1.));
+#637538323= NODE('9',(#637538325),#637538257,#637538282);
+#637538325= CARTESIAN_POINT('9',(8.,-2.,1.));
+#637538327= NODE('10',(#637538329),#637538257,#637538282);
+#637538329= CARTESIAN_POINT('10',(9.,-2.,1.));
+#637538331= NODE('11',(#637538333),#637538257,#637538282);
+#637538333= CARTESIAN_POINT('11',(10.,-2.,1.));
+#637538335= NODE('12',(#637538337),#637538257,#637538282);
+#637538337= CARTESIAN_POINT('12',(11.,-2.,1.));
+#637538339= NODE('13',(#637538341),#637538257,#637538282);
+#637538341= CARTESIAN_POINT('13',(12.,-2.,1.));
+#637538343= NODE('14',(#637538345),#637538257,#637538282);
+#637538345= CARTESIAN_POINT('14',(13.,-2.,1.));
+#637538347= NODE('15',(#637538349),#637538257,#637538282);
+#637538349= CARTESIAN_POINT('15',(14.,-2.,1.));
+#637538351= NODE('16',(#637538353),#637538257,#637538282);
+#637538353= CARTESIAN_POINT('16',(15.,-2.,1.));
+#637538355= NODE('17',(#637538357),#637538257,#637538282);
+#637538357= CARTESIAN_POINT('17',(16.,-2.,1.));
+#637538359= FEA_AXIS2_PLACEMENT_3D('1',#637538360,#637538362,#637538364,
+.CARTESIAN.,'CORD2R.1');
+#637538360= CARTESIAN_POINT('',(0.,0.,0.));
+#637538362= DIRECTION('AxisZ',(0.,0.,1.));
+#637538364= DIRECTION('RefX',(1.,0.,0.));
+#637538366= FEA_MODEL_DEFINITION('fea_model_definition_id_1',$,
+#637538247,.U.);
+#637538367= STRUCTURAL_RESPONSE_PROPERTY(
+'structural_response_property_id_1',$,#637538366);
+#637538368= STRUCTURAL_RESPONSE_PROPERTY_DEFINITION_REPRESENTATION(
+#637538367,#637538282);
+#637538369= NAME_ATTRIBUTE('',#637538239);
+#637538370= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538371,#637538372,(
+#637538239));
+#637538371= GROUP('default-gpvv-type',$);
+#637538372= CLASSIFICATION_ROLE('view_type',$);
+#637538374= APPLIED_IDENTIFICATION_ASSIGNMENT('default-id.0',#637538375,
+(#637538240,#637538239,#637538241));
+#637538375= IDENTIFICATION_ROLE('default-role',$);
+#637538377= APPLIED_ORGANIZATION_ASSIGNMENT(#637538378,#637538379,(
+#637538374));
+#637538378= ORGANIZATION($,'default-organization',$);
+#637538379= ORGANIZATION_ROLE('id context');
+#637538381= APPLIED_CLASSIFICATION_ASSIGNMENT(#637538382,#637538383,(
+#637538374));
+#637538382= GROUP('id',$);
+#637538383= CLASSIFICATION_ROLE('',$);
+#637538385= APPLICATION_PROTOCOL_DEFINITION('status',
+'ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies'
+,2011,#637538235);
+#637538386= DESCRIPTION_ATTRIBUTE('SimDM',#637538235);
+#637538387= ID_ATTRIBUTE('SimDM',#637538235);
+#637538388= DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.);
+#637538389= PRODUCT_RELATED_PRODUCT_CATEGORY('document',$,());
+#637538391= PRODUCT_RELATED_PRODUCT_CATEGORY('product',$,(#637538241));
+#637538393= DESCRIPTION_ATTRIBUTE('',#637538245);
+#637538394= CARTESIAN_POINT('0',(0.,0.,0.));
+#637538396= DUMMY_NODE('0',(#637538394),#637538291,#637538282);
+#637538398= ITEM_DEFINED_TRANSFORMATION('','',#637538284,#637538359);
+#637538399= REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION('','',
+#637538282,#637538249,#637538398);
+#637538400= ELEMENT_MATERIAL('MAT1.1','Fea Material',(#637538402,
+#637538417,#637538422));
+#637538402= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538403,#637538405,
+#637538409);
+#637538403= MATERIAL_PROPERTY('MAT1.1.0',$,#637538404);
+#637538404= CHARACTERIZED_OBJECT('material_property',$);
+#637538405= REPRESENTATION('representation_id_2',(#637538407),#637538291
+);
+#637538407= FEA_LINEAR_ELASTICITY('',FEA_ISOTROPIC_SYMMETRIC_TENSOR4_3D(
+(10000000.,0.33)));
+#637538409= DATA_ENVIRONMENT('DATA_ENV','Property_conditions',(
+#637538411));
+#637538411= PROPERTY_DEFINITION_REPRESENTATION(#637538412,#637538414);
+#637538412= PROPERTY_DEFINITION('Material Property Definition',$,
+#637538413);
+#637538413= CHARACTERIZED_OBJECT('property',$);
+#637538414= REPRESENTATION('representation_id_1',(#637538416),#637538291
+);
+#637538416= MEASURE_REPRESENTATION_ITEM('representation_item_name_1',
+CONTEXT_DEPENDENT_MEASURE(70.),#637538281);
+#637538417= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538418,#637538419,
+#637538409);
+#637538418= MATERIAL_PROPERTY('MAT1.1.1',$,#637538404);
+#637538419= REPRESENTATION('representation_id_3',(#637538421),#637538291
+);
+#637538421= FEA_MASS_DENSITY('',0.000254);
+#637538422= FEA_MATERIAL_PROPERTY_REPRESENTATION(#637538423,#637538424,
+#637538409);
+#637538423= MATERIAL_PROPERTY('MAT1.1.2',$,#637538404);
+#637538424= REPRESENTATION('representation_id_4',(#637538426),#637538291
+);
+#637538426= FEA_TANGENTIAL_COEFFICIENT_OF_LINEAR_THERMAL_EXPANSION('',
+ISOTROPIC_SYMMETRIC_TENSOR2_3D(0.));
+#637538427= CURVE_3D_ELEMENT_REPRESENTATION('16',(#637538429,#637538433)
+,#637538435,(#637538351,#637538355),#637538282,#637538439,#637538445,
+#637538400);
+#637538429= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538430
+);
+#637538430= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538431);
+#637538431= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538433= FEA_PARAMETRIC_POINT('',(1.,0.,0.));
+#637538435= PARAMETRIC_REPRESENTATION_CONTEXT(
+'parametric_representation_context','parametric');
+#637538439= CURVE_3D_ELEMENT_DESCRIPTOR(.LINEAR.,'LINEAR_CURVE.CBAR*',((
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.AXIAL.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.Y_Y_BENDING.),
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.Z_Z_BENDING.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.TORSION.)),(
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.X_Y_SHEAR.),
+ENUMERATED_CURVE_ELEMENT_PURPOSE(.X_Z_SHEAR.))));
+#637538445= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.16','',(#637538447),(
+#637538458,#637538460),(#637538463,#637538470));
+#637538447= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538448,#637538449,
+#637538451);
+#637538448= CURVE_ELEMENT_LOCATION(#637538433);
+#637538449= EULER_ANGLES((0.,0.,0.));
+#637538451= CURVE_ELEMENT_SECTION_DERIVED_DEFINITIONS('PBAR.1_0',0.,8.,(
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)),(2.667,
+10.667,0.),0.,CONTEXT_DEPENDENT_MEASURE(0.),(CONTEXT_DEPENDENT_MEASURE(
+0.),CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.)),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.));
+#637538458= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538460= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538463= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538465= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.X_TRANSLATION.),0.);
+#637538466= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.Y_TRANSLATION.),0.);
+#637538467= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.Z_TRANSLATION.),0.);
+#637538468= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.X_ROTATION.),0.);
+#637538469= CURVE_ELEMENT_END_RELEASE_PACKET(
+ENUMERATED_CURVE_ELEMENT_FREEDOM(.Z_ROTATION.),0.);
+#637538470= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538472= CURVE_3D_ELEMENT_REPRESENTATION('15',(#637538474,#637538433)
+,#637538435,(#637538347,#637538351),#637538282,#637538439,#637538479,
+#637538400);
+#637538474= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538475
+);
+#637538475= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538476);
+#637538476= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538479= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.15','',(#637538481),(
+#637538486,#637538488),(#637538491,#637538493));
+#637538481= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538482,#637538483,
+#637538451);
+#637538482= CURVE_ELEMENT_LOCATION(#637538433);
+#637538483= EULER_ANGLES((0.,0.,0.));
+#637538486= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538488= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538491= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538493= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538495= CURVE_3D_ELEMENT_REPRESENTATION('14',(#637538497,#637538433)
+,#637538435,(#637538343,#637538347),#637538282,#637538439,#637538502,
+#637538400);
+#637538497= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538498
+);
+#637538498= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538499);
+#637538499= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538502= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.14','',(#637538504),(
+#637538509,#637538511),(#637538514,#637538516));
+#637538504= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538505,#637538506,
+#637538451);
+#637538505= CURVE_ELEMENT_LOCATION(#637538433);
+#637538506= EULER_ANGLES((0.,0.,0.));
+#637538509= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538511= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538514= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538516= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538518= CURVE_3D_ELEMENT_REPRESENTATION('13',(#637538520,#637538433)
+,#637538435,(#637538339,#637538343),#637538282,#637538439,#637538525,
+#637538400);
+#637538520= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538521
+);
+#637538521= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538522);
+#637538522= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538525= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.13','',(#637538527),(
+#637538532,#637538534),(#637538537,#637538539));
+#637538527= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538528,#637538529,
+#637538451);
+#637538528= CURVE_ELEMENT_LOCATION(#637538433);
+#637538529= EULER_ANGLES((0.,0.,0.));
+#637538532= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538534= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538537= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538539= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538541= CURVE_3D_ELEMENT_REPRESENTATION('12',(#637538543,#637538433)
+,#637538435,(#637538335,#637538339),#637538282,#637538439,#637538548,
+#637538400);
+#637538543= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538544
+);
+#637538544= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538545);
+#637538545= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538548= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.12','',(#637538550),(
+#637538555,#637538557),(#637538560,#637538562));
+#637538550= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538551,#637538552,
+#637538451);
+#637538551= CURVE_ELEMENT_LOCATION(#637538433);
+#637538552= EULER_ANGLES((0.,0.,0.));
+#637538555= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538557= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538560= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538562= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538564= CURVE_3D_ELEMENT_REPRESENTATION('11',(#637538566,#637538433)
+,#637538435,(#637538331,#637538335),#637538282,#637538439,#637538571,
+#637538400);
+#637538566= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538567
+);
+#637538567= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538568);
+#637538568= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538571= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.11','',(#637538573),(
+#637538578,#637538580),(#637538583,#637538585));
+#637538573= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538574,#637538575,
+#637538451);
+#637538574= CURVE_ELEMENT_LOCATION(#637538433);
+#637538575= EULER_ANGLES((0.,0.,0.));
+#637538578= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538580= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538583= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538585= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538587= CURVE_3D_ELEMENT_REPRESENTATION('10',(#637538589,#637538433)
+,#637538435,(#637538327,#637538331),#637538282,#637538439,#637538594,
+#637538400);
+#637538589= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538590
+);
+#637538590= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538591);
+#637538591= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538594= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.10','',(#637538596),(
+#637538601,#637538603),(#637538606,#637538608));
+#637538596= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538597,#637538598,
+#637538451);
+#637538597= CURVE_ELEMENT_LOCATION(#637538433);
+#637538598= EULER_ANGLES((0.,0.,0.));
+#637538601= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538603= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538606= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538608= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538610= CURVE_3D_ELEMENT_REPRESENTATION('9',(#637538612,#637538433),
+#637538435,(#637538323,#637538327),#637538282,#637538439,#637538617,
+#637538400);
+#637538612= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538613
+);
+#637538613= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538614);
+#637538614= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538617= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.9','',(#637538619),(
+#637538624,#637538626),(#637538629,#637538631));
+#637538619= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538620,#637538621,
+#637538451);
+#637538620= CURVE_ELEMENT_LOCATION(#637538433);
+#637538621= EULER_ANGLES((0.,0.,0.));
+#637538624= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538626= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538629= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538631= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538633= CURVE_3D_ELEMENT_REPRESENTATION('8',(#637538635,#637538433),
+#637538435,(#637538319,#637538323),#637538282,#637538439,#637538640,
+#637538400);
+#637538635= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538636
+);
+#637538636= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538637);
+#637538637= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538640= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.8','',(#637538642),(
+#637538647,#637538649),(#637538652,#637538654));
+#637538642= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538643,#637538644,
+#637538451);
+#637538643= CURVE_ELEMENT_LOCATION(#637538433);
+#637538644= EULER_ANGLES((0.,0.,0.));
+#637538647= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538649= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538652= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538654= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538656= CURVE_3D_ELEMENT_REPRESENTATION('7',(#637538658,#637538433),
+#637538435,(#637538315,#637538319),#637538282,#637538439,#637538663,
+#637538400);
+#637538658= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538659
+);
+#637538659= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538660);
+#637538660= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538663= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.7','',(#637538665),(
+#637538670,#637538672),(#637538675,#637538677));
+#637538665= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538666,#637538667,
+#637538451);
+#637538666= CURVE_ELEMENT_LOCATION(#637538433);
+#637538667= EULER_ANGLES((0.,0.,0.));
+#637538670= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538672= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538675= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538677= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538679= CURVE_3D_ELEMENT_REPRESENTATION('6',(#637538681,#637538433),
+#637538435,(#637538311,#637538315),#637538282,#637538439,#637538686,
+#637538400);
+#637538681= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538682
+);
+#637538682= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538683);
+#637538683= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538686= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.6','',(#637538688),(
+#637538693,#637538695),(#637538698,#637538700));
+#637538688= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538689,#637538690,
+#637538451);
+#637538689= CURVE_ELEMENT_LOCATION(#637538433);
+#637538690= EULER_ANGLES((0.,0.,0.));
+#637538693= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538695= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538698= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538700= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538702= CURVE_3D_ELEMENT_REPRESENTATION('5',(#637538704,#637538433),
+#637538435,(#637538307,#637538311),#637538282,#637538439,#637538709,
+#637538400);
+#637538704= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538705
+);
+#637538705= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538706);
+#637538706= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538709= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.5','',(#637538711),(
+#637538716,#637538718),(#637538721,#637538723));
+#637538711= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538712,#637538713,
+#637538451);
+#637538712= CURVE_ELEMENT_LOCATION(#637538433);
+#637538713= EULER_ANGLES((0.,0.,0.));
+#637538716= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538718= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538721= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538723= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538725= CURVE_3D_ELEMENT_REPRESENTATION('4',(#637538727,#637538433),
+#637538435,(#637538303,#637538307),#637538282,#637538439,#637538732,
+#637538400);
+#637538727= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538728
+);
+#637538728= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538729);
+#637538729= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538732= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.4','',(#637538734),(
+#637538739,#637538741),(#637538744,#637538746));
+#637538734= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538735,#637538736,
+#637538451);
+#637538735= CURVE_ELEMENT_LOCATION(#637538433);
+#637538736= EULER_ANGLES((0.,0.,0.));
+#637538739= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538741= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538744= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538746= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538748= CURVE_3D_ELEMENT_REPRESENTATION('3',(#637538750,#637538433),
+#637538435,(#637538299,#637538303),#637538282,#637538439,#637538755,
+#637538400);
+#637538750= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538751
+);
+#637538751= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538752);
+#637538752= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538755= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.3','',(#637538757),(
+#637538762,#637538764),(#637538767,#637538769));
+#637538757= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538758,#637538759,
+#637538451);
+#637538758= CURVE_ELEMENT_LOCATION(#637538433);
+#637538759= EULER_ANGLES((0.,0.,0.));
+#637538762= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538764= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538767= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538769= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538771= CURVE_3D_ELEMENT_REPRESENTATION('2',(#637538773,#637538433),
+#637538435,(#637538295,#637538299),#637538282,#637538439,#637538778,
+#637538400);
+#637538773= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538774
+);
+#637538774= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538775);
+#637538775= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538778= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.2','',(#637538780),(
+#637538785,#637538787),(#637538790,#637538792));
+#637538780= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538781,#637538782,
+#637538451);
+#637538781= CURVE_ELEMENT_LOCATION(#637538433);
+#637538782= EULER_ANGLES((0.,0.,0.));
+#637538785= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538787= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538790= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538792= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538794= CURVE_3D_ELEMENT_REPRESENTATION('1',(#637538796,#637538433),
+#637538435,(#637538253,#637538295),#637538282,#637538439,#637538801,
+#637538400);
+#637538796= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_SYSTEM('',#637538797
+);
+#637538797= PARAMETRIC_CURVE_3D_ELEMENT_COORDINATE_DIRECTION('',
+#637538798);
+#637538798= DIRECTION('dxy',(0.,7.54979000000000E-8,1.));
+#637538801= CURVE_3D_ELEMENT_PROPERTY('PBAR.1.1','',(#637538803),(
+#637538808,#637538810),(#637538813,#637538815));
+#637538803= CURVE_ELEMENT_INTERVAL_CONSTANT(#637538804,#637538805,
+#637538451);
+#637538804= CURVE_ELEMENT_LOCATION(#637538433);
+#637538805= EULER_ANGLES((0.,0.,0.));
+#637538808= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538810= CURVE_ELEMENT_END_OFFSET(#637538284,(0.,0.,0.));
+#637538813= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538815= CURVE_ELEMENT_END_RELEASE(#637538284,(#637538465,#637538466,
+#637538467,#637538468,#637538469));
+#637538817= ID_ATTRIBUTE('MAT1.1',#637538412);
+#637538818= DESCRIPTION_ATTRIBUTE('Elasticity',#637538402);
+#637538819= DESCRIPTION_ATTRIBUTE('MassDensity',#637538417);
+#637538820= DESCRIPTION_ATTRIBUTE('TangentCTE',#637538422);
+#637538821= CONTROL(#637538282,'Control.0','FemConvert',
+'MSC.NASTRAN JOB CREATED ON 10-JUL-00 AT 06:54:00',('<SOL>101</SOL>',
+'TIME 600','CEND','<GLOBALCASE>0</GLOBALCASE>','<SUBCASE>1</SUBCASE>',
+'<SUBCASE>2</SUBCASE>','ENDDATA'),('NASTRAN'));
+#637538824= RESULT_LINEAR_STATIC_ANALYSIS_SUB_STEP(#637538821,#637538825
+,#637538826);
+#637538825= RESULT('Result.0','FemConvert',
+'MSC.NASTRAN JOB CREATED ON 10-JUL-00 AT 06:54:00');
+#637538826= CALCULATED_STATE('Calculated State for Step 2','');
+#637538827= CONTROL_RESULT_RELATIONSHIP(#637538828,#637538824);
+#637538828= CONTROL_LINEAR_STATIC_ANALYSIS_STEP(#637538821,
+'STATIC STEP 2',2,#637538829,'',#637538830);
+#637538829= SPECIFIED_STATE('STEP DEFAULT','default_initial_state');
+#637538830= CONTROL_LINEAR_STATIC_LOAD_INCREMENT_PROCESS('STATIC STEP 2'
+,'',#637538831);
+#637538831= SPECIFIED_STATE('Step 2 Base Specified State',
+'Relating Specified State');
+#637538832= RESULT_LINEAR_STATIC_ANALYSIS_SUB_STEP(#637538821,#637538825
+,#637538833);
+#637538833= CALCULATED_STATE('Calculated State for Step 1','');
+#637538834= CONTROL_RESULT_RELATIONSHIP(#637538835,#637538832);
+#637538835= CONTROL_LINEAR_STATIC_ANALYSIS_STEP(#637538821,
+'STATIC STEP 1',1,#637538829,'',#637538836);
+#637538836= CONTROL_LINEAR_STATIC_LOAD_INCREMENT_PROCESS('STATIC STEP 1'
+,'',#637538837);
+#637538837= SPECIFIED_STATE('Step 1 Base Specified State',
+'Relating Specified State');
+#637538838= SPECIFIED_STATE('SPCCASE_2_2_1','Aggregator SPC 2 Step 1');
+#637538839= STATE_RELATIONSHIP(
+'SPCCASE_2_2_1 is related to Step 1 Base Specified State','',#637538837,
+#637538838);
+#637538840= STATE_RELATIONSHIP(
+'SPCVALSTATE_1_2 is related to SPCCASE_2_2_1','',#637538838,#637538841);
+#637538841= SPECIFIED_STATE('SPCVALSTATE_1_2','');
+#637538842= SINGLE_POINT_CONSTRAINT_ELEMENT_VALUES(#637538841,#637538843
+,#637538852,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)
+,CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538843= SINGLE_POINT_CONSTRAINT_ELEMENT('SPC1_1.0',(#637538835,
+#637538828),#637538253,#637538284,(#637538846,#637538847,#637538848,
+#637538849,#637538850,#637538851),'');
+#637538846= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.X_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538847= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538848= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Z_TRANSLATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538849= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.X_ROTATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538850= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538851= FREEDOM_AND_COEFFICIENT(ENUMERATED_DEGREE_OF_FREEDOM(
+.Z_ROTATION.),CONTEXT_DEPENDENT_MEASURE(1.));
+#637538852= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.X_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(.Z_ROTATION.)));
+#637538855= LINEARLY_SUPERIMPOSED_STATE('LOADSTATECOMBINATION_2',
+'Overall Factor Combined State');
+#637538857= STATE_RELATIONSHIP(
+'LOADSTATECOMBINATION_2 is related to Step 2 Base Specified State','',
+#637538831,#637538855);
+#637538858= STATE_RELATIONSHIP(
+'LOADSTATECOMBINATION_2 is related to Step 1 Base Specified State','',
+#637538837,#637538855);
+#637538859= STATE_COMPONENT('OverallComp','',#637538855,1.);
+#637538861= STATE_RELATIONSHIP(
+'LOADSTATEITEM_4 is related to OverallComp','',#637538859,#637538862);
+#637538862= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_4',
+'Item Factor State');
+#637538863= STATE_RELATIONSHIP(
+'LOADSTATEITEM_3 is related to OverallComp','',#637538859,#637538864);
+#637538864= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_3',
+'Item Factor State');
+#637538865= STATE_RELATIONSHIP(
+'LOADSTATEITEM_1 is related to OverallComp','',#637538859,#637538866);
+#637538866= LINEARLY_SUPERIMPOSED_STATE('LOADSTATEITEM_1',
+'Item Factor State');
+#637538867= SPECIFIED_STATE('LOADSTATECORE_1',
+'Core Loads Specified State');
+#637538868= STATE_RELATIONSHIP(
+'LOADSTATECORE_1 is related to ItemComp_2_1','',#637538869,#637538867);
+#637538869= STATE_COMPONENT('ItemComp_2_1','',#637538866,1.);
+#637538871= NODAL_FREEDOM_ACTION_DEFINITION(#637538867,#637538355,
+#637538284,#637538872,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-1010.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538872= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.)));
+#637538875= SPECIFIED_STATE('LOADSTATECORE_3',
+'Core Loads Specified State');
+#637538876= STATE_RELATIONSHIP(
+'LOADSTATECORE_3 is related to ItemComp_2_3','',#637538877,#637538875);
+#637538877= STATE_COMPONENT('ItemComp_2_3','',#637538864,1.);
+#637538879= NODAL_FREEDOM_ACTION_DEFINITION(#637538875,#637538331,
+#637538284,#637538872,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-10.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538881= SPECIFIED_STATE('LOADSTATECORE_4',
+'Core Loads Specified State');
+#637538882= STATE_RELATIONSHIP(
+'LOADSTATECORE_4 is related to ItemComp_2_4','',#637538883,#637538881);
+#637538883= STATE_COMPONENT('ItemComp_2_4','',#637538862,1.);
+#637538885= NODAL_FREEDOM_ACTION_DEFINITION(#637538881,#637538351,
+#637538284,#637538872,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538887= NODAL_FREEDOM_ACTION_DEFINITION(#637538881,#637538347,
+#637538284,#637538872,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538889= NODAL_FREEDOM_ACTION_DEFINITION(#637538881,#637538343,
+#637538284,#637538872,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538891= NODAL_FREEDOM_ACTION_DEFINITION(#637538881,#637538339,
+#637538284,#637538872,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538893= NODAL_FREEDOM_ACTION_DEFINITION(#637538881,#637538335,
+#637538284,#637538872,(CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(-20.),CONTEXT_DEPENDENT_MEASURE(0.)),
+.APPLIED_LOADS.);
+#637538895= OUTPUT_REQUEST_STATE('Step 1 Output Request State','',(
+#637538835));
+#637538897= NODAL_FREEDOM_VALUES(#637538895,#637538898,#637538284,
+#637538900,(UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.)));
+#637538898= NODE_GROUP('','ALL',#637538282,(#637538253,#637538295,
+#637538299,#637538303,#637538307,#637538311,#637538315,#637538319,
+#637538323,#637538327,#637538331,#637538335,#637538339,#637538343,
+#637538347,#637538351,#637538355));
+#637538900= FREEDOMS_LIST((ENUMERATED_DEGREE_OF_FREEDOM(.X_TRANSLATION.)
+,ENUMERATED_DEGREE_OF_FREEDOM(.Y_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.Z_TRANSLATION.),
+ENUMERATED_DEGREE_OF_FREEDOM(.X_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(
+.Y_ROTATION.),ENUMERATED_DEGREE_OF_FREEDOM(.Z_ROTATION.)));
+#637538903= ID_ATTRIBUTE('ALL',#637538898);
+#637538904= SPECIFIED_STATE('SPCCASE_2_2_2','Aggregator SPC 2 Step 2');
+#637538905= STATE_RELATIONSHIP(
+'SPCCASE_2_2_2 is related to Step 2 Base Specified State','',#637538831,
+#637538904);
+#637538906= OUTPUT_REQUEST_STATE('Step 2 Output Request State','',(
+#637538828));
+#637538908= NODAL_FREEDOM_VALUES(#637538906,#637538898,#637538284,
+#637538900,(UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.),UNSPECIFIED_VALUE(.UNSPECIFIED.),UNSPECIFIED_VALUE(
+.UNSPECIFIED.)));
+#637538910= NODAL_FREEDOM_VALUES(#637538833,#637538253,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538912= NODAL_FREEDOM_VALUES(#637538833,#637538295,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538914= NODAL_FREEDOM_VALUES(#637538833,#637538299,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538916= NODAL_FREEDOM_VALUES(#637538833,#637538303,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538918= NODAL_FREEDOM_VALUES(#637538833,#637538307,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538920= NODAL_FREEDOM_VALUES(#637538833,#637538311,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538922= NODAL_FREEDOM_VALUES(#637538833,#637538315,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538924= NODAL_FREEDOM_VALUES(#637538833,#637538319,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538926= NODAL_FREEDOM_VALUES(#637538833,#637538323,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538928= NODAL_FREEDOM_VALUES(#637538833,#637538327,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538930= NODAL_FREEDOM_VALUES(#637538833,#637538331,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538932= NODAL_FREEDOM_VALUES(#637538833,#637538335,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538934= NODAL_FREEDOM_VALUES(#637538833,#637538339,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538936= NODAL_FREEDOM_VALUES(#637538833,#637538343,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538938= NODAL_FREEDOM_VALUES(#637538833,#637538347,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538940= NODAL_FREEDOM_VALUES(#637538833,#637538351,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538942= NODAL_FREEDOM_VALUES(#637538833,#637538355,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538944= NODAL_FREEDOM_VALUES(#637538826,#637538253,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538946= NODAL_FREEDOM_VALUES(#637538826,#637538295,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538948= NODAL_FREEDOM_VALUES(#637538826,#637538299,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538950= NODAL_FREEDOM_VALUES(#637538826,#637538303,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538952= NODAL_FREEDOM_VALUES(#637538826,#637538307,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538954= NODAL_FREEDOM_VALUES(#637538826,#637538311,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538956= NODAL_FREEDOM_VALUES(#637538826,#637538315,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538958= NODAL_FREEDOM_VALUES(#637538826,#637538319,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538960= NODAL_FREEDOM_VALUES(#637538826,#637538323,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538962= NODAL_FREEDOM_VALUES(#637538826,#637538327,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538964= NODAL_FREEDOM_VALUES(#637538826,#637538331,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538966= NODAL_FREEDOM_VALUES(#637538826,#637538335,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538968= NODAL_FREEDOM_VALUES(#637538826,#637538339,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538970= NODAL_FREEDOM_VALUES(#637538826,#637538343,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538972= NODAL_FREEDOM_VALUES(#637538826,#637538347,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538974= NODAL_FREEDOM_VALUES(#637538826,#637538351,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+#637538976= NODAL_FREEDOM_VALUES(#637538826,#637538355,#637538284,
+#637538900,(CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.),
+CONTEXT_DEPENDENT_MEASURE(0.),CONTEXT_DEPENDENT_MEASURE(0.)));
+ENDSEC;
+
+END-ISO-10303-21;

doc/CMakeLists.txt

@@ -1,7 +1,14 @@
-SET(scl_MANS
-	man/man1/dataprobe.1 
-	man/man1/fedex.1 
-	man/man1/fedex_plus.1 
-	man/man1/mkProbe.1
+SET(sc_MANS
+    man/man1/dataprobe.1
+    man/man1/fedex.1
+    man/man1/fedex_plus.1
+    man/man1/mkProbe.1
 )
-INSTALL(FILES ${scl_MANS} DESTINATION ${MAN_DIR}/man1)
+
+if(NOT DEFINED MAN_DIR)
+  set(MAN_DIR share/man)
+endif(NOT DEFINED MAN_DIR)
+
+IF(NOT WIN32)
+  INSTALL(FILES ${sc_MANS} DESTINATION ${MAN_DIR}/man1)
+ENDIF(NOT WIN32)

doc/Doxyfile

@@ -37,7 +37,7 @@ PROJECT_NUMBER         = 3.2
 # for a project that appears at the top of each page and should give viewer 
 # a quick idea about the purpose of the project. Keep the description short.
 
-PROJECT_BRIEF          = "STEP Class Library"
+PROJECT_BRIEF          = "STEPcode"
 
 # With the PROJECT_LOGO tag one can specify an logo or icon that is 
 # included in the documentation. The maximum height of the logo should not 

doc/doxyassist.xml

@@ -68,7 +68,7 @@
   <qtHelp collectionFile="./doc/helpcollection.qhc"
           projectFile="./doc/helpcollection.qhcp"
           storage="./doc/qch" copyAction="copy">
-    <title>StepClassLibrary</title>
+    <title>STEPcode</title>
     <startPage>qthelp://com.github.mpictor/doc/index.html</startPage>
     <!-- See http://doc.trolltech.com/assistant-custom-help-viewer.html for more
          settings in the <assistant> section. -->
@@ -100,7 +100,7 @@
     -->
     <project>
       <!-- The name of the project -->
-      <name>StepClassLibrary</name>
+      <name>STEPcode</name>
       <!-- The version number of the documentation -->
       <version>0.2</version>
       <!-- Whether to build version specific documentation for the projects or not.

doc/doxygen_custom_header.html

@@ -47,16 +47,16 @@ $mathjax
 <!-- add module list -->
   <div id="navrow0" class="tabs">
     <ul class="tablist">
-        <li><a href="../../doc.StepClassLibrary/doxygen-html/index.html"><span>Main</span></a></li>
-        <li><a href="../../doc.StepClassLibrary.CLDAI/doxygen-html/index.html"><span>CLDAI</span></a></li>
-        <li><a href="../../doc.StepClassLibrary.CLEditor/doxygen-html/index.html"><span>CLEditor</span></a></li>
-        <li><a href="../../doc.StepClassLibrary.CLProbe-ui/doxygen-html/index.html"><span>CLProbe-ui</span></a></li>
-        <li><a href="../../doc.StepClassLibrary.CLStepCore/doxygen-html/index.html"><span>CLStepCore</span></a></li>
-        <li><a href="../../doc.StepClassLibrary.CLUtils/doxygen-html/index.html"><span>CLUtils</span></a></li>
-        <li><a href="../../doc.StepClassLibrary.ExPPP/doxygen-html/index.html"><span>ExPPP</span></a></li>
-        <li><a href="../../doc.StepClassLibrary.Express/doxygen-html/index.html"><span>Express</span></a></li>
-        <li><a href="../../doc.StepClassLibrary.Fedex-Plus/doxygen-html/index.html"><span>Fedex-Plus</span></a></li>
-        <li><a href="../../doc.StepClassLibrary.Tests/doxygen-html/index.html"><span>Tests</span></a></li>
+        <li><a href="../../doc.STEPcode/doxygen-html/index.html"><span>Main</span></a></li>
+        <li><a href="../../doc.STEPcode.CLDAI/doxygen-html/index.html"><span>CLDAI</span></a></li>
+        <li><a href="../../doc.STEPcode.CLEditor/doxygen-html/index.html"><span>CLEditor</span></a></li>
+        <li><a href="../../doc.STEPcode.CLProbe-ui/doxygen-html/index.html"><span>CLProbe-ui</span></a></li>
+        <li><a href="../../doc.STEPcode.CLStepCore/doxygen-html/index.html"><span>CLStepCore</span></a></li>
+        <li><a href="../../doc.STEPcode.CLUtils/doxygen-html/index.html"><span>CLUtils</span></a></li>
+        <li><a href="../../doc.STEPcode.ExPPP/doxygen-html/index.html"><span>ExPPP</span></a></li>
+        <li><a href="../../doc.STEPcode.Express/doxygen-html/index.html"><span>Express</span></a></li>
+        <li><a href="../../doc.STEPcode.Fedex-Plus/doxygen-html/index.html"><span>Fedex-Plus</span></a></li>
+        <li><a href="../../doc.STEPcode.Tests/doxygen-html/index.html"><span>Tests</span></a></li>
     </ul>
   </div>
 <!-- end module list -->

include/CMakeLists.txt

@@ -2,11 +2,8 @@ SET(express_HDRS
   express/alg.h
   express/basic.h
   express/caseitem.h
-  express/de_end.h
-  express/decstart.h
-  express/defstart.h 
-  express/dict.h 
-  express/entity.h 
+  express/dict.h
+  express/entity.h
   express/error.h
   express/expbasic.h
   express/expr.h
@@ -30,7 +27,3 @@ SET(exppp_HDRS
   exppp/exppp.h
 )
 install(FILES ${exppp_HDRS} DESTINATION include/exppp)
-
-SET(SCL_noinst_HEADERS
-  sclprefixes.h 
-)

include/exppp/exppp.h

@@ -1,58 +1,66 @@
-#include <scl_export.h>
+#ifndef EXPPP_H
+#define EXPPP_H
+#include <sc_export.h>
 
-extern SCL_EXPPP_EXPORT int exppp_nesting_indent;    /* default nesting indent */
-extern SCL_EXPPP_EXPORT int exppp_continuation_indent;   /* default nesting indent for */
+extern SC_EXPPP_EXPORT int exppp_nesting_indent;    /* default nesting indent */
+extern SC_EXPPP_EXPORT int exppp_continuation_indent;   /* default nesting indent for */
 /* continuation lines */
-extern SCL_EXPPP_EXPORT int exppp_linelength;        /* leave some slop for closing */
+extern SC_EXPPP_EXPORT int exppp_linelength;        /* leave some slop for closing */
 /* parens.  \n is not included in */
 /* this count either */
-extern SCL_EXPPP_EXPORT bool exppp_rmpp;          /* if true, create rmpp */
-extern SCL_EXPPP_EXPORT bool exppp_alphabetize;       /* if true, alphabetize */
-extern SCL_EXPPP_EXPORT bool exppp_terse;         /* don't describe action to stdout */
-extern SCL_EXPPP_EXPORT bool exppp_reference_info;    /* if true, add commentary */
+extern SC_EXPPP_EXPORT bool exppp_rmpp;          /* if true, create rmpp */
+extern SC_EXPPP_EXPORT bool exppp_alphabetize;       /* if true, alphabetize */
+extern SC_EXPPP_EXPORT bool exppp_terse;         /* don't describe action to stdout */
+extern SC_EXPPP_EXPORT bool exppp_reference_info;    /* if true, add commentary */
 /* about where things came from */
-extern SCL_EXPPP_EXPORT bool exppp_preserve_comments; /* if true, preserve comments where */
+extern SC_EXPPP_EXPORT bool exppp_preserve_comments; /* if true, preserve comments where */
 /* possible */
-extern SCL_EXPPP_EXPORT char * exppp_output_filename; /* force output filename */
+extern SC_EXPPP_EXPORT char * exppp_output_filename; /* force output filename */
+extern SC_EXPPP_EXPORT bool exppp_output_filename_reset; /* if true, force output filename */
 
-SCL_EXPPP_EXPORT void EXPRESSout( Express e );
+SC_EXPPP_EXPORT void EXPRESSout( Express e );
 
-SCL_EXPPP_EXPORT void ENTITYout( Entity e );
-SCL_EXPPP_EXPORT void EXPRout( Expression expr );
-SCL_EXPPP_EXPORT void FUNCout( Function f );
-SCL_EXPPP_EXPORT void PROCout( Procedure p );
-SCL_EXPPP_EXPORT void RULEout( Rule r );
-SCL_EXPPP_EXPORT char * SCHEMAout( Schema s );
-SCL_EXPPP_EXPORT void SCHEMAref_out( Schema s );
-SCL_EXPPP_EXPORT void STMTout( Statement s );
-SCL_EXPPP_EXPORT void TYPEout( Type t );
-SCL_EXPPP_EXPORT void TYPEhead_out( Type t );
-SCL_EXPPP_EXPORT void TYPEbody_out( Type t );
-SCL_EXPPP_EXPORT void WHEREout( Linked_List w );
+SC_EXPPP_EXPORT void ENTITYout( Entity e );
+SC_EXPPP_EXPORT void EXPRout( Expression expr );
+SC_EXPPP_EXPORT void FUNCout( Function f );
+SC_EXPPP_EXPORT void PROCout( Procedure p );
+SC_EXPPP_EXPORT void RULEout( Rule r );
+SC_EXPPP_EXPORT char * SCHEMAout( Schema s );
+SC_EXPPP_EXPORT void SCHEMAref_out( Schema s );
+SC_EXPPP_EXPORT void STMTout( Statement s );
+SC_EXPPP_EXPORT void TYPEout( Type t );
+SC_EXPPP_EXPORT void TYPEhead_out( Type t );
+SC_EXPPP_EXPORT void TYPEbody_out( Type t );
+SC_EXPPP_EXPORT void WHEREout( Linked_List w );
 
-SCL_EXPPP_EXPORT char * REFto_string( Dictionary refdict, Linked_List reflist, char * type, int level );
-SCL_EXPPP_EXPORT char * ENTITYto_string( Entity e );
-SCL_EXPPP_EXPORT char * SUBTYPEto_string( Expression e );
-SCL_EXPPP_EXPORT char * EXPRto_string( Expression expr );
-SCL_EXPPP_EXPORT char * FUNCto_string( Function f );
-SCL_EXPPP_EXPORT char * PROCto_string( Procedure p );
-SCL_EXPPP_EXPORT char * RULEto_string( Rule r );
-SCL_EXPPP_EXPORT char * SCHEMAref_to_string( Schema s );
-SCL_EXPPP_EXPORT char * STMTto_string( Statement s );
-SCL_EXPPP_EXPORT char * TYPEto_string( Type t );
-SCL_EXPPP_EXPORT char * TYPEhead_to_string( Type t );
-SCL_EXPPP_EXPORT char * TYPEbody_to_string( Type t );
-SCL_EXPPP_EXPORT char * WHEREto_string( Linked_List w );
+SC_EXPPP_EXPORT char * REFto_string( Dictionary refdict, Linked_List reflist, char * type, int level );
+SC_EXPPP_EXPORT char * ENTITYto_string( Entity e );
+SC_EXPPP_EXPORT char * SUBTYPEto_string( Expression e );
+SC_EXPPP_EXPORT char * EXPRto_string( Expression expr );
+SC_EXPPP_EXPORT char * FUNCto_string( Function f );
+SC_EXPPP_EXPORT char * PROCto_string( Procedure p );
+SC_EXPPP_EXPORT char * RULEto_string( Rule r );
+SC_EXPPP_EXPORT char * SCHEMAref_to_string( Schema s );
+SC_EXPPP_EXPORT char * STMTto_string( Statement s );
+SC_EXPPP_EXPORT char * TYPEto_string( Type t );
+SC_EXPPP_EXPORT char * TYPEhead_to_string( Type t );
+SC_EXPPP_EXPORT char * TYPEbody_to_string( Type t );
+SC_EXPPP_EXPORT char * WHEREto_string( Linked_List w );
 
-SCL_EXPPP_EXPORT int REFto_buffer( Dictionary refdict, Linked_List reflist, char * type, int level, char * buffer, int length );
-SCL_EXPPP_EXPORT int ENTITYto_buffer( Entity e, char * buffer, int length );
-SCL_EXPPP_EXPORT int EXPRto_buffer( Expression e, char * buffer, int length );
-SCL_EXPPP_EXPORT int FUNCto_buffer( Function e, char * buffer, int length );
-SCL_EXPPP_EXPORT int PROCto_buffer( Procedure e, char * buffer, int length );
-SCL_EXPPP_EXPORT int RULEto_buffer( Rule e, char * buffer, int length );
-SCL_EXPPP_EXPORT int SCHEMAref_to_buffer( Schema s, char * buffer, int length );
-SCL_EXPPP_EXPORT int STMTto_buffer( Statement s, char * buffer, int length );
-SCL_EXPPP_EXPORT int TYPEto_buffer( Type t, char * buffer, int length );
-SCL_EXPPP_EXPORT int TYPEhead_to_buffer( Type t, char * buffer, int length );
-SCL_EXPPP_EXPORT int TYPEbody_to_buffer( Type t, char * buffer, int length );
-SCL_EXPPP_EXPORT int WHEREto_buffer( Linked_List w, char * buffer, int length );
+SC_EXPPP_EXPORT int REFto_buffer( Dictionary refdict, Linked_List reflist, char * type, int level, char * buffer, int length );
+SC_EXPPP_EXPORT int ENTITYto_buffer( Entity e, char * buffer, int length );
+SC_EXPPP_EXPORT int EXPRto_buffer( Expression e, char * buffer, int length );
+SC_EXPPP_EXPORT int FUNCto_buffer( Function e, char * buffer, int length );
+SC_EXPPP_EXPORT int PROCto_buffer( Procedure e, char * buffer, int length );
+SC_EXPPP_EXPORT int RULEto_buffer( Rule e, char * buffer, int length );
+SC_EXPPP_EXPORT int SCHEMAref_to_buffer( Schema s, char * buffer, int length );
+SC_EXPPP_EXPORT int STMTto_buffer( Statement s, char * buffer, int length );
+SC_EXPPP_EXPORT int TYPEto_buffer( Type t, char * buffer, int length );
+SC_EXPPP_EXPORT int TYPEhead_to_buffer( Type t, char * buffer, int length );
+SC_EXPPP_EXPORT int TYPEbody_to_buffer( Type t, char * buffer, int length );
+SC_EXPPP_EXPORT int WHEREto_buffer( Linked_List w, char * buffer, int length );
+
+SC_EXPPP_EXPORT int EXPRlength( Expression e );
+SC_EXPPP_EXPORT int count_newlines( char * s );
+
+#endif

include/express/alg.h

@@ -37,10 +37,6 @@
  *
  */
 
-/*************/
-/* constants */
-/*************/
-
 /*****************/
 /* packages used */
 /*****************/
@@ -59,10 +55,6 @@ typedef struct Scope_ * Function;
 typedef struct Scope_ * Rule;
 typedef struct Where_ * Where;
 
-/****************/
-/* modules used */
-/****************/
-
 /***************************/
 /* hidden type definitions */
 /***************************/
@@ -117,19 +109,11 @@ struct Where_ {
 /* global variables */
 /********************/
 
-#ifdef ALGORITHM_C
-#include "defstart.h"
-#else
-#include "decstart.h"
-#endif /* ALGORITHM_C */
-
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head ALG_fl;
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head FUNC_fl;
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head RULE_fl;
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head PROC_fl;
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head WHERE_fl;
-
-#include "de_end.h"
+extern SC_EXPRESS_EXPORT struct freelist_head ALG_fl;
+extern SC_EXPRESS_EXPORT struct freelist_head FUNC_fl;
+extern SC_EXPRESS_EXPORT struct freelist_head RULE_fl;
+extern SC_EXPRESS_EXPORT struct freelist_head PROC_fl;
+extern SC_EXPRESS_EXPORT struct freelist_head WHERE_fl;
 
 /******************************/
 /* macro function definitions */
@@ -177,9 +161,8 @@ GLOBAL SCL_EXPRESS_EXPORT struct freelist_head WHERE_fl;
 /* function prototypes */
 /***********************/
 
-extern SCL_EXPRESS_EXPORT Scope    ALGcreate PROTO( ( char ) );
-extern SCL_EXPRESS_EXPORT void     ALGinitialize PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT void     ALGput_full_text PROTO( ( Scope, int, int ) );
-
+extern SC_EXPRESS_EXPORT Scope    ALGcreate PROTO( ( char ) );
+extern SC_EXPRESS_EXPORT void     ALGinitialize PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void     ALGput_full_text PROTO( ( Scope, int, int ) );
 
 #endif /* ALGORITHM_H */

include/express/basic.h

@@ -71,8 +71,8 @@
  *
  */
 
-#include <scl_cf.h>
-#include <scl_export.h>
+#include <sc_cf.h>
+#include <sc_export.h>
 #include <stdio.h>
 
 /******************************/
@@ -82,7 +82,7 @@
 #ifdef HAVE_STDBOOL_H
 # include <stdbool.h>
 #else
-# include <scl_stdbool.h>
+# include <sc_stdbool.h>
 #endif
 
 /************************/

include/express/caseitem.h

@@ -70,15 +70,7 @@ struct Case_Item_ {
 /* global variables */
 /********************/
 
-#ifdef CASE_ITEM_C
-#include "defstart.h"
-#else
-#include "decstart.h"
-#endif /*CASE_ITEM_C*/
-
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head CASE_IT_fl;
-
-#include "de_end.h"
+extern SC_EXPRESS_EXPORT struct freelist_head CASE_IT_fl;
 
 /******************************/
 /* macro function definitions */
@@ -94,7 +86,7 @@ GLOBAL SCL_EXPRESS_EXPORT struct freelist_head CASE_IT_fl;
 #define CASE_IT_new()       (struct Case_Item_ *)MEM_new(&CASE_IT_fl)
 #define CASE_IT_destroy(x)  MEM_destroy(&CASE_IT_fl,(Freelist *)(Generic)x)
 
-extern SCL_EXPRESS_EXPORT Case_Item    CASE_ITcreate PROTO( ( Linked_List, struct Statement_ * ) );
-extern SCL_EXPRESS_EXPORT void     CASE_ITinitialize PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT Case_Item    CASE_ITcreate PROTO( ( Linked_List, struct Statement_ * ) );
+extern SC_EXPRESS_EXPORT void     CASE_ITinitialize PROTO( ( void ) );
 
 #endif /*CASE_ITEM_H*/

include/express/dict.h

@@ -72,15 +72,7 @@ typedef HashEntry       DictionaryEntry;
 /* global variables */
 /********************/
 
-#ifdef DICTIONARY_C
-#include "defstart.h"
-#else
-#include "decstart.h"
-#endif /*DICTIONARY_C*/
-
-GLOBAL SCL_EXPRESS_EXPORT char DICT_type;  /**< set as a side-effect of DICT lookup routines to type of object found */
-
-#include "de_end.h"
+extern SC_EXPRESS_EXPORT char DICT_type;  /**< set as a side-effect of DICT lookup routines to type of object found */
 
 /*******************************/
 /* macro function definitions */
@@ -105,13 +97,14 @@ GLOBAL SCL_EXPRESS_EXPORT char DICT_type;  /**< set as a side-effect of DICT loo
 /* function prototypes */
 /***********************/
 
-extern SCL_EXPRESS_EXPORT void     DICTinitialize PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT int      DICTdefine PROTO( ( Dictionary, char *, Generic, Symbol *, char ) );
-extern SCL_EXPRESS_EXPORT int      DICT_define PROTO( ( Dictionary, char *, Generic, Symbol *, char ) );
-extern SCL_EXPRESS_EXPORT void     DICTundefine PROTO( ( Dictionary, char * ) );
-extern SCL_EXPRESS_EXPORT Generic      DICTlookup PROTO( ( Dictionary, char * ) );
-extern SCL_EXPRESS_EXPORT Generic      DICTlookup_symbol PROTO( ( Dictionary, char *, Symbol ** ) );
-extern SCL_EXPRESS_EXPORT Generic      DICTdo PROTO( ( DictionaryEntry * ) );
-extern SCL_EXPRESS_EXPORT void     DICTprint PROTO( ( Dictionary ) );
+extern SC_EXPRESS_EXPORT void     DICTinitialize PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void     DICTcleanup PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT int      DICTdefine PROTO( ( Dictionary, char *, Generic, Symbol *, char ) );
+extern SC_EXPRESS_EXPORT int      DICT_define PROTO( ( Dictionary, char *, Generic, Symbol *, char ) );
+extern SC_EXPRESS_EXPORT void     DICTundefine PROTO( ( Dictionary, char * ) );
+extern SC_EXPRESS_EXPORT Generic      DICTlookup PROTO( ( Dictionary, char * ) );
+extern SC_EXPRESS_EXPORT Generic      DICTlookup_symbol PROTO( ( Dictionary, char *, Symbol ** ) );
+extern SC_EXPRESS_EXPORT Generic      DICTdo PROTO( ( DictionaryEntry * ) );
+extern SC_EXPRESS_EXPORT void     DICTprint PROTO( ( Dictionary ) );
 
 #endif /*DICTIONARY_H*/

include/express/entity.h

@@ -60,7 +60,7 @@
 /* packages used */
 /*****************/
 
-#include <scl_export.h>
+#include <sc_export.h>
 #include "expbasic.h"   /* get basic definitions */
 #include "symbol.h"
 #include "scope.h"
@@ -102,17 +102,8 @@ struct Entity_ {
 /* global variables */
 /********************/
 
-#ifdef ENTITY_C
-#include "defstart.h"
-#else
-#include "decstart.h"
-#endif    /*  ENTITY_C  */
-
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head ENTITY_fl;
-
-GLOBAL SCL_EXPRESS_EXPORT int  ENTITY_MARK INITIALLY( 0 );
-
-#include "de_end.h"
+extern SC_EXPRESS_EXPORT struct freelist_head ENTITY_fl;
+extern SC_EXPRESS_EXPORT int ENTITY_MARK;
 
 /******************************/
 /* macro function definitions */
@@ -149,19 +140,19 @@ GLOBAL SCL_EXPRESS_EXPORT int  ENTITY_MARK INITIALLY( 0 );
 /* function prototypes */
 /***********************/
 
-extern SCL_EXPRESS_EXPORT struct Scope_  * ENTITYcreate PROTO( ( struct Symbol_ * ) );
-extern SCL_EXPRESS_EXPORT void     ENTITYinitialize PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT void     ENTITYadd_attribute PROTO( ( struct Scope_ *, struct Variable_ * ) );
-extern SCL_EXPRESS_EXPORT struct Scope_  * ENTITYcopy PROTO( ( struct Scope_ * ) );
-extern SCL_EXPRESS_EXPORT Entity       ENTITYfind_inherited_entity PROTO( ( struct Scope_ *, char *, int ) );
-extern SCL_EXPRESS_EXPORT Variable     ENTITYfind_inherited_attribute PROTO( ( struct Scope_ *, char *, struct Symbol_ ** ) );
-extern SCL_EXPRESS_EXPORT Variable     ENTITYresolve_attr_ref PROTO( ( Entity, Symbol *, Symbol * ) );
-extern SCL_EXPRESS_EXPORT bool      ENTITYhas_immediate_supertype PROTO( ( Entity, Entity ) );
-extern SCL_EXPRESS_EXPORT Variable     ENTITYget_named_attribute PROTO( ( Entity, char * ) );
-extern SCL_EXPRESS_EXPORT Linked_List  ENTITYget_all_attributes PROTO( ( Entity ) );
-extern SCL_EXPRESS_EXPORT bool      ENTITYhas_supertype PROTO( ( Entity, Entity ) );
-extern SCL_EXPRESS_EXPORT void     ENTITYadd_instance PROTO( ( Entity, Generic ) );
-extern SCL_EXPRESS_EXPORT int      ENTITYget_initial_offset PROTO( ( Entity ) );
-extern SCL_EXPRESS_EXPORT bool      ENTITYdeclares_variable PROTO( ( Entity, struct Variable_ * ) );
+extern SC_EXPRESS_EXPORT struct Scope_  * ENTITYcreate PROTO( ( struct Symbol_ * ) );
+extern SC_EXPRESS_EXPORT void     ENTITYinitialize PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void     ENTITYadd_attribute PROTO( ( struct Scope_ *, struct Variable_ * ) );
+extern SC_EXPRESS_EXPORT struct Scope_  * ENTITYcopy PROTO( ( struct Scope_ * ) );
+extern SC_EXPRESS_EXPORT Entity       ENTITYfind_inherited_entity PROTO( ( struct Scope_ *, char *, int ) );
+extern SC_EXPRESS_EXPORT Variable     ENTITYfind_inherited_attribute PROTO( ( struct Scope_ *, char *, struct Symbol_ ** ) );
+extern SC_EXPRESS_EXPORT Variable     ENTITYresolve_attr_ref PROTO( ( Entity, Symbol *, Symbol * ) );
+extern SC_EXPRESS_EXPORT bool      ENTITYhas_immediate_supertype PROTO( ( Entity, Entity ) );
+extern SC_EXPRESS_EXPORT Variable     ENTITYget_named_attribute PROTO( ( Entity, char * ) );
+extern SC_EXPRESS_EXPORT Linked_List  ENTITYget_all_attributes PROTO( ( Entity ) );
+extern SC_EXPRESS_EXPORT bool      ENTITYhas_supertype PROTO( ( Entity, Entity ) );
+extern SC_EXPRESS_EXPORT void     ENTITYadd_instance PROTO( ( Entity, Generic ) );
+extern SC_EXPRESS_EXPORT int      ENTITYget_initial_offset PROTO( ( Entity ) );
+extern SC_EXPRESS_EXPORT int      ENTITYdeclares_variable PROTO( ( Entity, struct Variable_ * ) );
 
 #endif    /*  ENTITY_H  */

include/express/error.h

@@ -28,7 +28,7 @@
  * prettied up interface to print_objects_when_running
  */
 
-#include <scl_export.h>
+#include <sc_export.h>
 #include "basic.h"  /* get basic definitions */
 #include <setjmp.h>
 
@@ -81,37 +81,29 @@ typedef struct Error_Warning_ {
 /* global variables */
 /********************/
 
-#ifdef ERROR_C
-#include "defstart.h"
-#else
-#include "decstart.h"
-#endif /* ERROR_C */
-
-GLOBAL SCL_EXPRESS_EXPORT bool  __ERROR_buffer_errors       INITIALLY( false );
-GLOBAL SCL_EXPRESS_EXPORT char * current_filename           INITIALLY( "stdin" );
+extern SC_EXPRESS_EXPORT bool __ERROR_buffer_errors;
+extern SC_EXPRESS_EXPORT char * current_filename;
 
 /* flag to remember whether non-warning errors have occurred */
-GLOBAL SCL_EXPRESS_EXPORT bool  ERRORoccurred           INITIALLY( false );
+extern SC_EXPRESS_EXPORT bool ERRORoccurred;
 
 
-GLOBAL SCL_EXPRESS_EXPORT Error    experrc             INITIALLY( ERROR_none );
-GLOBAL SCL_EXPRESS_EXPORT Error    ERROR_subordinate_failed    INITIALLY( ERROR_none );
-GLOBAL SCL_EXPRESS_EXPORT Error    ERROR_syntax_expecting      INITIALLY( ERROR_none );
+extern SC_EXPRESS_EXPORT Error experrc;
+extern SC_EXPRESS_EXPORT Error ERROR_subordinate_failed;
+extern SC_EXPRESS_EXPORT Error ERROR_syntax_expecting;
 
 /* all of these are 1 if true, 0 if false switches */
 /* for debugging fedex */
-GLOBAL SCL_EXPRESS_EXPORT int  ERRORdebugging          INITIALLY( 0 );
+extern SC_EXPRESS_EXPORT int ERRORdebugging;
 /* for debugging malloc during resolution */
-GLOBAL SCL_EXPRESS_EXPORT int  malloc_debug_resolve        INITIALLY( 0 );
+extern SC_EXPRESS_EXPORT int malloc_debug_resolve;
 /* for debugging yacc/lex */
-GLOBAL SCL_EXPRESS_EXPORT int  debug               INITIALLY( 0 );
+extern SC_EXPRESS_EXPORT int debug;
 
-GLOBAL SCL_EXPRESS_EXPORT struct Linked_List_ * ERRORwarnings;
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head ERROR_OPT_fl;
+extern SC_EXPRESS_EXPORT struct Linked_List_ * ERRORwarnings;
+extern SC_EXPRESS_EXPORT struct freelist_head ERROR_OPT_fl;
 
-GLOBAL SCL_EXPRESS_EXPORT void ( *ERRORusage_function ) PROTO( ( void ) );
-
-#include "de_end.h"
+extern SC_EXPRESS_EXPORT void ( *ERRORusage_function )( void );
 
 /******************************/
 /* macro function definitions */
@@ -125,16 +117,14 @@ GLOBAL SCL_EXPRESS_EXPORT void ( *ERRORusage_function ) PROTO( ( void ) );
 /***********************/
 
 #if defined(__MSVC__) || defined(__BORLAND__)
-extern SCL_EXPRESS_EXPORT void ERROR_start_message_buffer PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT void ERROR_flush_message_buffer PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void ERROR_start_message_buffer PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void ERROR_flush_message_buffer PROTO( ( void ) );
 #endif
 
 /********************/
 /* Inline functions */
 /********************/
 
-#if supports_inline_functions || defined(ERROR_C)
-
 static_inline void ERRORdisable( Error error ) {
     if( error != ERROR_none ) {
         error->enabled = false;
@@ -176,36 +166,32 @@ static_inline void ERRORflush_messages( void ) {
     }
 }
 
-#endif /*supports_inline_functions || defined(ERROR_C)*/
-
 /***********************/
 /* function prototypes */
 /***********************/
 
-extern SCL_EXPRESS_EXPORT void ERRORinitialize PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT void ERRORinitialize_after_LIST PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT void ERRORnospace PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT void ERRORabort PROTO( ( int ) );
-extern SCL_EXPRESS_EXPORT Error    ERRORcreate PROTO( ( char *, Severity ) );
-extern SCL_EXPRESS_EXPORT void ERRORreport PROTO( ( Error, ... ) );
+extern SC_EXPRESS_EXPORT void ERRORinitialize PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void ERRORinitialize_after_LIST PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void ERRORcleanup PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void ERRORnospace PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void ERRORabort PROTO( ( int ) );
+extern SC_EXPRESS_EXPORT Error    ERRORcreate PROTO( ( char *, Severity ) );
+extern SC_EXPRESS_EXPORT void ERRORreport PROTO( ( Error, ... ) );
+extern SC_EXPRESS_EXPORT void ERRORdestroy PROTO( ( Error ) );
 
 struct Symbol_; /* mention Symbol to avoid warning on following line */
-extern SCL_EXPRESS_EXPORT void ERRORreport_with_symbol PROTO( ( Error, struct Symbol_ *, ... ) );
-extern SCL_EXPRESS_EXPORT void ERRORreport_with_line PROTO( ( Error, int, ... ) );
-#if !supports_inline_functions
-extern SCL_EXPRESS_EXPORT void ERRORbuffer_messages PROTO( ( bool ) );
-extern SCL_EXPRESS_EXPORT void ERRORflush_messages PROTO( ( void ) );
-#endif
+extern SC_EXPRESS_EXPORT void ERRORreport_with_symbol PROTO( ( Error, struct Symbol_ *, ... ) );
+extern SC_EXPRESS_EXPORT void ERRORreport_with_line PROTO( ( Error, int, ... ) );
 
 #if !defined(__MSVC__) && !defined(__BORLAND__)
-extern SCL_EXPRESS_EXPORT void ERROR_start_message_buffer PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT void ERROR_flush_message_buffer PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void ERROR_start_message_buffer PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void ERROR_flush_message_buffer PROTO( ( void ) );
 #endif
 
-extern SCL_EXPRESS_EXPORT void ERRORcreate_warning PROTO( ( char *, Error ) );
-extern SCL_EXPRESS_EXPORT void ERRORset_warning PROTO( ( char *, int ) );
-extern SCL_EXPRESS_EXPORT void ERRORset_all_warnings PROTO( ( int ) );
-extern SCL_EXPRESS_EXPORT void ERRORsafe PROTO( ( jmp_buf env ) );
-extern SCL_EXPRESS_EXPORT void ERRORunsafe PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void ERRORcreate_warning PROTO( ( char *, Error ) );
+extern SC_EXPRESS_EXPORT void ERRORset_warning PROTO( ( char *, int ) );
+extern SC_EXPRESS_EXPORT void ERRORset_all_warnings PROTO( ( int ) );
+extern SC_EXPRESS_EXPORT void ERRORsafe PROTO( ( jmp_buf env ) );
+extern SC_EXPRESS_EXPORT void ERRORunsafe PROTO( ( void ) );
 
 #endif /* ERROR_H */

include/express/expbasic.h

@@ -1,4 +1,3 @@
-
 /*
  * This software was developed by U.S. Government employees as part of
  * their official duties and is not subject to copyright.
@@ -127,8 +126,8 @@ typedef char * Binary;
 #define OBJ_EXPRESSION  'x' /**< so far only enums get looked up by name & */
 #define OBJ_ENUM    'x'     /**< appear this way, perhaps they should be variables? */
 #define OBJ_AMBIG_ENUM  'z' /**< enumerations of the same name which are
-                             * visible in the same scope when qualified
-                             * z is of no mnemonic significance (so far) */
+* visible in the same scope when qualified
+* z is of no mnemonic significance (so far) */
 #define IS_ENUM(x)  (((x) == OBJ_ENUM) || ((x) == OBJ_AMBIG_ENUM))
 
 /** these represent a different way of selecting classes of objects

include/express/expr.h

@@ -1,7 +1,7 @@
 #ifndef EXPRESSION_H
 #define EXPRESSION_H
 
-/** **********************************************************************
+/*********************************************************************//**
 ** Module:  Expression \file expr.h
 ** Description: This module implements the Expression abstraction.
 **  Several types of expressions are supported: identifiers,
@@ -60,7 +60,7 @@
 /* packages used */
 /*****************/
 
-#include <scl_export.h>
+#include <sc_export.h>
 #include <math.h>
 #include "expbasic.h"   /* get basic definitions */
 
@@ -185,31 +185,23 @@ struct EXPop_entry {
 /* global variables */
 /********************/
 
-#ifdef EXPRESSION_C
-#include "defstart.h"
-#else
-#include "decstart.h"
-#endif /*EXPRESSION_C*/
+extern SC_EXPRESS_EXPORT struct EXPop_entry EXPop_table[OP_LAST];
 
-GLOBAL SCL_EXPRESS_EXPORT struct EXPop_entry EXPop_table[OP_LAST];
+extern SC_EXPRESS_EXPORT Expression  LITERAL_E;
+extern SC_EXPRESS_EXPORT Expression  LITERAL_INFINITY;
+extern SC_EXPRESS_EXPORT Expression  LITERAL_PI;
+extern SC_EXPRESS_EXPORT Expression  LITERAL_ZERO;
+extern SC_EXPRESS_EXPORT Expression  LITERAL_ONE;
 
-GLOBAL SCL_EXPRESS_EXPORT Expression   LITERAL_E       INITIALLY( EXPRESSION_NULL );
-GLOBAL SCL_EXPRESS_EXPORT Expression   LITERAL_INFINITY    INITIALLY( EXPRESSION_NULL );
-GLOBAL SCL_EXPRESS_EXPORT Expression   LITERAL_PI      INITIALLY( EXPRESSION_NULL );
-GLOBAL SCL_EXPRESS_EXPORT Expression   LITERAL_ZERO        INITIALLY( EXPRESSION_NULL );
-GLOBAL SCL_EXPRESS_EXPORT Expression   LITERAL_ONE;
+extern SC_EXPRESS_EXPORT Error ERROR_bad_qualification;
+extern SC_EXPRESS_EXPORT Error ERROR_integer_expression_expected;
+extern SC_EXPRESS_EXPORT Error ERROR_implicit_downcast;
+extern SC_EXPRESS_EXPORT Error ERROR_ambig_implicit_downcast;
 
-GLOBAL SCL_EXPRESS_EXPORT Error    ERROR_bad_qualification         INITIALLY( ERROR_none );
-GLOBAL SCL_EXPRESS_EXPORT Error    ERROR_integer_expression_expected   INITIALLY( ERROR_none );
-GLOBAL SCL_EXPRESS_EXPORT Error    ERROR_implicit_downcast         INITIALLY( ERROR_none );
-GLOBAL SCL_EXPRESS_EXPORT Error    ERROR_ambig_implicit_downcast       INITIALLY( ERROR_none );
-
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head EXP_fl;
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head OP_fl;
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head QUERY_fl;
-GLOBAL SCL_EXPRESS_EXPORT struct freelist_head QUAL_ATTR_fl;
-
-#include "de_end.h"
+extern SC_EXPRESS_EXPORT struct freelist_head EXP_fl;
+extern SC_EXPRESS_EXPORT struct freelist_head OP_fl;
+extern SC_EXPRESS_EXPORT struct freelist_head QUERY_fl;
+extern SC_EXPRESS_EXPORT struct freelist_head QUAL_ATTR_fl;
 
 /******************************/
 /* macro function definitions */
@@ -262,35 +254,16 @@ GLOBAL SCL_EXPRESS_EXPORT struct freelist_head QUAL_ATTR_fl;
 /* function prototypes */
 /***********************/
 
-extern SCL_EXPRESS_EXPORT Expression   EXPcreate PROTO( ( Type ) );
-extern SCL_EXPRESS_EXPORT Expression   EXPcreate_simple PROTO( ( Type ) );
-extern SCL_EXPRESS_EXPORT Expression   EXPcreate_from_symbol PROTO( ( Type, Symbol * ) );
-extern SCL_EXPRESS_EXPORT Expression   UN_EXPcreate PROTO( ( Op_Code, Expression ) );
-extern SCL_EXPRESS_EXPORT Expression   BIN_EXPcreate PROTO( ( Op_Code, Expression, Expression ) );
-extern SCL_EXPRESS_EXPORT Expression   TERN_EXPcreate PROTO( ( Op_Code, Expression, Expression, Expression ) );
-extern SCL_EXPRESS_EXPORT Expression   QUERYcreate PROTO( ( Symbol *, Expression ) );
-extern SCL_EXPRESS_EXPORT void     EXPinitialize PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT Type     EXPtype PROTO( ( Expression, struct Scope_ * ) );
-extern SCL_EXPRESS_EXPORT int      EXPget_integer_value PROTO( ( Expression ) );
-
-/********************/
-/* inline functions */
-/********************/
-
-#if supports_inline_functions || defined(EXPRESSION_C)
-
-static_inline
-int
-OPget_number_of_operands( Op_Code op ) {
-    if( ( op == OP_NEGATE ) || ( op == OP_NOT ) ) {
-        return 1;
-    } else if( op == OP_SUBCOMPONENT ) {
-        return 3;
-    } else {
-        return 2;
-    }
-}
-
-#endif /* supports_inline_functions || defined(EXPRESSION_C) */
+extern SC_EXPRESS_EXPORT Expression   EXPcreate PROTO( ( Type ) );
+extern SC_EXPRESS_EXPORT Expression   EXPcreate_simple PROTO( ( Type ) );
+extern SC_EXPRESS_EXPORT Expression   EXPcreate_from_symbol PROTO( ( Type, Symbol * ) );
+extern SC_EXPRESS_EXPORT Expression   UN_EXPcreate PROTO( ( Op_Code, Expression ) );
+extern SC_EXPRESS_EXPORT Expression   BIN_EXPcreate PROTO( ( Op_Code, Expression, Expression ) );
+extern SC_EXPRESS_EXPORT Expression   TERN_EXPcreate PROTO( ( Op_Code, Expression, Expression, Expression ) );
+extern SC_EXPRESS_EXPORT Expression   QUERYcreate PROTO( ( Symbol *, Expression ) );
+extern SC_EXPRESS_EXPORT void     EXPinitialize PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void     EXPcleanup PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT Type     EXPtype PROTO( ( Expression, struct Scope_ * ) );
+extern SC_EXPRESS_EXPORT int      EXPget_integer_value PROTO( ( Expression ) );
 
 #endif /*EXPRESSION_H*/

include/express/express.h

@@ -88,169 +88,151 @@ struct Express_ {
 /* global variables */
 /********************/
 
-#ifdef EXPRESS_C
-# define GLOBAL
-# define INITIALLY(value) = value
-#else
-# define GLOBAL extern
-# define INITIALLY(value)
-#endif /*EXPRESS_C*/
+extern SC_EXPRESS_EXPORT Linked_List EXPRESS_path;
+extern SC_EXPRESS_EXPORT int EXPRESSpass;
 
-#ifdef YYDEBUG
-extern SCL_EXPRESS_EXPORT int yydebug;
-extern SCL_EXPRESS_EXPORT int yydbg_upper_limit;
-extern SCL_EXPRESS_EXPORT int yydbg_lower_limit;
-extern SCL_EXPRESS_EXPORT int yydbg_verbose;
-#endif
+extern SC_EXPRESS_EXPORT void ( *EXPRESSinit_args ) PROTO( ( int, char ** ) );
+extern SC_EXPRESS_EXPORT void ( *EXPRESSinit_parse ) PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT int ( *EXPRESSfail ) PROTO( ( Express ) );
+extern SC_EXPRESS_EXPORT int ( *EXPRESSsucceed ) PROTO( ( Express ) );
+extern SC_EXPRESS_EXPORT void ( *EXPRESSbackend ) PROTO( ( Express ) );
+extern SC_EXPRESS_EXPORT char * EXPRESSprogram_name;
+extern char   EXPRESSgetopt_options[];  /* initialized elsewhere */
+extern SC_EXPRESS_EXPORT int ( *EXPRESSgetopt ) PROTO( ( int, char * ) );
+extern SC_EXPRESS_EXPORT bool    EXPRESSignore_duplicate_schemas;
 
-GLOBAL SCL_EXPRESS_EXPORT Linked_List EXPRESS_path;
-GLOBAL SCL_EXPRESS_EXPORT int EXPRESSpass;
+extern SC_EXPRESS_EXPORT Dictionary EXPRESSbuiltins;  /* procedures/functions */
 
-GLOBAL SCL_EXPRESS_EXPORT void ( *EXPRESSinit_args ) PROTO( ( int, char ** ) )    INITIALLY( 0 );
-GLOBAL SCL_EXPRESS_EXPORT void ( *EXPRESSinit_parse ) PROTO( ( void ) )      INITIALLY( 0 );
-GLOBAL SCL_EXPRESS_EXPORT int ( *EXPRESSfail ) PROTO( ( Express ) )     INITIALLY( 0 );
-GLOBAL SCL_EXPRESS_EXPORT int ( *EXPRESSsucceed ) PROTO( ( Express ) )      INITIALLY( 0 );
-GLOBAL SCL_EXPRESS_EXPORT void ( *EXPRESSbackend ) PROTO( ( Express ) )      INITIALLY( 0 );
-GLOBAL SCL_EXPRESS_EXPORT char * EXPRESSprogram_name;
-extern char   EXPRESSgetopt_options[256];  /**< initialized elsewhere */
-GLOBAL SCL_EXPRESS_EXPORT int ( *EXPRESSgetopt ) PROTO( ( int, char * ) )    INITIALLY( 0 );
-GLOBAL SCL_EXPRESS_EXPORT bool    EXPRESSignore_duplicate_schemas       INITIALLY( false );
+extern SC_EXPRESS_EXPORT Error ERROR_bail_out;
+extern SC_EXPRESS_EXPORT Error ERROR_syntax;
+extern SC_EXPRESS_EXPORT Error ERROR_unlabelled_param_type;
+extern SC_EXPRESS_EXPORT Error ERROR_file_unreadable;
+extern SC_EXPRESS_EXPORT Error ERROR_file_unwriteable;
+extern SC_EXPRESS_EXPORT Error ERROR_warn_unsupported_lang_feat;
 
-GLOBAL SCL_EXPRESS_EXPORT Dictionary EXPRESSbuiltins;  /**< procedures/functions */
+extern SC_EXPRESS_EXPORT struct Scope_ * FUNC_NVL;
+extern SC_EXPRESS_EXPORT struct Scope_ * FUNC_USEDIN;
 
-GLOBAL SCL_EXPRESS_EXPORT Error ERROR_bail_out     INITIALLY( ERROR_none );
-GLOBAL SCL_EXPRESS_EXPORT Error ERROR_syntax       INITIALLY( ERROR_none );
-GLOBAL SCL_EXPRESS_EXPORT Error ERROR_unlabelled_param_type INITIALLY( ERROR_none );
-GLOBAL SCL_EXPRESS_EXPORT Error ERROR_file_unreadable;
-GLOBAL SCL_EXPRESS_EXPORT Error ERROR_file_unwriteable;
-GLOBAL SCL_EXPRESS_EXPORT Error ERROR_warn_unsupported_lang_feat;
-
-GLOBAL SCL_EXPRESS_EXPORT struct Scope_ * FUNC_NVL;
-GLOBAL SCL_EXPRESS_EXPORT struct Scope_ * FUNC_USEDIN;
-
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ABS         INITIALLY( "ABS" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ABSTRACT    INITIALLY( "ABSTRACT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ACOS        INITIALLY( "ACOS" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_AGGREGATE   INITIALLY( "AGGREGATE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ALIAS       INITIALLY( "ALIAS" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_AND         INITIALLY( "AND" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ANDOR       INITIALLY( "ANDOR" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ARRAY       INITIALLY( "ARRAY" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_AS          INITIALLY( "AS" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ASIN        INITIALLY( "ASIN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ATAN        INITIALLY( "ATAN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_BAG         INITIALLY( "BAG" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_BEGIN       INITIALLY( "BEGIN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_BINARY      INITIALLY( "BINARY" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_BLENGTH     INITIALLY( "BLENGTH" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_BOOLEAN     INITIALLY( "BOOLEAN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_BY          INITIALLY( "BY" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_CASE        INITIALLY( "CASE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_CONST_E     INITIALLY( "CONST_E" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_CONSTANT    INITIALLY( "CONSTANT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_CONTEXT     INITIALLY( "CONTEXT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_COS         INITIALLY( "COS" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_DERIVE      INITIALLY( "DERIVE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_DIV         INITIALLY( "DIV" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ELSE        INITIALLY( "ELSE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END         INITIALLY( "END" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_ALIAS   INITIALLY( "END_ALIAS" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_CASE    INITIALLY( "END_CASE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_CONSTANT INITIALLY( "END_CONSTANT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_CONTEXT INITIALLY( "END_CONTEXT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_ENTITY  INITIALLY( "END_ENTITY" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_FUNCTION INITIALLY( "END_FUNCTION" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_IF      INITIALLY( "END_IF" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_LOCAL   INITIALLY( "END_LOCAL" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_MODEL   INITIALLY( "END_MODEL" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_PROCEDURE INITIALLY( "END_PROCEDURE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_REPEAT  INITIALLY( "END_REPEAT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_RULE    INITIALLY( "END_RULE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_SCHEMA  INITIALLY( "END_SCHEMA" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_END_TYPE    INITIALLY( "END_TYPE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ENTITY      INITIALLY( "ENTITY" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ENUMERATION INITIALLY( "ENUMERATION" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ESCAPE      INITIALLY( "ESCAPE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_EXISTS      INITIALLY( "EXISTS" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_EXP         INITIALLY( "EXP" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_FALSE       INITIALLY( "FALSE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_FIXED       INITIALLY( "FIXED" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_FOR         INITIALLY( "FOR" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_FORMAT      INITIALLY( "FORMAT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_FROM        INITIALLY( "FROM" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_FUNCTION    INITIALLY( "FUNCTION" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_GENERIC     INITIALLY( "GENERIC" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_HIBOUND     INITIALLY( "HIBOUND" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_HIINDEX     INITIALLY( "HIINDEX" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_IF          INITIALLY( "IF" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_IN          INITIALLY( "IN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_INCLUDE     INITIALLY( "INCLUDE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_INSERT      INITIALLY( "INSERT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_INTEGER     INITIALLY( "INTEGER" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_INVERSE     INITIALLY( "INVERSE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_LENGTH      INITIALLY( "LENGTH" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_LIKE        INITIALLY( "LIKE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_LIST        INITIALLY( "LIST" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_LOBOUND     INITIALLY( "LOBOUND" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_LOCAL       INITIALLY( "LOCAL" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_LOG         INITIALLY( "LOG" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_LOG10       INITIALLY( "LOG10" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_LOG2        INITIALLY( "LOG2" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_LOGICAL     INITIALLY( "LOGICAL" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_LOINDEX     INITIALLY( "LOINDEX" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_MOD         INITIALLY( "MOD" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_MODEL       INITIALLY( "MODEL" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_NOT         INITIALLY( "NOT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_NUMBER      INITIALLY( "NUMBER" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_NVL         INITIALLY( "NVL" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ODD         INITIALLY( "ODD" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_OF          INITIALLY( "OF" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ONEOF       INITIALLY( "ONEOF" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_OPTIONAL    INITIALLY( "OPTIONAL" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_OR          INITIALLY( "OR" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_OTHERWISE   INITIALLY( "OTHERWISE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_PI          INITIALLY( "PI" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_PROCEDURE   INITIALLY( "PROCEDURE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_QUERY       INITIALLY( "QUERY" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_REAL        INITIALLY( "REAL" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_REFERENCE   INITIALLY( "REFERENCE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_REMOVE      INITIALLY( "REMOVE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_REPEAT      INITIALLY( "REPEAT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_RETURN      INITIALLY( "RETURN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_ROLESOF     INITIALLY( "ROLESOF" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_RULE        INITIALLY( "RULE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_SCHEMA      INITIALLY( "SCHEMA" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_SELECT      INITIALLY( "SELECT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_SELF        INITIALLY( "SELF" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_SET         INITIALLY( "SET" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_SIN         INITIALLY( "SIN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_SIZEOF      INITIALLY( "SIZEOF" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_SKIP        INITIALLY( "SKIP" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_SQRT        INITIALLY( "SQRT" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_STRING      INITIALLY( "STRING" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_SUBTYPE     INITIALLY( "SUBTYPE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_SUPERTYPE   INITIALLY( "SUPERTYPE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_TAN         INITIALLY( "TAN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_THEN        INITIALLY( "THEN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_TO          INITIALLY( "TO" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_TRUE        INITIALLY( "TRUE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_TYPE        INITIALLY( "TYPE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_TYPEOF      INITIALLY( "TYPEOF" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_UNIQUE      INITIALLY( "UNIQUE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_UNKNOWN     INITIALLY( "UNKNOWN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_UNTIL       INITIALLY( "UNTIL" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_USE         INITIALLY( "USE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_USEDIN      INITIALLY( "USEDIN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_VALUE       INITIALLY( "VALUE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_VALUE_IN    INITIALLY( "VALUE_IN" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_VALUE_UNIQUE INITIALLY( "VALUE_UNIQUE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_VAR         INITIALLY( "VAR" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_WHERE       INITIALLY( "WHERE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_WHILE       INITIALLY( "WHILE" );
-GLOBAL SCL_EXPRESS_EXPORT char * KW_XOR         INITIALLY( "XOR" );
-
-#undef GLOBAL
-#undef INITIALLY
+extern SC_EXPRESS_EXPORT char * KW_ABS;
+extern SC_EXPRESS_EXPORT char * KW_ABSTRACT;
+extern SC_EXPRESS_EXPORT char * KW_ACOS;
+extern SC_EXPRESS_EXPORT char * KW_AGGREGATE;
+extern SC_EXPRESS_EXPORT char * KW_ALIAS;
+extern SC_EXPRESS_EXPORT char * KW_AND;
+extern SC_EXPRESS_EXPORT char * KW_ANDOR;
+extern SC_EXPRESS_EXPORT char * KW_ARRAY;
+extern SC_EXPRESS_EXPORT char * KW_AS;
+extern SC_EXPRESS_EXPORT char * KW_ASIN;
+extern SC_EXPRESS_EXPORT char * KW_ATAN;
+extern SC_EXPRESS_EXPORT char * KW_BAG;
+extern SC_EXPRESS_EXPORT char * KW_BEGIN;
+extern SC_EXPRESS_EXPORT char * KW_BINARY;
+extern SC_EXPRESS_EXPORT char * KW_BLENGTH;
+extern SC_EXPRESS_EXPORT char * KW_BOOLEAN;
+extern SC_EXPRESS_EXPORT char * KW_BY;
+extern SC_EXPRESS_EXPORT char * KW_CASE;
+extern SC_EXPRESS_EXPORT char * KW_CONST_E;
+extern SC_EXPRESS_EXPORT char * KW_CONSTANT;
+extern SC_EXPRESS_EXPORT char * KW_CONTEXT;
+extern SC_EXPRESS_EXPORT char * KW_COS;
+extern SC_EXPRESS_EXPORT char * KW_DERIVE;
+extern SC_EXPRESS_EXPORT char * KW_DIV;
+extern SC_EXPRESS_EXPORT char * KW_ELSE;
+extern SC_EXPRESS_EXPORT char * KW_END;
+extern SC_EXPRESS_EXPORT char * KW_END_ALIAS;
+extern SC_EXPRESS_EXPORT char * KW_END_CASE;
+extern SC_EXPRESS_EXPORT char * KW_END_CONSTANT;
+extern SC_EXPRESS_EXPORT char * KW_END_CONTEXT;
+extern SC_EXPRESS_EXPORT char * KW_END_ENTITY;
+extern SC_EXPRESS_EXPORT char * KW_END_FUNCTION;
+extern SC_EXPRESS_EXPORT char * KW_END_IF;
+extern SC_EXPRESS_EXPORT char * KW_END_LOCAL;
+extern SC_EXPRESS_EXPORT char * KW_END_MODEL;
+extern SC_EXPRESS_EXPORT char * KW_END_PROCEDURE;
+extern SC_EXPRESS_EXPORT char * KW_END_REPEAT;
+extern SC_EXPRESS_EXPORT char * KW_END_RULE;
+extern SC_EXPRESS_EXPORT char * KW_END_SCHEMA;
+extern SC_EXPRESS_EXPORT char * KW_END_TYPE;
+extern SC_EXPRESS_EXPORT char * KW_ENTITY;
+extern SC_EXPRESS_EXPORT char * KW_ENUMERATION;
+extern SC_EXPRESS_EXPORT char * KW_ESCAPE;
+extern SC_EXPRESS_EXPORT char * KW_EXISTS;
+extern SC_EXPRESS_EXPORT char * KW_EXP;
+extern SC_EXPRESS_EXPORT char * KW_FALSE;
+extern SC_EXPRESS_EXPORT char * KW_FIXED;
+extern SC_EXPRESS_EXPORT char * KW_FOR;
+extern SC_EXPRESS_EXPORT char * KW_FORMAT;
+extern SC_EXPRESS_EXPORT char * KW_FROM;
+extern SC_EXPRESS_EXPORT char * KW_FUNCTION;
+extern SC_EXPRESS_EXPORT char * KW_GENERIC;
+extern SC_EXPRESS_EXPORT char * KW_HIBOUND;
+extern SC_EXPRESS_EXPORT char * KW_HIINDEX;
+extern SC_EXPRESS_EXPORT char * KW_IF;
+extern SC_EXPRESS_EXPORT char * KW_IN;
+extern SC_EXPRESS_EXPORT char * KW_INCLUDE;
+extern SC_EXPRESS_EXPORT char * KW_INSERT;
+extern SC_EXPRESS_EXPORT char * KW_INTEGER;
+extern SC_EXPRESS_EXPORT char * KW_INVERSE;
+extern SC_EXPRESS_EXPORT char * KW_LENGTH;
+extern SC_EXPRESS_EXPORT char * KW_LIKE;
+extern SC_EXPRESS_EXPORT char * KW_LIST;
+extern SC_EXPRESS_EXPORT char * KW_LOBOUND;
+extern SC_EXPRESS_EXPORT char * KW_LOCAL;
+extern SC_EXPRESS_EXPORT char * KW_LOG;
+extern SC_EXPRESS_EXPORT char * KW_LOG10;
+extern SC_EXPRESS_EXPORT char * KW_LOG2;
+extern SC_EXPRESS_EXPORT char * KW_LOGICAL;
+extern SC_EXPRESS_EXPORT char * KW_LOINDEX;
+extern SC_EXPRESS_EXPORT char * KW_MOD;
+extern SC_EXPRESS_EXPORT char * KW_MODEL;
+extern SC_EXPRESS_EXPORT char * KW_NOT;
+extern SC_EXPRESS_EXPORT char * KW_NUMBER;
+extern SC_EXPRESS_EXPORT char * KW_NVL;
+extern SC_EXPRESS_EXPORT char * KW_ODD;
+extern SC_EXPRESS_EXPORT char * KW_OF;
+extern SC_EXPRESS_EXPORT char * KW_ONEOF;
+extern SC_EXPRESS_EXPORT char * KW_OPTIONAL;
+extern SC_EXPRESS_EXPORT char * KW_OR;
+extern SC_EXPRESS_EXPORT char * KW_OTHERWISE;
+extern SC_EXPRESS_EXPORT char * KW_PI;
+extern SC_EXPRESS_EXPORT char * KW_PROCEDURE;
+extern SC_EXPRESS_EXPORT char * KW_QUERY;
+extern SC_EXPRESS_EXPORT char * KW_REAL;
+extern SC_EXPRESS_EXPORT char * KW_REFERENCE;
+extern SC_EXPRESS_EXPORT char * KW_REMOVE;
+extern SC_EXPRESS_EXPORT char * KW_REPEAT;
+extern SC_EXPRESS_EXPORT char * KW_RETURN;
+extern SC_EXPRESS_EXPORT char * KW_ROLESOF;
+extern SC_EXPRESS_EXPORT char * KW_RULE;
+extern SC_EXPRESS_EXPORT char * KW_SCHEMA;
+extern SC_EXPRESS_EXPORT char * KW_SELECT;
+extern SC_EXPRESS_EXPORT char * KW_SELF;
+extern SC_EXPRESS_EXPORT char * KW_SET;
+extern SC_EXPRESS_EXPORT char * KW_SIN;
+extern SC_EXPRESS_EXPORT char * KW_SIZEOF;
+extern SC_EXPRESS_EXPORT char * KW_SKIP;
+extern SC_EXPRESS_EXPORT char * KW_SQRT;
+extern SC_EXPRESS_EXPORT char * KW_STRING;
+extern SC_EXPRESS_EXPORT char * KW_SUBTYPE;
+extern SC_EXPRESS_EXPORT char * KW_SUPERTYPE;
+extern SC_EXPRESS_EXPORT char * KW_TAN;
+extern SC_EXPRESS_EXPORT char * KW_THEN;
+extern SC_EXPRESS_EXPORT char * KW_TO;
+extern SC_EXPRESS_EXPORT char * KW_TRUE;
+extern SC_EXPRESS_EXPORT char * KW_TYPE;
+extern SC_EXPRESS_EXPORT char * KW_TYPEOF;
+extern SC_EXPRESS_EXPORT char * KW_UNIQUE;
+extern SC_EXPRESS_EXPORT char * KW_UNKNOWN;
+extern SC_EXPRESS_EXPORT char * KW_UNTIL;
+extern SC_EXPRESS_EXPORT char * KW_USE;
+extern SC_EXPRESS_EXPORT char * KW_USEDIN;
+extern SC_EXPRESS_EXPORT char * KW_VALUE;
+extern SC_EXPRESS_EXPORT char * KW_VALUE_IN;
+extern SC_EXPRESS_EXPORT char * KW_VALUE_UNIQUE;
+extern SC_EXPRESS_EXPORT char * KW_VAR;
+extern SC_EXPRESS_EXPORT char * KW_WHERE;
+extern SC_EXPRESS_EXPORT char * KW_WHILE;
+extern SC_EXPRESS_EXPORT char * KW_XOR;
 
 /******************************/
 /* macro function definitions */
@@ -265,14 +247,16 @@ GLOBAL SCL_EXPRESS_EXPORT char * KW_XOR         INITIALLY( "XOR" );
 /* function prototypes */
 /***********************/
 
-extern SCL_EXPRESS_EXPORT Express  EXPRESScreate PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT void     EXPRESSparse PROTO( ( Express, FILE *, char * ) );
-extern SCL_EXPRESS_EXPORT void     EXPRESSinitialize PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT void     EXPRESSresolve PROTO( ( Express ) );
-extern SCL_EXPRESS_EXPORT char  *  EXPRESSversion PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT int      EXPRESS_fail PROTO( ( Express ) );
-extern SCL_EXPRESS_EXPORT int      EXPRESS_succeed PROTO( ( Express ) );
+extern SC_EXPRESS_EXPORT Express  EXPRESScreate PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void     EXPRESSdestroy PROTO( ( Express ) );
+extern SC_EXPRESS_EXPORT void     EXPRESSparse PROTO( ( Express, FILE *, char * ) );
+extern SC_EXPRESS_EXPORT void     EXPRESSinitialize PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void     EXPRESScleanup PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT void     EXPRESSresolve PROTO( ( Express ) );
+extern SC_EXPRESS_EXPORT char  *  EXPRESSversion PROTO( ( void ) );
+extern SC_EXPRESS_EXPORT int      EXPRESS_fail PROTO( ( Express ) );
+extern SC_EXPRESS_EXPORT int      EXPRESS_succeed PROTO( ( Express ) );
 extern void     EXPRESSinit_init PROTO( ( void ) );
-extern SCL_EXPRESS_EXPORT void     build_complex( Express );
+extern SC_EXPRESS_EXPORT void     build_complex( Express );
 
 #endif /*EXPRESS_H*/